Multi-port DC circuit breaker based on dual capacitor current limiting and energy sink

Wei Gu, Xiansi Lou, Wenzhe Yin, Qihang Huang, Shiqiang Li, Jing BianFrontiers in Energy Research 2023 · DOI

TL;DR

Researchers have developed a novel multi-port DC circuit breaker (DCCB) that uses a dual-capacitor strategy to "decouple" the process of stopping a fault current from the process of draining residual energy in the line. This design reduces fault-clearing time by nearly 30% and significantly lowers the voltage stress on expensive electrical components compared to traditional hybrid breakers.

What Problem Does This Paper Address?

As we transition to clean energy, high-voltage direct current (HVDC) grids are becoming essential for transporting power over long distances. However, DC grids have a major weakness: they have "low inertia." Unlike AC systems, where current naturally crosses zero 100 times a second, DC faults don't stop on their own and rise at terrifying speeds.

Existing multi-port circuit breakers—designed to protect multiple lines at once to save costs—often struggle with a "coupling" problem. The process of suppressing the fault current and the process of dissipating the energy left in the line happen simultaneously or are tied together. This drags out the "breaking time" (the time it takes to safely isolate the fault), risking damage to the entire grid.

Methods

The authors propose a new topology called the DC CL&EC MP-DCCB (Dual Capacitor Current Limiting & Energy Collection Multi-Port DC Circuit Breaker). Its "secret sauce" is the use of two distinct capacitors:

  1. Current-Limiting Capacitor ($C_c$): This capacitor is switched into the circuit immediately when a fault is detected to choke the growth of the fault current.
  2. Voltage-Stabilizing/Sink Capacitor ($C_v$): Normally used to keep the grid voltage steady, this capacitor is repurposed during a fault to act as an "energy sink," temporarily storing the residual energy from the faulty line.

By separating these two functions, the breaker can stop the current rise and drain the line energy more efficiently. The team validated this design using PSCAD/EMTDC, a standard industry simulation tool, modeling a four-terminal DC network to see how the breaker handles real-world fault scenarios.

Datasets

This study does not use a traditional "dataset" in the machine learning sense. Instead, it utilizes a simulated four-terminal HVDC network model. The parameters for this model (converter station specs, line resistance, and inductance) are detailed in the paper to allow for reproducibility. They compared their results against three established benchmarks:

  • The standard ABB hybrid DCCB.
  • The LR-HDCCB (a resistance-inductance current-limiting design).
  • The CC&CL-HDCCB (a capacitive commutation design).

Key Insights and Ideas

  • Decoupling is the Breakthrough: The most important insight is that you don't have to wait for the fault current to die down before you start dealing with the residual energy in the line. By using $C_v$ as a "sink," the energy is pulled away from the fault point faster.
  • Repurposing Existing Components: The design is clever because it uses the voltage-stabilizing capacitor—a component already present for grid health—to perform a second, critical job during emergencies.
  • Lowering the "Voltage Ceiling": Because the energy is absorbed into a capacitor rather than just being forced through a surge arrester, the peak voltage stress on the IGBT switches is reduced. This means you can use fewer (or lower-rated) components, which is a massive win for cost and reliability.

Key Results

The simulation results show significant improvements over existing technology:

  • Faster Isolation: The fault isolation was completed 2 ms earlier than previous multi-port designs, representing a 29.4% reduction in breaking time.
  • Lower Peak Current: The peak fault current was limited to 8.8 kA, which is 20.7% lower than the standard ABB hybrid solution.
  • Economic Efficiency: The proposed design requires only 920 IGBTs, compared to the 5,040 required by the ABB solution for similar performance. This makes it significantly more cost-effective for large-scale grid deployment.

Limitations and Future Work

While the simulation results are promising, the authors acknowledge a few hurdles:

  • Voltage Spikes: During the "commutation" stage (when the current is moving between branches), there is still a significant voltage jump that requires careful component selection.
  • Mechanical Limits: The design relies on an "ultra-fast mechanical switch" (UFD). While these are improving, the physical speed of moving parts remains a bottleneck for even faster clearing times.
  • Physical Prototyping: The current study is entirely simulation-based. The next logical step is building a scaled-down physical prototype to verify these "decoupling" effects in a laboratory environment.

Summary updated

Abstract

The coupling relationship between the removal of the fault current and the dissipation of the residual energy of the fault line during the fault isolation process of the multi-port capacitive current-limiting DC circuit breaker prolongs the breaking time of the fault to a certain extent. In order to solve the above problems, this paper proposes a multi-port DC circuit breaker based on dual-capacitor current limiting and energy sinking on the premise of decoupling the fault current attenuation and removal process and the fault line residual energy discharge process. Further reduce the fault breaking time and equipment withstand voltage requirements of the DC circuit breaker. Firstly, the topology and working principle of the proposed circuit breaker are analyzed, and then the parameters in the topology are designed. Then a simulation model is built in the PSCAD/EMTDC simulation platform to verify the fault breaking performance and breaking time. The effect of decoupling the fault current clearing process and the fault line residual energy discharge process on the effectiveness of shortening the fault breaking time is verified.
BibTeX
@inproceedings{gu2023multi,
  author = {Wei Gu and Xiansi Lou and Wenzhe Yin and Qihang Huang and Shiqiang Li and Jing Bian},
  title = {{Multi-port DC circuit breaker based on dual capacitor current limiting and energy sink}},
  booktitle = {Frontiers in Energy Research},
  year = {2023},
  doi = {10.3389/fenrg.2022.1010829},
}
Figure