Modeling of the thermal properties of SARS-CoV-2 S-protein

Ziyuan Niu, Karin Hasegawa, Yuefan Deng, Ziji Zhang, Miriam Rafailovich, Marcia Simon, Peng ZhangFrontiers in Molecular Biosciences 2022 · DOI

TL;DR

This study uses extensive molecular dynamics simulations to model how the SARS-CoV-2 spike protein's structure and stability change across a wide range of temperatures (3°C to 95°C). The findings reveal a critical temperature around 60°C where the protein undergoes significant structural changes, correlating with the virus's observed infectivity and survival times at different temperatures.

What Problem Does This Paper Address?

Understanding how viruses, particularly SARS-CoV-2, behave under different environmental conditions is crucial for public health. While experimental data exists on the virus's survival and infectivity at various temperatures, a detailed atomic-level understanding of why these changes occur is often lacking. Specifically, the thermal stability and conformational dynamics of the SARS-CoV-2 spike (S) protein, a key player in viral entry, are not fully elucidated across a broad temperature spectrum. This gap makes it difficult to predict viral behavior in different climates or during transport and storage, and to design effective countermeasures. This paper aims to bridge this gap by providing a detailed, atomistic view of the S-protein's thermal properties using computational simulations.

Methods

The core of this research relies on all-atom molecular dynamics (MD) simulations. The authors simulated the SARS-CoV-2 S-protein across seven different temperatures (3°C, 20°C, 37°C, 60°C, 70°C, 80°C, and 95°C) for extended periods, reaching up to 3 microseconds (µs) per simulation. This "µs-scale" simulation length is significant, allowing for the capture of slower conformational dynamics.

Key analytical techniques employed include:

  • Root-Mean-Square Deviation (RMSD): To measure the overall structural stability of the protein over time.
  • Hydrogen Bond Analysis (P-W and M-M): To assess interactions between protein and water molecules, and within the protein itself, which are indicators of stability.
  • Solvent-Accessible Surface Area (SASA): To understand how the protein's exposure to the solvent changes with temperature.
  • Residue-Based Root-Mean-Square Fluctuation (RMSF): To identify specific regions or residues within the protein that become more or less flexible at different temperatures.
  • Structural Divergence Analysis: To pinpoint specific residues that undergo significant conformational changes between temperatures.
  • Free Energy Landscape (FEL): To visualize the protein's conformational space and identify stable and unstable states.
  • K-means Clustering: An unsupervised learning algorithm used to group temperatures based on their conformational properties and correlate these clusters with experimental data on viral survival times.
  • RBD Mass Deviation: To quantify the opening and closing of the Receptor-Binding Domain (RBD), a critical step for viral entry.

The data processing pipeline is visualized in Figure 1, illustrating the flow from raw simulation data to various levels of analysis.

Datasets

The primary dataset used is the protein structure of the SARS-CoV-2 S-protein, obtained from the Protein Data Bank (PDB ID: 6VXX). This is a standard approach for MD simulations of proteins. The study then generates its own "datasets" in the form of simulation trajectories and derived metrics (RMSD, H-bonds, SASA, etc.) at each tested temperature.

The study also extensively references and correlates its findings with published experimental data on SARS-CoV-2 survival times and infectivity at various temperatures (e.g., from Chin et al., 2020; Dai et al., 2020; Van Doremalen et al., 2020). These experimental results serve as a benchmark for validating the in silico findings.

Key Insights and Ideas

  • Critical Temperature Around 60°C: The simulations strongly suggest a critical temperature around 60°C where the S-protein undergoes a significant phase transition, moving from a stable to a more denatured state. This is a key finding that helps explain why the virus's viability changes so drastically in this temperature range.
  • 37°C: The "Sweet Spot" for Infectivity: The RBD shows maximum deviation at 37°C, indicating a more "open" conformation. This aligns with anecdotal observations that the virus is most infectious at human body temperature, likely due to optimal interaction with the ACE2 receptor.
  • Cold Stability and Long Survival: At 3°C, the S-protein remains highly stable, with low RMSD and high H-bond counts. This directly supports experimental findings of the virus surviving for extended periods in cold chain conditions.
  • Temperature-Dependent Structural Divergence: The study identifies specific "culprit" residues that become significantly more flexible or change conformation at higher temperatures, particularly between 60°C and 80°C, providing atomic-level insight into the denaturation process.
  • Clustering Validates Experimental Survival Times: The K-means clustering of simulation data successfully grouped temperatures into categories that closely match experimental observations of viral survival durations (weeks, days, minutes, seconds).

Key Results

  • Structural Stability at 3°C: The S-protein exhibits high stability at 3°C, with the lowest RMSD values and a stable RBD conformation, correlating with long viral survival times.
  • Increased Variation from 60°C to 80°C: Significant structural variations and increased RMSD are observed in this temperature range, pointing to a critical transition.
  • RBD Opening at 37°C: The RBD shows maximum deviation at 37°C, suggesting an open conformation conducive to ACE2 binding and infection.
  • Correlation with Survival Times: The clustering analysis successfully mapped simulation-derived temperature groups to experimental survival durations, ranging from weeks (3°C) to seconds (95°C).
  • Thermodynamic Shift: Entropy increases with temperature, while isochoric heat capacity decreases, indicating a shift towards unfolding at higher temperatures.

Limitations and Future Work

  • Computational Cost: All-atom MD simulations are computationally intensive, limiting the accessible timescales and the number of systems that can be studied. The authors mention that advances in multiscale modeling and AI-driven techniques could help overcome these limitations for longer-term studies.
  • Focus on S-Protein: While the S-protein is critical, the study focuses solely on its thermal properties. Future work could explore the thermal behavior of other viral components or the entire virion.
  • In Silico vs. In Vitro: While the study correlates well with experimental data, it is an in silico model. Experimental validation of specific atomic-level mechanisms identified in the simulations would strengthen the findings.
  • Specific Virus Strains: The study uses a specific PDB structure. Future research could investigate if different SARS-CoV-2 variants exhibit different thermal properties.

The authors suggest that their work provides a foundation for understanding the temperature-dependent behavior of SARS-CoV-2 and can complement sparse experimental data, especially concerning high-infectious virus cultivation.

Summary updated

Abstract

We calculate the thermal and conformational states of the spike glycoprotein (S-protein) of SARS-CoV-2 at seven temperatures ranging from 3°C to 95°C by all-atom molecular dynamics (MD) µs-scale simulations with the objectives to understand the structural variations on the temperatures and to determine the potential phase transition while trying to correlate such findings of the S-protein with the observed properties of the SARS-CoV2. Our simulations revealed the following thermal properties of the S-protein: 1) It is structurally stable at 3°C, agreeing with observations that the virus stays active for more than two weeks in the cold supply chain; 2) Its structure varies more significantly at temperature values of 60°C-80°C; 3) The sharpest structural variations occur near 60°C, signaling a plausible critical temperature nearby; 4) The maximum deviation of the receptor-binding domain at 37°C, corroborating the anecdotal observations that the virus is most infective at 37°C; 5) The in silico data agree with reported experiments of the SARS-CoV-2 survival times from weeks to seconds by our clustering approach analysis. Our MD simulations at µs scales demonstrated the S-protein's thermodynamics of the critical states at around 60°C, and the stable and denatured states for temperatures below and above this value, respectively.
BibTeX
@inproceedings{niu2022modeling,
  author = {Ziyuan Niu and Karin Hasegawa and Yuefan Deng and Ziji Zhang and Miriam Rafailovich and Marcia Simon and Peng Zhang},
  title = {{Modeling of the thermal properties of SARS-CoV-2 S-protein}},
  booktitle = {Frontiers in Molecular Biosciences},
  year = {2022},
  doi = {10.3389/fmolb.2022.953064},
}
Figure