Pattern Synthesis for Uniform Linear and Concentric Elliptical Antenna Arrays Using Kepler Optimization Algorithm

Yi Tang, J. Wan, Yixin Sun, Xiao Wang, Guoqing Ma, Chuan Liu

TL;DR

This paper introduces a novel pattern synthesis method for antenna arrays using the Kepler Optimization Algorithm (KOA). By leveraging Kepler's laws of planetary motion, the KOA effectively optimizes antenna array parameters to achieve high gain and significantly suppress unwanted sidelobe levels, outperforming existing algorithms in key metrics.

What Problem Does This Paper Address?

Designing antenna arrays with specific radiation patterns is crucial for various applications like satellite communications, radar, and military systems. A primary challenge is achieving a strong main beam (high gain) while simultaneously minimizing "sidelobes" – unwanted radiation in directions other than the intended one. High sidelobes can lead to interference, reduced signal-to-noise ratio, and decreased system performance. Traditional optimization methods often struggle with issues like slow convergence, falling into local optima, and high computational costs. This paper aims to address these limitations by proposing a new optimization algorithm, the Kepler Optimization Algorithm (KOA), for synthesizing radiation patterns for both uniform linear antenna arrays (ULAA) and concentric elliptical antenna arrays (CEAA).

Methods

The core of this paper is the introduction and application of the Kepler Optimization Algorithm (KOA) for antenna array pattern synthesis. The KOA is a meta-heuristic optimization algorithm inspired by Kepler's laws of planetary motion. It simulates the gravitational interactions between celestial bodies (candidate solutions) and a central body (the desired solution) to explore the search space. The algorithm utilizes four key operators: position, mass, gravity, and velocity, to iteratively refine candidate solutions.

To accurately model the antenna arrays and their radiation characteristics, the authors employ the full-wave Method of Moments (MoM). MoM is a powerful numerical technique that accounts for mutual coupling between antenna elements, which is essential for precise radiation performance calculations.

The KOA is applied to optimize critical parameters of the antenna arrays, including:

  • For ULAA: Amplitude, phase, and rotation of individual elements.
  • For CEAA: Ring spacing and axial ratio.

The optimization objective is to maximize the difference between the main beam gain and the peak sidelobe level (SLL), while also ensuring a satisfactory main beam gain.

Datasets

Not discussed in the paper. The paper focuses on numerical simulations and optimization rather than training on pre-existing datasets.

Key Insights and Ideas

  • Kepler's Laws as an Optimization Framework: The paper demonstrates that the fundamental principles governing planetary motion can be effectively translated into a robust optimization algorithm for complex engineering problems like antenna array design.
  • Unified Approach for Different Array Geometries: The KOA proves capable of optimizing both uniform linear arrays and more complex concentric elliptical arrays, showcasing its versatility.
  • Importance of Mutual Coupling: The explicit inclusion of MoM highlights the critical role of accurately accounting for mutual coupling between antenna elements for realistic and effective pattern synthesis.
  • KOA's Superiority in SLL Suppression: The results consistently show that the KOA achieves significantly lower sidelobe levels compared to other established optimization algorithms.

Key Results

The paper presents four numerical examples to validate the KOA's effectiveness:

  • Amplitude-Only ULAA: The KOA achieved a peak SLL suppression of over 25.77 dB, outperforming BOA, HHO, and COA.
  • Phase-Only ULAA: The KOA synthesized a pattern with a peak SLL of -1.73 dB, while maintaining a comparable main beam gain to other methods.
  • Rotation and Amplitude ULAA: The KOA achieved a peak SLL minimization of -4 dB, demonstrating its ability to optimize multiple parameters simultaneously.
  • Spacing and Axis Ratio CEAA: The KOA provided a higher gain of 26.74 dB and a lower peak SLL of 3.4 dB, with an extra peak SLL suppression of up to 3.95 dB compared to other algorithms.

In general, the KOA consistently demonstrated high gain and superior sidelobe suppression capabilities across all tested scenarios.

Limitations and Future Work

Limitations: * The paper focuses on specific types of antenna arrays (ULAA and CEAA). The applicability of KOA to other array configurations (e.g., planar, irregular) is not explored. * While MoM is used, its computational cost can be significant for very large arrays, which might limit the scalability of the KOA in such scenarios.

Future Work: * The authors suggest exploring the application of the KOA to more complex array types and scenarios. * Further investigation into optimizing the KOA's parameters and exploring its potential for other electromagnetic problems could be beneficial. * Investigating hybrid approaches combining KOA with other optimization techniques might yield even better results.

Summary updated

Abstract

In this paper, a pattern synthesis method of uniform linear and concentric elliptical antenna arrays using the Kepler optimization algorithm (KOA) is proposed. The KOA, which utilizes Kepler’s laws to predict the position and velocity of planets at arbitrary times, is first applied to deal with the optimization problems of linear and elliptical antenna arrays. Radiation patterns with high gain and low sidelobe levels (SLLs) are synthesized by optimizing the critical parameters (amplitude, phase, and rotation) of the linear arrays. Moreover, a concentric elliptical array is designed to demonstrate the capability of the KOA framework to solve complex problems and achieve the desired performance. In order to accurately consider mutual coupling between the elements, the full-wave method of moments (MoM) is used to calculate the radiation characteristics of the arrays in the optimization method. The effectiveness of the proposed method is proved by four typical examples. The results show that, compared with the butterfly optimization algorithm (BOA), Harris hawks optimization (HHO), and crayfish optimization algorithm (COA), the proposed method possesses high gain and SLL suppression capabilities, which makes it suitable for various array types.
BibTeX
@inproceedings{tang2025pattern,
  author = {Yi Tang and J. Wan and Yixin Sun and Xiao Wang and Guoqing Ma and Chuan Liu},
  title = {{Pattern Synthesis for Uniform Linear and Concentric Elliptical Antenna Arrays Using Kepler Optimization Algorithm}},
  booktitle = {Symmetry},
  year = {2025},
  doi = {10.3390/sym17101680},
}
Figure