Modified poly(vinylidene fluoride) polymer binder enables ultrathin sulfide solid electrolyte membrane for all-solid-state batteries

Rui Li, Yuqiong Mao, Ning Chen, Qingqing Liu, Jie Shao, Zhiqiang Liao, Kai Qiu, Pengbo Wang, Shuai Hao, Xuemei Liao, Hanli Wang, Yingzhu Wei, Chunli Guo, Xiang Liu, Gaolong Zhu, Dongsheng Ren, Languang Lu, Minggao Ouyang

Abstract

All-solid-state batteries (ASSBs) employing high-ionic-conductivity sulfide solid electrolytes (SEs) are the most promising next-generation batteries. Scalable fabrication of sulfide SE membranes is the priority for mass production of ASSBs. However, due to the poor chemical stability of sulfide SEs, the wet-slurry-based preparation of sulfide SE membranes is still hindered by limited choices of solvent-binder systems. Herein, we reported a modified poly(vinylidene fluoride) (M-PVDF) binder to achieve environment-friendly fabrication of sulfide SE membranes. Copolymerization is firstly performed on the widely-used PVDF binder to decrease crystallinity , which facilitate excellent solubility in the isobutyl isobutyrate-based slurry. Utilizing this efficient M-PVDF binder, the sulfide SE membrane achieves a high ionic conductivity of 2 mS cm −1 at 25 °C, an ultra-thin thickness of 26 μm, and good flexibility. The resulting ASSBs exhibit excellent rate performance with 53.51 % capacity utilization ratio at 5C. The ASSB also maintains high capacity retention rates of 96.9 % after 350 cycles under 0.5C at 25 °C and 87.8 % after 1000 cycles under 5C at 45 °C. This work can facilitate the non-toxic wet-slurry-based manufacturing of sulfide SE membrane, helping to promote the commercialization of ASSBs. • A modified PVDF binder is reported to achieve environment-friendly fabrication of sulfide SE membranes. • The M-PVDF binder exhibits outstanding solubility in the medium-polar solvent IBB, and strong adhesion with LPSCl SEs. • The LPSCl SE membrane exhibits an ultrathin thickness of 26 μm, a high ionic conductivity of 2 mS cm −1 . • The resulting ASSBs exhibit excellent rate performance and cycling stability.
BibTeX
@article{li2024modified,
  author = {Rui Li and Yuqiong Mao and Ning Chen and Qingqing Liu and Jie Shao and Zhiqiang Liao and Kai Qiu and Pengbo Wang and Shuai Hao and Xuemei Liao and Hanli Wang and Yingzhu Wei and Chunli Guo and Xiang Liu and Gaolong Zhu and Dongsheng Ren and Languang Lu and Minggao Ouyang},
  title = {{Modified poly(vinylidene fluoride) polymer binder enables ultrathin sulfide solid electrolyte membrane for all-solid-state batteries}},
  journal = {Journal of Energy Storage},
  year = {2024},
  doi = {10.1016/j.est.2024.114859},
}

Loading related content...

Figure