Abstract
During the last decade, the use of airborne multi-camera systems has increased significantly. These systems enable image capture under different angles, providing visibility of lateral parts of elevated objects like buildings or trees. However, varying scale, occlusion, and perspective differences challenge image processing. From an image orientation point of view, these multi-camera systems offer the advantage of better ray intersection geometry compared to nadir-only image blocks. This paper presents results from the ISPRS/EUROSDR benchmark on multi-platform photogrammetry, focusing on tie point matching across viewing directions, the influence of oblique images on bundle adjustment, and the roles of image overlap and Ground Control Point (GCP) distribution. We confirm that height accuracy is significantly improved when all images are used and that high overlap (80/80%) provides much better object space accuracy compared to 60/60% overlap. Furthermore, modern commercial software packages perform exceptionally well on these datasets.
Introduction
Traditional aerial photogrammetry relies on nadir (straight-down) imagery, which is effective for 2D mapping but limited for 3D modeling of vertical structures. Multi-camera systems, such as the IGI Pentacam, address this by capturing one nadir and four oblique views simultaneously. While these systems provide better ray intersection geometry, they introduce challenges like perspective distortion, scale variation, and occlusions. This paper evaluates these factors using the ISPRS/EuroSDR benchmark dataset to determine how they impact the final accuracy of the 3D bundle adjustment.
Methodology and Data
The study utilizes a dataset from Dortmund, Germany, comprising 1260 images captured with an IGI Pentacam. The analysis compares two primary configurations: a "full" set with 80% forward and 80% side overlap, and a "reduced" set with 60%/60% overlap. Ground truth was established using 33 high-precision RTK-GNSS points, with 10 used as GCPs and 23 as independent check points. Several software packages, including commercial SfM suites like Pix4Dmapper and research tools like BLUH, were evaluated for their performance in Bundle Block Adjustment (BBA) with self-calibration.
Results and Analysis
The Advantage of Oblique Geometry
A key finding is that oblique images significantly enhance vertical accuracy. By providing steeper ray intersection angles, the mathematical solution for the Z-axis becomes more stable. Experimental results confirm that vertical accuracy is significantly better when the full image set is used. As shown in the comparison of RMSE values, the Z-accuracy for the nadir-only configuration is nearly three times worse than that of the full Pentacam set at ground control points.
Impact of Image Overlap and GCP Distribution
Image overlap serves as a critical buffer for accuracy. High overlap (80/80%) provides enough redundant data to mask systematic errors or suboptimal GCP placement. In contrast, 60/60% overlap configurations are much more sensitive to GCP distribution. Moving from 60/60% to 80/80% overlap can reduce random errors by a factor of 2 to 3, bringing the Z-RMSE down to approximately 10cm (roughly 1 GSD). At lower overlaps, poor GCP distribution can cause the Z-error to spike significantly, jumping from 16cm to 25cm in certain scenarios.
Discussion and Conclusion
The study highlights that while matching across opposing viewing directions remains an algorithmic challenge, current SfM software is highly capable of handling structured aerial blocks. Commercial packages often match or exceed the precision of specialized research prototypes. The results underscore that high overlap and the inclusion of oblique imagery are essential for achieving high-precision vertical accuracy. Future work will focus on improving automated matching across diverse perspectives and refining physical models for multi-camera rig synchronization.
Summary updated