Mobile Power Network for Ultimate Mobility without Battery Life Anxiety

Mingqing Liu, Mingliang Xiong, Hao Deng, Qingwen Liu, Wang, Xinhe

Abstract

Similar to the evolution from the wired Internet to mobile Internet (MI), the growing demand for power delivery anywhere and anytime appeals for power grid transformation from the wired to the mobile domain. We propose the next generation of power delivery network—the Mobile Power Network (MPN)—for wireless power transfer within a mobile range from several meters to tens of meters. This paper outlines the MPN's conceptual evolution, its core supporting technology, Resonant Beam Charging (RBC), and the network architecture required to provide wide-area coverage. By cutting the final cord of mobile devices, MPN enables ultimate mobility and realizes "last-mile" mobile power delivery.

Introduction: The "Last-Mile" Power Bottleneck

The Internet of Things (IoT) is scaling to billions of devices, yet "continuity" remains a significant challenge. High-drain devices such as smartphones, VR/AR headsets, and drones cannot survive on ultra-low-power optimizations alone. Current Wireless Power Transfer (WPT) technologies are limited: near-field methods (inductive/magnetic resonance) offer high power but extremely short range, while far-field methods (RF/Laser) often struggle with safety regulations or require complex mechanical tracking to follow moving targets. The MPN aims to bridge this gap, providing high power, long range, and intrinsic safety.

Core Technology: Resonant Beam Charging (RBC)

The fundamental enabler of the MPN is Resonant Beam Charging (RBC), also referred to as Distributed Laser Charging (DLC). Unlike traditional laser systems that project a beam at a target, RBC creates an "intra-cavity" laser resonance.

The physics and features of Resonant Beam Charging (RBC), illustrating the resonant cavity, self-alignment, and intrinsic safety.

Self-Alignment and Safety

As shown in the figure above, the transmitter contains a gain medium and a retro-reflector, while the receiver (on the device) contains a second retro-reflector and a photovoltaic (PV) panel. Because retro-reflectors reflect light back exactly along its incident path, a resonant cavity forms automatically between the transmitter and receiver without the need for mechanical tracking.

Crucially, this system offers intrinsic safety. Because the laser beam is the resonant cavity, any obstruction (such as a human hand) immediately breaks the resonance. The beam shuts off at the speed of light, making it inherently safer than traditional high-power directed energy systems.

System Architecture: The Mobile Power Network (MPN)

To provide wide-area WPT coverage, the authors propose a structured network architecture that mirrors the design of cellular data networks.

The proposed Mobile Power Network (MPN) architecture, featuring backbone and access layers to support mobile user equipment.

As illustrated in the architecture diagram, the MPN consists of two primary layers:

  1. Access Layer: This layer comprises Wireless Power/Data Access Points (APs) that charge User Equipment (UE). These APs can support Simultaneous Lightwave Information and Power Transfer (SLIPT), delivering both energy and high-speed data via the same beam.
  2. Backbone Layer: This layer connects APs to the power grid and a centralized "Management Entity." This entity handles authentication, resource scheduling, and the handover logic required to maintain a power connection as a device moves from one AP's coverage area to another.

Key Insights and Experimental Results

The MPN paradigm shift is best understood through the analogy of the Mobile Internet. Just as we transitioned from fixed-line data to mobile data, the MPN transitions the power grid from a fixed infrastructure to a mobile service.

Experimental validations (referencing previous work in Ref [10]) have demonstrated the practical viability of this approach:

  • Power and Range: Systems have successfully delivered 3W of power over 2 meters within a 20° Field of View (FoV).
  • Safety Compliance: The system can deliver 1W over 5 meters while remaining within skin-safe laser regulation limits.
  • Efficiency: Within the beam path, over-the-air transmission efficiency is nearly 100%, as the resonant cavity minimizes energy loss to the environment compared to omnidirectional RF charging.

Challenges and Future Outlook

While the MPN offers a path toward battery-free mobility, several hurdles remain. The requirement for Line-of-Sight (LoS) means that while the auto-shutdown is a safety feature, it also represents a service interruption. Furthermore, scaling the system to manage massive scheduling for hundreds of devices in crowded environments (like airports) will require sophisticated algorithms, potentially utilizing information entropy to predict device behavior.

Engineering challenges also persist in shrinking the RBC receiver to fit into small wearables without sacrificing PV conversion efficiency. Despite these challenges, the MPN represents a vital step toward a world where mobile devices are truly cordless and "battery anxiety" is a thing of the past.

Summary updated

Abstract

Similar to the evolution from the wired Internet to mobile Internet (MI), the growing demand for power delivery anywhere and anytime appeals for power grid transformation from wired to mobile domain. We propose here the next generation of power delivery network -- mobile power network (MPN) for wireless power transfer within a mobile range from several meters to tens of meters. At first, we present the MPN's concept evolution and application scenarios. Then, we introduce the MPN's supporting technology, namely resonant beam charging (RBC). As a long-range wireless power transfer (WPT) method, RBC can safely deliver multi-Watt power to multiple devices concurrently. Meanwhile, the recent progress in RBC research has been summarized. Next, we specify the MPN's architecture to provide the wide-area WPT coverage. Finally, we discuss the MPN's features and challenges. MPN can enable the ultimate mobility by cutting the final cord of mobile devices, realizing the "last-mile" mobile power delivery.
BibTeX
@misc{liu2018mobile,
  author = {Mingqing Liu and Mingliang Xiong and Hao Deng and Qingwen Liu and Wang, Xinhe},
  title = {{Mobile Power Network for Ultimate Mobility without Battery Life Anxiety}},
  year = {2018},
  eprint = {1802.01570},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/1802.01570},
}
Figure