Phase-Insensitive Scattering of Terahertz Radiation

M. Petev, Niclas Westerberg, E. Rubino, David Moss, A. Couairon, François Légaré, Roberto Morandotti, Daniele Faccio, Matteo ClericiarXiv 2014 · DOI · arXiv

Abstract: The nonlinear interaction between Near-Infrared (NIR) and Terahertz pulses is principally investigated as a means for the detection of radiation in the hardly accessible THz spectral region. Most studies have targeted second-order nonlinear processes, given their higher efficiencies, and only a limited number have addressed third-order nonlinear interactions, mainly investigating four-wave mixing in air for broadband THz detection. We have studied the nonlinear interaction between THz and NIR pulses in solid-state media (specifically diamond), and we show how the former can be frequency-shifted up to UV frequencies by the scattering from the nonlinear polarisation induced by the latter. Such UV emission differs from the well-known electric-field-induced second harmonic (EFISH) one, as it is generated via a phase-insensitive scattering, rather than a sum- or difference-frequency four-wave-mixing process.

Introduction

The "THz Gap"—the region of the electromagnetic spectrum between microwaves and infrared light—has long been difficult to work with due to a lack of efficient sources and detectors. To "see" THz radiation, scientists often use nonlinear optics to shift THz frequencies into the visible or near-infrared (NIR) range, where high-quality silicon detectors exist.

Most current methods rely on second-order nonlinearities or specific third-order processes like Electric Field-Induced Second Harmonic (EFISH) generation. However, these processes have limitations in bandwidth and efficiency. This research investigates what happens at very high laser intensities in solid-state materials (specifically diamond), where standard models like EFISH fail to explain newly observed spectral features.

Experimental Methodology

The researchers combined high-intensity experimental physics with sophisticated numerical modeling. They used a Ti:sapphire laser to produce intense 790 nm "pump" pulses and a separate setup to generate broadband THz "seed" pulses. Both were focused into a 500 $\mu$m thick diamond crystal. The output spectrum was measured using an imaging spectrometer and a CCD camera.

Experimental setup for THz-NIR interaction in diamond and the generated THz pulse characteristics.

To explain their findings, they used two distinct numerical approaches: Pseudospectral Space Domain (PSSD) algorithms to solve full nonlinear Maxwell equations, and Nonlinear Envelope Equations (NEE) to account for pulse propagation. They applied a theoretical framework where the intense NIR pulse creates a moving refractive index perturbation (a shock front), testing if the THz radiation scattered off this moving "wall" using a specific momentum conservation relation.

Key Results and Discussion

At low intensities, the system behaves as expected, showing EFISH signals (sum and difference frequency generation). However, at high intensities (e.g., 10 $\mu$J pump energy), a new, unexpected peak appears at approximately 430 nm.

Experimental spectra showing the emergence of the phase-insensitive (PI) scattering peak at 430 nm under high pump energy.

This 430 nm signal, identified as Phase-Insensitive (PI) scattering, arises because the intense NIR pump pulse undergoes "self-steepening," creating a sharp change in the refractive index that moves through the diamond at the pulse's group velocity. The THz pulse scatters off this moving boundary. Unlike standard four-wave mixing, which requires strict phase-matching between all involved waves, this scattering is "phase-insensitive." The frequency of the scattered light is determined primarily by the velocity of the pump pulse ($v_p$) and the dispersion of the material, following the momentum conservation equation: $k(\omega_{scatter}) - \omega_{scatter}/v_p = k(\omega_{seed}) - \omega_{seed}/v_p$.

Through systematic experimentation, the authors ruled out fluorescence, Raman scattering, and residual pump fields as the source of the 430 nm signal. The amplitude of the PI scattering signal was found to be comparable to the standard EFISH signal, suggesting it could be a practical tool for THz detection.

Conclusion and Future Outlook

The demonstration of phase-insensitive scattering in diamond offers a new physical mechanism for detecting and manipulating THz waves. While the effect requires high pump intensities to induce shock-front formation, it provides a pathway for designing new types of broadband THz detectors. Future research may explore different materials or pulse-shaping techniques to tune the scattered UV frequency or enhance conversion efficiency further.

Summary updated

Abstract

The nonlinear interaction between Near-Infrared (NIR) and Terahertz pulses is principally investigated as a means for the detection of radiation in the hardly accessible THz spectral region. Most studies have targeted second-order nonlinear processes, given their higher efficiencies, and only a limited number have addressed third-order nonlinear interactions, mainly investigating four-wave mixing in air for broadband THz detection. We have studied the nonlinear interaction between THz and NIR pulses in solid-state media (specifically diamond), and we show how the former can be frequency-shifted up to UV frequencies by the scattering from the nonlinear polarisation induced by the latter. Such UV emission differs from the well-known electric-field-induced second harmonic (EFISH) one, as it is generated via a phase-insensitive scattering, rather than a sum- or difference-frequency four-wave-mixing process.
BibTeX
@misc{petev2014phase,
  author = {M. Petev and Niclas Westerberg and E. Rubino and David Moss and A. Couairon and François Légaré and Roberto Morandotti and Daniele Faccio and Matteo Clerici},
  title = {{Phase-Insensitive Scattering of Terahertz Radiation}},
  year = {2014},
  eprint = {1403.6026},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/1403.6026},
}
Figure