Optimal linear precoding for indoor visible light communication system

Houssem Sifaou, Ki‐Hong Park, Abla Kammoun, Mohamed‐Slim Alouini

Abstract

Visible light communication (VLC) is an emerging technique that uses light-emitting diodes (LED) to combine communication and illumination. It is considered as a promising scheme for indoor wireless communication that can be deployed at reduced costs while offering high data rate performance. In this paper, we focus on the design of the downlink of a multi-user VLC system. Inherent to multi-user systems is the interference caused by the broadcast nature of the medium. Linear precoding based schemes are among the most popular solutions that have recently been proposed to mitigate inter-user interference. This paper focuses on the design of the optimal linear precoding scheme that solves the max-min signal-to-interference-plus-noise ratio (SINR) problem. The performance of the proposed precoding scheme is studied under different working conditions and compared with the classical zero-forcing precoding. Simulations have been provided to illustrate the high gain of the proposed scheme.

Introduction

Visible Light Communication (VLC) leverages existing LED lighting infrastructure to provide high-speed wireless data transmission. Unlike traditional Radio Frequency (RF) systems, VLC utilizes the visible spectrum, offering a license-free and secure alternative for indoor networking. However, a significant challenge in multi-user VLC environments is inter-user interference (IUI) caused by the overlapping illumination footprints of multiple LED transmitters.

Illustration of a multi-user indoor VLC system where multiple LEDs serve several users simultaneously.

In a typical indoor scenario, as shown in Figure 1, multiple users may be positioned such that they receive signals from the same set of ceiling-mounted LEDs. To manage this, multi-user MIMO (MU-MIMO) techniques must be adapted. However, VLC signals are constrained to be real-valued and non-negative, and they must operate within the linear dynamic range of the LEDs to ensure consistent illumination and prevent signal clipping.

Methodology

This research proposes an Optimal Linear Precoding (OLP) scheme designed to maximize the minimum SINR among all users (max-min fairness). This approach ensures that even users in challenging positions—such as those far from a light source or in high-interference zones—receive a reliable connection.

Optimization Problem

The precoding design is formulated as a quasi-convex optimization problem. The objective is to find a precoding matrix $W$ that maximizes the minimum SINR subject to per-LED power constraints. Because VLC uses Intensity Modulation/Direct Detection (IM/DD), the power constraints are based on the $L_1$ norm of the transmitted signal to respect the peak-to-average power ratio (PAPR) of the LEDs.

Implementation

The authors employ a bisection algorithm to solve the max-min problem. In each step of the bisection, the feasibility of a target SINR is checked by solving a Second-Order Cone Program (SOCP). This method provides a globally optimal solution, unlike simpler heuristic methods like Zero-Forcing (ZF).

Performance Evaluation

The proposed OLP scheme was evaluated through numerical simulations in a $5m \times 5m \times 3m$ room with 6 LED transmitters. The performance was compared against the standard ZF precoding, which attempts to eliminate interference by inverting the channel matrix.

Robustness to User Proximity

A critical finding is the robustness of OLP in scenarios where users are clustered closely together (referred to as Case 2). In such cases, the channel matrix becomes ill-conditioned, making it difficult for ZF to nullify interference without a massive power penalty.

Comparison of per-user rate for OLP and ZF precoding across different user distribution scenarios.

As illustrated in Figure 4, OLP maintains high data rates even when users are in close proximity. In contrast, the performance of ZF drops by several orders of magnitude in Case 2. OLP achieves this by intelligently balancing interference mitigation with signal strength enhancement, rather than strictly nullifying interference at any cost.

Conclusion

The OLP scheme significantly enhances the performance of multi-user indoor VLC systems by providing a fair and robust precoding solution. While computationally more intensive than Zero-Forcing due to its iterative nature, the gains in data rate—especially in high-interference or low-SNR regimes—make it a superior choice for high-density indoor environments. Future research will focus on reducing computational complexity for real-time applications and incorporating non-line-of-sight (NLoS) components into the channel model.

Summary updated

Abstract

Visible light communication (VLC) is an emerging technique that uses light-emitting diodes (LED) to combine communication and illumination. It is considered as a promising scheme for indoor wireless communication that can be deployed at reduced costs while offering high data rate performance. In this paper, we focus on the design of the downlink of a multi-user VLC system. Inherent to multi-user systems is the interference caused by the broadcast nature of the medium. Linear precoding based schemes are among the most popular solutions that have recently been proposed to mitigate inter-user interference. This paper focuses on the design of the optimal linear precoding scheme that solves the max-min signal-to-interference-plus-noise ratio (SINR) problem. The performance of the proposed precoding scheme is studied under different working conditions and compared with the classical zero-forcing precoding. Simulations have been provided to illustrate the high gain of the proposed scheme.
BibTeX
@inproceedings{sifaou2017optimal,
  author = {Houssem Sifaou and Ki‐Hong Park and Abla Kammoun and Mohamed‐Slim Alouini},
  title = {{Optimal linear precoding for indoor visible light communication system}},
  booktitle = {ICC},
  year = {2017},
  url = {https://openreview.net/forum?id=mfjT25GqJaA},
}
Figure