Abstract
Nano-air-channel devices (NACDs) utilize ballistic electron transport in a quasi-vacuum channel, offering a unique bridge between vacuum electronics and solid-state nanoelectronics. However, achieving high-frequency operation has been hindered by low emission currents and high impedance. This study presents the first experimental demonstration of NACDs operating as photomixers in the terahertz (THz) regime, specifically from 120 GHz to 260 GHz. By employing a vertical InP/InGaAs heterojunction photocathode and a 50 nm air channel, researchers achieved a 375-fold increase in field-emission current under laser irradiation and an internal quantum efficiency of 1600%. These devices remain stable at temperatures up to 250 °C, positioning them as robust candidates for 6G communications and high-resolution radar.
Introduction: Bridging the Terahertz Gap
The "Terahertz Gap"—the spectral region between microwave and infrared frequencies—holds immense potential for high-speed wireless communication and imaging. However, traditional electronic devices suffer from electron scattering in semiconductors, while vacuum electronics are often too bulky for integration. Nano-air-channel devices (NACDs) provide a solution by allowing electrons to travel ballistically across a tiny air gap at ambient pressure, effectively mimicking a vacuum environment on a chip. Despite their promise, NACDs have historically been limited to MHz-range operation due to high impedance and low current. Until now, experimental demonstration of NACDs working beyond 100 GHz remained an elusive goal.
Device Architecture and Fabrication
To overcome these limitations, a novel vertical configuration NACD was developed using a wafer-scale manufacturing process. The device features an InP/InGaAs heterojunction photocathode designed to generate and accelerate photoelectrons into a precise 50 nm nano-air channel. This channel is created by wet-etching a sacrificial silicon dioxide ($SiO_2$) layer between the cathode and a metal anode.
The vertical design minimizes the transit distance, allowing for ultrafast electron transport. Because the 50 nm gap is significantly shorter than the mean free path of electrons in air, the transport remains ballistic even at room pressure, eliminating the need for complex vacuum packaging.
Photoenhanced Emission and Carrier Multiplication
A key innovation in this work is the use of a 1550 nm continuous-wave (CW) laser to enhance field emission. Upon irradiation, the device showed a 375-fold increase in current compared to dark conditions, reaching a maximum of 1.56 mA. Most remarkably, the researchers reported an internal quantum efficiency (IQE) of up to 1600%.
This "super-efficiency" is attributed to carrier multiplication within the heterojunction. By engineering the InP/InGaAs interface to create a massive localized electric field (~2.5 MV/cm), a single photoelectron can trigger impact ionization, releasing multiple secondary electrons. This mechanism drastically boosts the output current, addressing one of the primary bottlenecks in NACD performance.
Terahertz Generation and Performance
Using laser heterodyning—where two CW lasers with slightly different wavelengths create a "beat" frequency—the team successfully modulated the electron emission to generate coherent THz signals. The device operated across a frequency range of 120 GHz to 260 GHz, marking the first time an NACD has surpassed the 100 GHz threshold.
The electron transit time across the air gap was calculated to be approximately 75 femtoseconds. This rapid transit suggests that the device's theoretical operating limit could extend well into the multi-THz range, potentially reaching up to 4 THz with further optimization of the RF circuitry and reduction of series resistance.
Thermal Robustness and Future Outlook
Beyond its frequency performance, the NACD demonstrated exceptional thermal stability. While standard semiconductor photodiodes often degrade at high temperatures, these devices maintained stable field-emission characteristics at temperatures as high as 250 °C. This robustness makes them suitable for harsh environments where conventional electronics might fail.
While the current output power (~-45 dBm at 200 GHz) is lower than state-of-the-art commercial uni-travelling-carrier photodiodes (UTC-PDs), it represents a significant improvement over previous plasmonic detectors. Future work will focus on energy-band engineering and integrating the devices with on-chip antennas for 6G wireless transmitters and high-resolution radar systems.
Summary updated