Abstract
Obtaining accurate model information for robotic manipulators is a significant challenge in real-world applications. This article proposes a model-free trajectory tracking control scheme designed for robotic systems subject to input saturation. The proposed method ensures pre-defined tracking precision within a prescribed time, regardless of initial conditions. By utilizing Time-Delay Estimation (TDE) to account for lumped uncertainties and a novel smooth saturation function to handle control torque constraints, the system achieves global stability and high-precision performance. Simulation results on a planar two-link robotic manipulator validate the effectiveness of the developed control scheme.
The Challenge of Precise Robotic Control
In industrial and research settings, robotic manipulators often face complex dynamics, including friction, varying payloads, and external disturbances. Creating a perfect mathematical model to account for these factors is nearly impossible. While intelligent controllers like neural networks offer adaptability, they are often computationally intensive, making real-time implementation difficult.
Furthermore, many "prescribed-time" controllers—which guarantee a target is reached by a specific deadline—are limited by initial error constraints. If a robot starts too far from its target, these systems can fail. Additionally, physical motors have torque limits (input saturation). Standard "hard-clipping" of control signals can lead to "chatter" or instability, potentially damaging mechanical components.
Methodology
The researchers developed a three-pronged approach to address these modeling and physical constraints:
1. Time-Delay Estimation (TDE)
To achieve a "model-free" design, the controller employs TDE. Instead of relying on complex physical equations, the system uses the robot's state from a very recent time step to estimate the current "lumped uncertainty," which includes unknown dynamics and external disturbances. This allows the controller to remain computationally lightweight and suitable for high-frequency applications.
2. Practical Prescribed-time Function (PPTF)
A core innovation is the Practical Prescribed-time Function (PPTF). Unlike traditional methods, this performance boundary starts infinitely wide at $t=0$ and shrinks to a predefined, small steady-state region within a user-specified time $T$. Because the boundary is initially unconstrained, the controller ensures global stability, meaning the robot can start from any position and still meet its precision goals on time.
3. Smooth Saturation Handling
To manage motor torque limits without causing instability, the authors replaced standard hard saturation with a smooth, twice-differentiable approximation using a hyperbolic tangent function.
As shown in the figure above, the proposed function $\Pi(\tau, \vartheta)$ provides a smooth transition that avoids the sharp corners of a traditional hard clip $u(\tau)$. This differentiability is vital for maintaining smooth control signals and protecting mechanical hardware. Additionally, an auxiliary system monitors saturation states and compensates for them, preventing "wind-up" and ensuring the robot remains controllable even when operating at its physical limits.
Key Insights and Results
The effectiveness of the control scheme was demonstrated through simulations of a planar two-link robotic manipulator:
- Guaranteed Convergence: In all test scenarios, tracking errors converged within the target zone (e.g., 0.01 radians) precisely within the prescribed time (e.g., 2 seconds).
- Robustness to Disturbances: The system maintained high precision even when subjected to complex external forces, such as sine-wave disturbances.
- Saturation Recovery: The auxiliary system successfully managed scenarios where the robot started far from its target, requiring maximum torque. Without this system, simulations indicated the robot would lose control and diverge.
Conclusion and Future Directions
This research provides a robust, computationally efficient framework for high-precision robotic control without requiring detailed system models. By ensuring global stability and smooth handling of physical constraints, the method is well-suited for industrial manipulators.
Future work will focus on addressing the impact of high-frequency sensor noise on TDE and extending the control scheme to handle actuator faults, ensuring the robot can maintain performance even in the event of partial motor failure.
Summary updated