Performance Analysis of RIS-Aided Double Spatial Scattering Modulation for mmWave MIMO Systems

Xusheng Zhu, Wen Chen, Qingqing Wu, Jun Li, Nan Cheng, Fangjiong Chen, Changle Li

Abstract

Millimeter-wave (mmWave) communications offer massive bandwidth but are hindered by high hardware costs and extreme sensitivity to blockages. This paper presents a performance analysis framework for a novel RIS-aided Double Spatial Scattering Modulation (DSSM) scheme. By integrating Reconfigurable Intelligent Surfaces (RIS) to bypass blockages and utilizing a low-complexity suboptimal detector, the proposed scheme enhances reliability and spectral efficiency. We derive closed-form expressions for the Average Bit Error Probability (ABEP) and demonstrate through Monte Carlo simulations that the RIS-DSSM approach significantly outperforms conventional spatial modulation, particularly as the number of RIS reflecting elements increases.

Introduction

Millimeter-wave (mmWave) systems typically require expensive, power-hungry RF chains. While Spatial Modulation (SM) and Spatial Scattering Modulation (SSM) reduce costs by indexing information via antenna or beam directions, they remain vulnerable to line-of-sight blockages. This research addresses these challenges by integrating Reconfigurable Intelligent Surfaces (RIS)—low-cost surfaces that steer electromagnetic waves—into a "Double" SSM framework. In this setup, information is embedded in the scattering environments of both the transmitter-to-RIS and RIS-to-receiver links, creating a robust and high-rate communication channel.

System Architecture and Methods

The proposed RIS-DSSM architecture conveys information through three distinct domains:

  1. Tx-RIS Spatial Domain: Selecting one of $N$ scatterers in the transmitter-to-RIS channel.
  2. RIS-Rx Spatial Domain: Selecting one of $M$ scatterers in the RIS-to-receiver channel.
  3. Symbol Domain: A traditional $K$-ary modulated symbol (PSK or QAM).

This multi-domain approach effectively increases the data rate to $R = \log_2(N) + \log_2(M) + \log_2(K)$.

The proposed RIS-DSSM system architecture featuring transmitter, cascaded channel with RIS, and receiver components.

Suboptimal Detector

To avoid the exhaustive search required by Maximum Likelihood (ML) detectors, the authors propose a two-stage suboptimal detector. This detector first identifies the beam direction based on received signal strength (energy detection) and then demodulates the remaining bits using ML. This approach is approximately $M$ times faster than the optimal search, making it more viable for practical hardware implementation.

Algorithm 1: The proposed low-complexity suboptimal detector for the RIS-DSSM scheme.

Key Insights and Results

  • Analytical Framework: The authors derived exact numerical integrals and closed-form expressions for the Unconditional Pairwise Error Probability (UPEP) using complex mathematical tools like Whittaker and modified Bessel functions. These were validated against link-level Monte Carlo simulations at 28 GHz.
  • Modulation Performance: Interestingly, Phase Shift Keying (PSK) performs better than Quadrature Amplitude Modulation (QAM) in this setup. The constant envelope of PSK provides greater stability against the amplitude sensitivity of the cascaded channel fading.
  • RIS Scaling: The performance advantage of RIS-DSSM over conventional SSM becomes significantly more pronounced as the number of RIS reflecting elements ($L$) increases. Increasing $L$ from 4 to 64 drastically reduces the ABEP by refining beam directionality.
  • Diversity and Complexity: The system achieves a diversity gain of 1. While the suboptimal detector requires approximately 5–7 dB more SNR than the ML detector to achieve an ABEP of $10^{-3}$, it offers a significant reduction in computational complexity.

Conclusion

The RIS-DSSM scheme provides a powerful tool for enhancing mmWave link reliability and spectral efficiency. While the current analysis assumes perfect Channel State Information (CSI) and a static environment, future work will explore the impact of channel estimation errors and high-mobility scenarios to further refine the system's practical applicability.

Summary updated

BibTeX
@article{zhu2024performance,
  author = {Xusheng Zhu and Wen Chen and Qingqing Wu and Jun Li and Nan Cheng and Fangjiong Chen and Changle Li},
  title = {{Performance Analysis of RIS-Aided Double Spatial Scattering Modulation for mmWave MIMO Systems}},
  journal = {IEEE Trans. Wireless Communications},
  year = {2024},
  doi = {10.1109/twc.2023.3330341},
}
Figure