Pinching-Antenna System (PASS)-enabled Multicast Communications

Xidong Mu, Guangyu Zhu, Yuanwei Liu

Introduction

As wireless networks evolve toward 6G, the demand for efficient multicast communication—delivering the same content to multiple users simultaneously—is growing. A significant bottleneck in multicast systems is the "weakest link" problem, where the overall transmission rate is limited by the user with the poorest channel conditions. Traditional fixed-antenna systems often fail to provide uniform coverage, especially in dynamic environments. This paper explores the Pinching-Antenna System (PASS), a novel flexible-antenna technology that leverages movable radiating elements on a waveguide to optimize signal delivery for all users in a multicast group.

System Architecture

The PASS framework utilizes a dielectric waveguide connected to a base station. Along this waveguide, multiple "Pinching Antennas" (PAs) can be physically repositioned. Unlike conventional systems where signals attenuate significantly over distance, PASS keeps the signal confined within a low-loss waveguide until it reaches a PA positioned optimally relative to the users.

The PASS system model featuring a dielectric waveguide with movable pinching antennas serving multiple ground users.

By sliding these PAs to specific coordinates along the waveguide, the system can create high-quality Line-of-Sight (LoS) links. This physical adaptability allows the system to "shorten" the effective air-propagation distance, significantly boosting the Signal-to-Noise Ratio (SNR) for the most disadvantaged users.

Methodology and Optimization

To maximize the multicast rate, the researchers formulated an optimization problem aimed at maximizing the minimum SNR among all users. Given the non-convex nature of antenna positioning, a modified Particle Swarm Optimization (PSO) algorithm was employed. This algorithm incorporates a penalty function to prevent physical collisions between antennas and ensures they remain within the waveguide's boundaries. The study simulated a 28 GHz mmWave environment with users distributed across varying area sizes ranging from $5 \times 5$ to $15 \times 15$ meters.

Key Results

The simulation results indicate that PASS consistently outperforms traditional Multiple-Input Multiple-Output (MIMO) systems with fixed antennas. The performance advantage is particularly pronounced when the number of antennas is small.

Multicast rate comparison between PASS and conventional systems across different service area sizes, highlighting the "PASS gain."

As shown in the figure above, PASS provides a substantial "PASS gain" in multicast rates. While performance naturally declines as the service area ($L$) increases, PASS maintains a higher rate than conventional systems by adapting its geometry to the users' spatial distribution. For instance, with only two antennas ($N=2$), PASS achieves a rate comparable to a conventional system with ten antennas ($N=10$) in larger areas, highlighting its hardware efficiency.

Conclusion and Future Outlook

PASS represents a promising shift from static to fluid antenna architectures. By physically moving radiating elements, it overcomes the limitations of fixed-position antennas in multicast scenarios. Future research will focus on addressing the complexities of non-Line-of-Sight environments, real-time optimization for mobile users, and the mechanical engineering challenges of high-speed antenna repositioning.

Summary updated

BibTeX
@misc{mu2025pinching,
  author = {Xidong Mu and Guangyu Zhu and Yuanwei Liu},
  title = {{Pinching-Antenna System (PASS)-enabled Multicast Communications}},
  year = {2025},
  eprint = {2502.16624},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2502.16624},
}
Figure