Multimodal, Multidimensional, and Multiscale X-ray Imaging at the National Synchrotron Light Source II

Yong S. Chu, Ivan Lee, Ryan Tappero, Mingyuan Ge, Xiaojing Huang, Xianghui Xiao, Hanfei Yan, Paul Northrup, Juergen Thieme, Andrew M. Kiss, Garth J. Williams, Yang Yang, Sarah Nicholas, Ajith Pattammattel, R. Smith, P. Ilinski, Yonghua DuSynchrotron 2020 · DOI

TL;DR

This paper showcases the advanced multimodal, multidimensional, and multiscale X-ray imaging capabilities at the National Synchrotron Light Source II (NSLS-II). These techniques allow researchers to probe complex materials and biological systems with unprecedented detail across various length scales, enabling deeper understanding of structure-property relationships and dynamic processes.

What Problem Does This Paper Address?

Modern scientific research, particularly in materials science and biology, increasingly demands the ability to study complex systems with hierarchical structures across a vast range of length scales – from nanometers to centimeters. Understanding how properties emerge from these intricate structures, how they change over time (operando/in situ), and how different chemical and physical aspects correlate requires imaging techniques that can capture multiple types of information simultaneously and at different resolutions. Traditional imaging methods often fall short, providing only a single type of contrast or operating at a limited range of scales. This paper addresses this gap by detailing the comprehensive suite of X-ray imaging capabilities at NSLS-II, designed to overcome these limitations.

Methods

The paper describes two primary X-ray imaging approaches utilized at NSLS-II:

  • Full-field Microscopy: This method illuminates the entire sample with an X-ray beam and captures a transmission image using an area detector. Transmission X-ray Microscopy (TXM) is a key example, achieving resolutions in the tens of nanometers. It's particularly well-suited for 3D imaging through tomography (collecting projection images at various angles) and can provide elemental and chemical sensitivity by analyzing X-ray Absorption Near Edge Structure (XANES) spectra for each pixel.
  • Scanning Microscopy: Here, a focused X-ray beam scans across the sample, and various signals are recorded. This approach excels at multimodal imaging, allowing simultaneous acquisition of multiple signals. Techniques include X-ray Fluorescence (XRF) for elemental distribution, Differential Phase Contrast (DPC) and Bragg diffraction for morphology and crystalline structure, and ptychography for resolutions finer than the beam size. Scanning microscopy also enables the use of more specialized signals like X-ray beam-induced current.

The paper also highlights the integration of these techniques with tomography for 3D analysis and the development of user-friendly software packages (like PyXAS) to streamline data processing and analysis.

Datasets

Not discussed in the paper. The paper focuses on the capabilities of the beamlines and presents examples of their application to various materials and biological samples, but does not detail specific datasets used for training or benchmarking in the machine learning sense.

Key Insights and Ideas

  • Synergy is Key: The paper strongly emphasizes that combining different imaging modalities (multimodal), dimensions (multidimensional), and scales (multiscale) is crucial for tackling complex scientific problems. No single technique can provide all the necessary information.
  • Hierarchical Structures Demand Multiscale Imaging: The examples of battery materials and plant-based bio-environmental research clearly illustrate how understanding phenomena at one length scale requires context from others. For instance, nanoscale defects in battery materials can impact macroscopic performance.
  • Operando/In Situ Studies are Critical: The ability to perform measurements while a sample is undergoing a process (e.g., battery charging, plant growth) is vital for understanding dynamic changes and reaction mechanisms.
  • Advancements in Light Sources and Optics Drive Progress: The paper attributes the rapid progress in X-ray imaging to enhancements in synchrotron light source brightness, focusing optics, and instrument precision.
  • Software Tools are Essential for Data Deluge: The increasing complexity and volume of data generated by these advanced techniques necessitate sophisticated data management, visualization, and analysis tools.

Key Results

The paper showcases the capabilities of five NSLS-II imaging beamlines (FXI, HXN, SRX, TES, XFM) and outlines future beamlines.

  • Resolution: Achieved resolutions range from tens of nanometers (e.g., HXN with ptychography achieving sub-10 nm) down to a few micrometers, depending on the beamline and technique.
  • Speed: Full-field imaging (FXI) offers rapid measurements, enabling sub-minute tomography. Scanning techniques can be slower but provide richer multimodal data.
  • Multimodal Capabilities: Examples include:
  • 3D oxidation state mapping of battery materials using TXM XANES tomography.
  • Simultaneous imaging of morphology, elemental distribution, and lattice distortion in battery materials and solar cells using HXN.
  • Elemental mapping and speciation of arsenic in plants using XFM, SRX, and TES.
  • 3D Imaging: Tomography is routinely applied across multiple beamlines to reconstruct 3D structures and distributions.

Limitations and Future Work

  • Limitations:
    • 3D imaging via scanning microscopy can be time-consuming, often limiting it to smaller sample volumes.
  • While XRF is excellent for elemental mapping, resolving individual S species can be challenging at certain energies due to poor signal.
  • The paper notes that some techniques, like 3D XANES imaging using scanning microscopy, are extremely rare due to long acquisition times.
  • Future Work:
    • Development of new beamlines (HEX, CDI, SXN, ARI) to further expand imaging capabilities, including higher energies, coherent diffraction imaging, and combined ARPES/RIXS with nanoscale imaging.
  • Ongoing development of nano-KB systems for SRX to achieve ~100 nm resolution.
  • Continued development of user-friendly software packages for data analysis and visualization.
  • The trend towards combining measurements to achieve a "whole greater than the sum of its parts" will continue to drive the development of more sophisticated tools and techniques.

Summary updated

Abstract

Over the last couple of decades, the synchrotron radiation research community has witnessed tremendous advancement in the field of x-ray imaging and microscopy. Continuing enhancement of the light sources’ brightness, advances in x-ray focusing optics, incorporation of precision instruments, and development of innovative imaging techniques are some of the leading contributors for the rapid progress. New imaging and microscopy beamlines, such as the ones at the National Synchrotron Light Source II (NSLS-II), a Department of Energy (DOE) Office of Science user facility located at DOE’s Brookhaven National Laboratory, are capable of performing more sophisticated and complicated measurements than ever before, either on their own or used together as a suite of tools. These sophisticated and complex measurements exhibit attributes for multimodal, multidimensional, and multiscale imaging. Recent popularity of these methods is strongly driven by the current trends in materials characterizations, where researchers desire to map out hierarchical materials structure over a large range of length scales, to understand structure-property correlation, to quantify materials structures in 3D, and/or to perform operando or in situ experiments. It is important to emphasize that “materials” under investigation are not only synthesized materials but also the natural materials. In this article, we describe multimodal, multidimensional and multiscale x-ray imaging capabilities of the NSLS-II beamlines and how these methods are used to tackle complex scientific problems.
BibTeX
@inproceedings{chu2020multimodal,
  author = {Yong S. Chu and Ivan Lee and Ryan Tappero and Mingyuan Ge and Xiaojing Huang and Xianghui Xiao and Hanfei Yan and Paul Northrup and Juergen Thieme and Andrew M. Kiss and Garth J. Williams and Yang Yang and Sarah Nicholas and Ajith Pattammattel and R. Smith and P. Ilinski and Yonghua Du},
  title = {{Multimodal, Multidimensional, and Multiscale X-ray Imaging at the National Synchrotron Light Source II}},
  booktitle = {Synchrotron},
  year = {2020},
  doi = {10.1080/08940886.2020.1751520},
}
Figure