Physics-Informed Machine Learning for Modeling CO 2 Capture from Scarce Data

Mickael Gault, Pierre Bachaud, Benoît Celse, Rémi Emonet, Marc Sebban

In the race to hit net-zero targets, carbon capture and storage (CCS) is a non-negotiable piece of the puzzle. One of the most mature technologies for this is amine-based post-combustion capture, where $CO_2$ is "scrubbed" from flue gas in massive absorption columns. However, modeling these columns at an industrial scale is a nightmare: the physics are incredibly complex (intertwined thermodynamics and kinetics), and real-world industrial data is notoriously scarce and expensive to collect.

A new paper from researchers at Université Jean Monnet and IFP Energies nouvelles, titled "Physics-Informed Machine Learning for Modeling $CO_2$ Capture from Scarce Data," proposes a clever middle ground. By blending the "rules" of physics with the flexibility of neural networks, they’ve created a model that is faster than traditional simulations and more accurate than standard AI.

TL;DR

Researchers developed a Physics-Informed Machine Learning (PiML) surrogate model for $CO_2$ absorption columns that mirrors the physical structure of the industrial process. By embedding the ideal gas law and a countercurrent flow architecture, the model achieves high accuracy even when trained on as few as 20 data points—a regime where standard machine learning completely fails.

What Problem Does This Paper Address?

Engineers typically use mechanistic models (complex systems of partial differential equations) to simulate $CO_2$ capture. While accurate in a lab, these models often struggle to reflect the "messiness" of industrial-scale operations and can take minutes to run a single scenario, making real-time control impossible.

On the flip side, purely data-driven models (standard Deep Learning) are fast but "physics-blind." They require massive amounts of data to learn how a column behaves. In the industrial world, where you might only have a few dozen high-quality observations from a pilot plant like the DMX™ demonstrator in Dunkirk, standard AI simply doesn't have enough information to generalize.

Methods

The authors introduce a hybrid PiML architecture that incorporates physical knowledge at three distinct levels:

  1. Structural Prior (The Architecture): Instead of a standard "black box" neural network, they designed the network to mimic the physical column. The column is split into blocks (representing packed beds). The network uses a countercurrent flow learning process: gas features propagate upward through the blocks while liquid features propagate downward.
  2. Simulation Pre-training: The model is first trained on a large set of data generated by an existing (but imperfect) mechanistic solver. This gives the network a "baseline" understanding of the physics.
  3. Physical Law Regularization: They added the Ideal Gas Law ($PV=nRT$) directly into the loss function. This acts as a "soft constraint," penalizing the model if it makes predictions that are physically impossible.
  4. Iterative Inference: Because the gas and liquid affect each other simultaneously, the model uses an iterative scheme at test time to reach a steady-state prediction for the entire column.

Datasets

The study utilized two primary datasets:

  • $D_1$ (Initial Dataset): 600 samples generated from a mechanistic solver based purely on laboratory-scale physics.
  • $D_2$ (Corrected Dataset): 200 samples from a version of the model updated with empirical correlations to match real-world observations from the DMX™ demonstrator in Dunkirk, France. This represents the "ground truth" the model aims to reach.

Key Insights and Ideas

  • Architecture as Information: The most significant "aha moment" is that the flow of information in the neural network should match the flow of fluids in the machine. By forcing a countercurrent structure, the model inherently understands how a change at the bottom of the column affects the top.
  • The Power of Fine-Tuning: You don't need to learn the physics from scratch. By pre-training on "imperfect" physics and fine-tuning on "real" (corrected) data, the model learns to bridge the gap between theory and reality.
  • Robustness in Scarcity: The physics constraints act as a "safety rail." When data is scarce, the model relies on the Ideal Gas Law and the structural prior to stay on track, preventing the wild, nonsensical predictions typical of overfitted neural networks.

Key Results

The researchers compared their Corrected PiML Surrogate against the initial mechanistic model and a standard data-driven MLP.

  • Superior Accuracy: In a "low data" regime (training on only 20 samples), the PiML model maintained an $R^2$ score (a measure of fit) near 0.8 to 0.9 for key outputs like $CO_2$ capture rate.
  • Data Efficiency: The standard data-driven model was completely unusable with small datasets (often producing negative $R^2$ scores), while the PiML model outperformed the original mechanistic model it was based on.
  • Error Reduction: Parity plots (comparing predicted vs. actual values) showed that the PiML model's Mean Squared Error (MSE) was often an order of magnitude lower than the competing methods.

Limitations and Future Work

While promising, the authors note a few areas for growth:

  • Model Expressiveness: The current building block is a simple Multi-Layer Perceptron (MLP). They suggest that using more advanced structures, like Recurrent Neural Networks (RNNs) or Transformers, could better capture the complex dynamics.
  • Deeper Physics Integration: Currently, only the Ideal Gas Law is used as a hard constraint. Integrating more complex PDEs (like mass and heat transfer equations) is difficult because they rely on many hidden parameters, but it remains a goal for future iterations.
  • Real-World Noise: The "corrected" data used was still simulated (albeit corrected by empirical real-world data). Testing the model on raw, noisy sensor data from an active industrial site is the ultimate next step.

Paper Citation: Mickaël Gault, Pierre Bachaud, Benoît Celse, Rémi Emonet, Marc Sebban. Physics-Informed Machine Learning for Modeling $CO_2$ Capture from Scarce Data. 37th IEEE International Conference on Tools with Artificial Intelligence (ICTAI 2025). hal-05313730

Summary updated

Abstract

Accurate modeling of complex industrial processes often relies on costly mechanistic simulations grounded in physical principles. In this paper, we investigate the subject of <tex xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">$\text{CO}_{2}$</tex> capture, a major environmental challenge, through the absorption column of an amine-based post-combustion process. The modeling of such unit at industrial scale faces two difficulties: (i) theoretical models, efficient at laboratory scale, might fail to fully reflect the complexity of the numerous intertwined phenomena occurring in the absorber, (ii) the cost and uncertainty of industrial observation data make purely data-driven approaches unfeasible. To tackle both this low data regime and inaccurate physical models, we envision this <tex xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">$\text{CO}_{2}$</tex> capture problem through the lens of Physics-informed Machine Learning (PiML). We present a hybrid (data+knowledge) model where the scarce observation data complement the physical model, while the latter ensures that the predictions remain physically consistent. Beyond the standard use of simulation data for learning and the embedding of physical laws as regularization, the originality of our PiML algorithm compared to other methods in the literature lies in a physical prior assumption about the network architecture and its countercurrent flow learning process inspired by the column's operation. Our experimental results showcase a significant improvement in accuracy and highlight the potential of our augmented model for generalizing across domains, especially when data is scarce.
BibTeX
@inproceedings{gault2025physics,
  author = {Mickael Gault and Pierre Bachaud and Benoît Celse and Rémi Emonet and Marc Sebban},
  title = {{Physics-Informed Machine Learning for Modeling CO <sub>2</sub> Capture from Scarce Data}},
  booktitle = {ICTAI},
  year = {2025},
  doi = {10.1109/ictai66417.2025.00207},
}
Figure