Pinching-Antenna Systems-Enabled Multi-User Communications: Transmission Structures and Beamforming Optimization

Jingjing Zhao, Haowen Song, Xidong Mu, Kaiquan Cai, Yanbo Zhu, Yuanwei Liu

TL;DR

This paper introduces a framework for multi-user communication using Pinching-Antenna Systems (PASS), a novel flexible-antenna technology where radiating elements can be physically moved along dielectric waveguides. By proposing three distinct transmission architectures and a joint optimization algorithm for baseband and "pinching" beamforming, the authors demonstrate that PASS can significantly outperform traditional fixed-position MIMO systems in both unicast and multicast scenarios.

What Problem Does This Paper Address?

As we look toward 6G, traditional Multiple-Input Multiple-Output (MIMO) systems face a fundamental bottleneck: their antennas are fixed in space. While technologies like Reconfigurable Intelligent Surfaces (RIS) and Movable Antennas (MA) offer some flexibility, they often struggle with large-scale path loss and line-of-sight (LoS) blockages.

Pinching-Antenna Systems (PASS) offer a different approach. Prototyped by NTT DOCOMO, PASS uses low-loss dielectric waveguides as a transmission medium. Small dielectric particles (the "pinching antennas") are attached to the waveguide and can be moved to any position along its length. This allows the system to physically "follow" users or reposition itself to avoid obstacles. However, most research has focused on single-waveguide, single-user setups. This paper tackles the complexity of multi-waveguide, multi-user environments, where interference management and physical antenna positioning must be optimized simultaneously.

Methods

The authors propose three practical transmission structures for multi-waveguide PASS:

  1. Waveguide Multiplexing (WM): Data streams are multiplexed at the baseband and fed into all waveguides. This offers the highest flexibility but the most complex design.
  2. Waveguide Division (WD): Each data stream is assigned to a specific waveguide. This simplifies baseband processing to basic power allocation.
  3. Waveguide Switching (WS): Users are served in orthogonal time slots. This eliminates multi-user interference but requires high-precision time synchronization.

To optimize these systems, the authors formulate a Max-Min Fairness (MMF) problem, aiming to maximize the data rate of the "weakest" user. Because the math involves highly coupled, non-convex variables (digital beamforming weights vs. physical antenna coordinates), they employ a Penalty Dual Decomposition (PDD) algorithm. This approach breaks the complex problem into manageable sub-problems that can be solved iteratively. For the specific case of unicast communication under the WS structure, they also provide a low-complexity algorithm that aligns signal phases while minimizing path loss.

Datasets

As a theoretical and optimization-focused study, the paper does not use external real-world datasets. Instead, it utilizes a rigorous simulation environment:

  • Setup: A 28 GHz carrier frequency (mmWave) with waveguides up to 10 meters long.
  • Environment: Users are randomly distributed within defined rectangular areas to simulate realistic deployment scenarios like airports or tunnels.
  • Baselines: The system is compared against conventional fixed-position MIMO using both fully-digital and hybrid beamforming architectures.

Key Insights and Ideas

  • The "Last-Meter" Advantage: Unlike fixed arrays, PASS waveguides can be deployed in long, narrow environments (like tunnels). Because the antennas can slide along the waveguide, they can achieve "last-meter" proximity to users, drastically reducing path loss.
  • Degrees of Freedom: PASS introduces a new degree of freedom—physical position. "Pinching beamforming" isn't just about adjusting phases; it’s about optimizing the geometry of the array in real-time.
  • Architecture Matters: The study finds that Waveguide Switching (WS) is superior for unicast (one-to-one) because it can tailor antenna positions for each user individually. Conversely, Waveguide Multiplexing (WM) is better for multicast (one-to-many) because it utilizes all time resources for the entire group.
  • Spatial Isolation: If users are geographically far apart, the performance gap between the simple WD structure and the complex WM structure shrinks, suggesting that simpler hardware might suffice in sparse environments.

Key Results

  • Massive Rate Gains: In a multicast scenario with a 20 dBm power budget, PASS (using WM) achieved a minimum data rate of approximately 11.5 bps/Hz, compared to just 2 bps/Hz for conventional fully-digital MIMO.
  • Robustness to Dispersion: As users spread out, fixed MIMO performance drops sharply due to increased path loss. PASS maintains a much higher and more stable rate because the antennas can move closer to the dispersed users.
  • Scaling: Increasing the number of pinching antennas (PAs) on a waveguide consistently improves performance, as it provides higher spatial resolution for beamforming.

Limitations and Future Work

  • Hardware Imperfections: The authors acknowledge that fabrication errors in the waveguides or PA positioning could degrade performance, requiring high-precision sensors.
  • Activation Latency: Moving physical particles takes time. The system must be fast enough to reconfigure within the "channel coherence time" (the window where the wireless environment stays stable).
  • Synchronization: The Waveguide Switching (WS) model requires extremely tight time synchronization across users, which increases implementation overhead.
  • Future Directions: The authors suggest exploring PASS for Integrated Sensing and Communication (ISAC) and physical layer security, where the ability to physically move antennas could be used to create "nulls" in the direction of eavesdroppers.

Summary updated

Abstract

Pinching-antenna systems (PASS) represent an innovative advancement in flexible-antenna technologies, aimed at significantly improving wireless communications by ensuring reliable line-of-sight connections and dynamic antenna array reconfigurations. To employ multi-waveguide PASS in multi-user communications, three practical transmission structures are proposed, namely waveguide multiplexing (WM), waveguide division (WD), and waveguide switching (WS). Based on the proposed structures, the joint baseband signal processing and pinching beamforming design is studied for a general multi-group multicast communication system, with the unicast communication encompassed as a special case. A max-min fairness (MMF) problem is formulated for each proposed transmission structure, subject to the maximum transmit power constraint. For WM, to solve the highly-coupled and non-convex MMF problem with complex exponential and fractional expressions, a penalty dual decomposition (PDD)-based algorithm is invoked for obtaining locally optimal solutions. Specifically, the augmented Lagrangian relaxation is first applied to alleviate the stringent coupling constraints, which is followed by the block decomposition over the resulting augmented Lagrangian function. Then, the proposed PDD-based algorithm is extended to solve the MMF problem for both WD and WS. Furthermore, a low-complexity algorithm is proposed for the unicast case employing the WS structure, by simultaneously aligning the signal phases and minimizing the large-scale path loss at each user. Finally, numerical results reveal that: 1) the MMF performance is significantly improved by employing the PASS compared to conventional fixed-position antenna systems; 2) WS and WM are suitable for unicast and multicast communications, respectively; 3) the performance gap between WD and WM can be significantly alleviated when the users are geographically isolated.
BibTeX
@article{zhao2025pinching,
  author = {Jingjing Zhao and Haowen Song and Xidong Mu and Kaiquan Cai and Yanbo Zhu and Yuanwei Liu},
  title = {{Pinching-Antenna Systems-Enabled Multi-User Communications: Transmission Structures and Beamforming Optimization}},
  journal = {IEEE Transactions on Communications},
  year = {2025},
  doi = {10.1109/tcomm.2025.3643993},
}
Figure