Abstract: In this letter, we study the nonlinear stability problem of converter-based power systems, where the converter dynamics are governed by a complex droop control. This complex droop control augments the well-known power-frequency (p-f) droop control, and it proves to be equivalent to the state-of-the-art dispatchable virtual oscillator control (dVOC). In this regard, it is recognized as a promising grid-forming solution to address the high penetration of converters in future power systems. In previous work, the global stability of dVOC (i.e., complex droop control) has been proven by prespecifying a nominal synchronous steady state. For a general case of non-nominal (i.e., drooped) synchronous steady states, however, the stability problem requires further investigation. In this letter, we provide parametric conditions under which a non-nominal synchronous steady state exists and the system is almost globally asymptotically stable with respect to this non-nominal synchronous steady state.
Introduction
As global energy systems transition toward renewable sources, traditional power grids dominated by massive spinning synchronous generators are being replaced by power electronic converters. These converters, which interface solar and wind farms with the grid, must now assume "grid-forming" responsibilities to maintain frequency and voltage stability.
One of the most promising control strategies for this purpose is dispatchable Virtual Oscillator Control (dVOC). Mathematically equivalent to complex droop control, dVOC offers a robust framework for synchronization. However, existing theoretical guarantees often rely on idealized assumptions: that the system operates at a perfectly balanced "nominal" state and that the network is "uniform" (where all transmission lines share the same resistance-to-inductance ratio). Real-world grids are rarely uniform and typically operate in "drooped" states where parameters deviate slightly to balance supply and demand. This paper addresses these practical complexities by providing a rigorous nonlinear stability analysis for non-nominal, non-uniform converter-based systems.
Methodology and Experimental Setup
The research utilizes a complex frequency framework, which unifies the dynamics of voltage phase (frequency) and amplitude into a single complex variable. This holistic approach allows for a more comprehensive stability analysis than treating phase and amplitude as decoupled real-valued problems.
To validate the theoretical findings, the authors employed a simulated electromagnetic transient (EMT) model of a three-bus power system. Unlike standard benchmarks, this test system was designed with non-uniform line parameters and inconsistent power setpoints to rigorously test the limits of the proposed stability conditions.
The core of the proof involves Lyapunov Stability Analysis. The authors constructed a specialized Lyapunov "energy" function adapted for non-nominal steady states and complex-valued network matrices. By proving this function consistently decreases over time until reaching a steady state, they established a mathematical guarantee of stability.
Key Insights: The Stability Margin
A primary contribution of this work is the quantification of a "stability margin." The analysis reveals that stability is highly sensitive to the network's topology, specifically the real part of the "rotated" admittance matrix. This provides physical intuition for why certain grid configurations are inherently more stable than others.
The paper introduces specific parametric conditions (Condition 3) showing that stability depends on the network being "sufficiently well-connected" and ensuring that voltage regulation is not excessively fast. Under these conditions, the system exhibits almost global asymptotic stability, meaning it will successfully synchronize from nearly any starting point, excluding a negligible set of mathematical singularities.
Results and Simulation Validation
The theoretical proofs were confirmed through dynamic simulations. The system demonstrated remarkable robustness during two critical scenarios: a "black start" and a severe fault recovery.
As shown in the simulation results, the system achieves complex-frequency synchronization within approximately 0.2 seconds during a black start. Furthermore, when subjected to a short-circuit fault at 0.6 seconds, the system does not collapse; instead, it settles into a new, stable synchronous state. This confirms that the derived parametric conditions successfully predict stable operation even under significant disturbances.
Conclusion and Future Work
This research provides the first clear parametric conditions for the existence and stability of non-nominal synchronous steady states in converter-based grids. While the proof is rigorous, future work aims to relax current constraints on voltage setpoints to cover a broader range of operating points. Additionally, the authors plan to investigate the impact of dynamic "constant power" loads (such as EV chargers) and the interaction between primary control and faster, inner-loop current controllers to further bridge the gap between theory and industrial application.
Summary updated