Abstract
This research replaces conventional hole transport layers (HTLs) like Spiro-OMeTAD, with Cu-based delafossite materials for improved performance. CsSnI₃ and CsPbI₃ were used as absorber layers to enhance perovskite solar cells (PSCs) stability. Various PSCs were optimized by adjusting perovskite thickness, HTL thickness, and temperature to determine their influence on efficiency. The results were examined to determine the highestperforming PSC, offering insights into stable and cost-effective solar cell designs for better energy harvesting.
Introduction
Perovskite solar cells (PSCs) have emerged as a leading technology in photovoltaics due to their impressive efficiency gains and low manufacturing costs. However, long-term stability remains a significant hurdle for commercialization. Traditional PSCs often utilize organic components, such as Methylammonium cations and Spiro-OMeTAD hole transport layers (HTLs), which are prone to degradation under heat, moisture, and light.
To address these challenges, this study explores "all-inorganic" PSC designs. By replacing unstable organic layers with inorganic alternatives, researchers aim to create more robust devices. Specifically, this work investigates the use of copper-based delafossite materials ($CuMO_2$) as HTLs paired with lead-based ($CsPbI_3$) and lead-free ($CsSnI_3$) inorganic perovskite absorbers.
Methodology and Device Architecture
The researchers utilized SCAPS-1D (Solar Cell Capacitance Simulator) to numerically model the device physics. The simulated device architecture consists of a multi-layer stack: FTO front contact, ZnO electron transport layer (ETL), the perovskite absorber ($CsPbI_3$ or $CsSnI_3$), a delafossite HTL, and a Platinum (Pt) back contact.
Six different delafossite materials were evaluated as HTLs: $CuAlO_2$, $CuCoO_2$, $CuNiO_2$, $CuFeO_2$, $CuGaO_2$, and $CuCrO_2$. The simulation parameters, including bandgap, electron affinity, and carrier mobility, were sourced from established experimental literature to ensure the model's accuracy.
Performance Optimization and Key Insights
The study systematically varied the thickness of the absorber and HTL layers, as well as the operating temperature, to identify optimal configurations.
A critical finding was the trade-off associated with absorber thickness. While increasing the thickness of the $CsPbI_3$ or $CsSnI_3$ layer enhances light absorption and short-circuit current ($J_{sc}$), it also leads to a decrease in the Fill Factor (FF). This occurs because a thicker layer can create a "quasi-neutral" region where the internal electric field is weaker, thereby increasing series resistance.
Among the HTL candidates, $CuCrO_2$ consistently outperformed the others. In the lead-based $CsPbI_3$ configuration, the optimized cell achieved a power conversion efficiency (PCE) of 20.90%. Notably, the lead-free $CsSnI_3$ configuration showed even higher potential, reaching a theoretical PCE of 26.34%. This superior performance is attributed to the narrower bandgap of $CsSnI_3$, which allows for broader spectral absorption compared to $CsPbI_3$.
Thermal Stability and Limitations
Thermal sensitivity analysis revealed that all simulated cells experienced a decline in efficiency as the temperature rose from 300 K to 350 K. This degradation is primarily driven by a drop in open-circuit voltage ($V_{oc}$) caused by an increase in reverse saturation current at higher temperatures.
While these numerical results are promising, practical implementation faces challenges. Fabricating high-quality delafossite thin films often requires high-temperature processes that could potentially damage the underlying perovskite layer. Furthermore, the idealized interfaces in the simulation may not fully account for recombination losses due to lattice mismatch in real-world devices.
Conclusion
This study demonstrates that copper-based delafossite HTLs, particularly $CuCrO_2$, offer a viable path toward highly efficient and stable all-inorganic perovskite solar cells. The identified configurations not only match or exceed the performance of traditional organic-based cells but also provide the thermal and chemical stability necessary for real-world applications, including long-term reliability in harsh environments.
Summary updated