Abstract
This letter studies the application of backscatter communications (BackCom) assisted non-orthogonal multiple access (BAC-NOMA) to the envisioned sixth-generation (6G) ultra-massive machine type communications (umMTC). In particular, the proposed BAC-NOMA transmission scheme can realize simultaneous energy and spectrum cooperation between uplink and downlink users, which is important to support massive connectivity and stringent energy constraints in umMTC. Furthermore, a resource allocation problem for maximizing the uplink throughput and suppressing the interference between downlink and uplink transmission is formulated as an optimization problem and the corresponding optimal resource allocation policy is obtained. Computer simulations are provided to demonstrate the superior performance of BAC-NOMA.
Introduction
As the industry looks toward 6G, ultra-massive machine-type communications (umMTC) present significant challenges, specifically the need to connect over 10 million low-power IoT devices per square kilometer. This creates two primary hurdles: extreme spectrum scarcity and severe energy constraints for battery-less or low-power sensors.
While technologies like Simultaneous Wireless Information and Power Transfer (SWIPT) have been proposed, they often involve high implementation complexity. Backscatter Communication (BackCom) offers a more mature, low-power alternative where devices modulate and reflect existing ambient signals. However, integrating BackCom into networks with active downlink users introduces a complex interference environment. This paper proposes BAC-NOMA, a hybrid architecture combining BackCom with Non-Orthogonal Multiple Access (NOMA) to maximize uplink throughput while maintaining downlink quality of service.
System Architecture and Methods
The proposed system model consists of a Full-Duplex (FD) base station, a primary downlink user ($U_0$), and multiple BackCom devices ($BD_m$).
Key Innovations
- Energy & Spectrum Cooperation: The downlink signal intended for $U_0$ serves a dual purpose: it carries data to the user and acts as the excitation wave for BackCom devices to "piggyback" their uplink data. This eliminates the need for a dedicated continuous wave, significantly improving energy efficiency.
- NOMA Integration: Unlike traditional Orthogonal Multiple Access (OMA) where devices take turns, NOMA allows multiple BackCom devices to transmit simultaneously on the same frequency, separated by power levels or channel gains.
- Optimization via Linear Programming: The initial throughput maximization problem was non-concave and difficult to solve. The authors utilized a mathematical proof (Lemma 1) to show that the complex objective function—involving exponential integral functions—is monotonic. This allowed the problem to be recast as a standard Linear Programming (LP) problem solvable via efficient tools like CVX.
Performance Evaluation
The performance of BAC-NOMA was evaluated through computer-based numerical simulations in a 5m x 5m area with devices modeled under large-scale path loss and small-scale multi-path fading.
Key Results
- Throughput and Scalability: BAC-NOMA consistently outperforms OMA. As shown in Figure 5, the aggregate throughput of BAC-NOMA increases with the number of devices ($M$), whereas OMA performance remains stagnant because devices are served sequentially. For instance, with 10 devices, the optimal BAC-NOMA scheme achieved an average sum rate significantly higher than the OMA counterpart (approx. 3.5 BPCU vs 2.0 BPCU in certain scenarios).
- Resource Allocation Impact: Optimized resource allocation provides nearly double the performance gain compared to random allocation, highlighting the importance of optimizing the reflection coefficient ($\eta_m$) for each device.
- Interference Sensitivity: The study demonstrates that the benefits of NOMA are most pronounced in systems with high-quality interference cancellation, as performance gains narrow when the FD self-interference coefficient ($\alpha$) increases.
Conclusion
BAC-NOMA presents a promising solution for 6G umMTC by leveraging existing downlink signals for low-power uplink transmission. By treating interference as a manageable constraint and optimizing reflection coefficients, the scheme achieves high spectral and energy efficiency. Future work will address the challenges of obtaining perfect Channel State Information (CSI) in massive networks and the potential of Multi-Input Multi-Output (MIMO) systems to further enhance performance.
Summary updated