Offshore renewable energies: exploring floating modular energy islands—materials, construction technologies, and life cycle assessment

Enzo Marino, Michaela Gkantou, Abdollah Malekjafarian, Seevani Bali, Charalampos Baniotopoulos, Jeroen van Beeck, Ruben Paul Borg, Niccolò Bruschi, Philip Cardiff, Eleni Chatzi, Ivan Čudina, Florea Dinu, Evangelos Efthymiou, Giulio Ferri, Helena Gervásio, Junlin Heng, Zhiyu Jiang, Stefano Lenci, Ivan Lukačević, Lance Manuel, Angela Meyer, Mariela Méndez-Morales, Adnan Osmanović, Vikram Pakrashi, Amiya Pandit, Giuseppe Rega, Davor Skejić, Luana Tesch, Viorel Ungureanu, Tarik Uzunović, Amrit Shankar VermaJournal of Ocean Engineering and Marine Energy 2025 · DOI

Abstract

Floating modular energy islands (FMEIs) are modular, interconnected floating structures designed to collectively produce, store, convert, and transport renewable energy. This review aims to establish a foundation for developing innovative approaches to sustainably harness multi-energy sources in offshore environments. It leverages existing technological expertise while exploring new solutions to address specific challenges associated with FMEIs. The review initially presents existing technologies for floating energy structures and assesses their applicability to FMEI. The structural materials that could be utilised for the construction of a floating energy island are subsequently reviewed. Next, the offshore construction technologies suitable for FMEI are reviewed. Finally, studies on the life cycle assessment of hybrid energy systems are examined, highlighting the environmental advantages of integrating multiple renewable energy sources, thereby underscoring the potential of FMEIs.

Introduction: Breaking the Energy Silos

To achieve global climate neutrality targets, such as the European Union's projected 25-fold increase in offshore wind capacity by 2030, a paradigm shift in offshore energy infrastructure is required. Currently, offshore renewable energy development is largely "siloed," with wind farms, wave energy converters, and floating solar arrays operating as independent, standalone projects. This fragmentation results in high installation costs, inefficient maritime space utilization, and significant challenges for grid integration due to the intermittent nature of individual energy sources.

Floating Modular Energy Islands (FMEIs) represent a holistic solution to these challenges. By co-locating multiple energy sources on a single, interconnected modular platform, FMEIs can mitigate intermittency and share critical infrastructure like mooring systems and transmission cables.

Schematic of a FMEI showing the integration of solar, wind, wave energy, and hydrogen production.

Structural Stability and the "Restoring Triangle"

A core technical challenge for FMEIs is maintaining stability in the dynamic marine environment. The design of these floating structures is governed by three primary stabilization mechanisms, often visualized as a "restoring triangle":

  1. Ballast-stabilized: Utilizing deep drafts (e.g., Spar buoys) to lower the center of gravity.
  2. Buoyancy-stabilized: Relying on a large water-plane area (e.g., semi-submersibles) to provide restoring force.
  3. Mooring-stabilized: Using tensioned lines (e.g., Tension Leg Platforms) to secure the structure to the seabed.
The stability triangle illustrating the three primary mechanisms for floating structure stabilization.

FMEIs must navigate complex, coupled nonlinear dynamic responses where individual modules interact with both the sea state and each other.

Advances in Materials and Manufacturing

The viability of FMEIs depends heavily on materials that can withstand aggressive chloride-rich environments while minimizing weight.

  • Ultra-High Durability Concrete (UHDC): Emerging concrete formulations offer "self-healing" properties, where micro-cracks seal themselves through chemical reactions upon contact with moisture, significantly extending the lifespan of submerged hulls.
  • Aluminum and Composites: While more expensive initially, aluminum can reduce structural weight by up to 70% compared to steel. This weight reduction cascades into smaller, less expensive floating foundations and easier decommissioning.
  • Additive Manufacturing: Wire Arc Additive Manufacturing (WAAM) is proposed for creating optimized structural nodes. These 3D-printed joints allow for complex geometries that reduce stress concentrations and fatigue, which are difficult to achieve with traditional welding.

Environmental Impact and Life Cycle Assessment (LCA)

Life Cycle Assessments of hybrid energy systems underscore the environmental advantages of the FMEI approach. Research indicates that the energy payback time for offshore wind structures is typically less than one year. Furthermore, the integration of multiple energy sources improves the overall environmental footprint by maximizing the energy yield per unit of installed infrastructure. The use of recyclable materials like aluminum and advanced composites further enhances the sustainability of these megaprojects during the decommissioning phase.

Future Outlook and Challenges

Despite the promise of FMEIs, several hurdles remain. The mechanical interconnection between modules—how they transfer loads and vibrations during extreme weather events—requires more advanced hydroelastic modeling. Additionally, there is a critical need for standardization in modular joint design to enable mass production and "plug-and-play" scalability. Moving forward, the transition from numerical simulations to large-scale pilot demonstrators will be essential to validate the synergistic benefits of integrated offshore energy hubs.

Summary updated

Abstract

Abstract Floating modular energy islands (FMEIs) are modular, interconnected floating structures designed to collectively produce, store, convert, and transport renewable energy. This review aims to establish a foundation for developing innovative approaches to sustainably harness multi-energy sources in offshore environments. It leverages existing technological expertise while exploring new solutions to address specific challenges associated with FMEIs. The review initially presents existing technologies for floating energy structures and assesses their applicability to FMEI. The structural materials that could be utilised for the construction of a floating energy island are subsequently reviewed. Next, the offshore construction technologies suitable for FMEI are reviewed. Finally, studies on the life cycle assessment of hybrid energy systems are examined, highlighting the environmental advantages of integrating multiple renewable energy sources, thereby underscoring the potential of FMEIs.
BibTeX
@article{marino2025offshore,
  author = {Enzo Marino and Michaela Gkantou and Abdollah Malekjafarian and Seevani Bali and Charalampos Baniotopoulos and Jeroen van Beeck and Ruben Paul Borg and Niccolò Bruschi and Philip Cardiff and Eleni Chatzi and Ivan Čudina and Florea Dinu and Evangelos Efthymiou and Giulio Ferri and Helena Gervásio and Junlin Heng and Zhiyu Jiang and Stefano Lenci and Ivan Lukačević and Lance Manuel and Angela Meyer and Mariela Méndez-Morales and Adnan Osmanović and Vikram Pakrashi and Amiya Pandit and Giuseppe Rega and Davor Skejić and Luana Tesch and Viorel Ungureanu and Tarik Uzunović and Amrit Shankar Verma},
  title = {{Offshore renewable energies: exploring floating modular energy islands—materials, construction technologies, and life cycle assessment}},
  journal = {Journal of Ocean Engineering and Marine Energy},
  year = {2025},
  doi = {10.1007/s40722-025-00403-y},
}
Figure