Miniaturizing Color-Sensitive Photodetectors via Hybrid Nanoantennas towards Sub micron Dimensions

Jinfa Ho, Zhaogang Dong, Hai Sheng Leong, Jun Zhang, Febiana Tjiptoharsono, Soroosh Daqiqeh Rezaei, Ken Choon Hwa Goh, Mengfei Wu, Shiqiang Li, Jing Yee Chee, Calvin Pei Yu Wong, Arseniy I. Kuznetsov, Joel K. W. YangarXiv 2022 · DOI · arXiv

TL;DR

Researchers have developed a hybrid silicon-aluminum nanoantenna that combines color filtering and light detection into a single, sub-micron structure. By eliminating the physical gap between traditional filters and photodiodes, this design achieves "zero-distance" sensing, paving the way for ultra-high-density CMOS image sensors that are immune to the optical cross-talk plaguing current digital cameras.

What Problem Does This Paper Address?

Standard digital camera sensors are essentially "color blind." To see in color, they use a "sandwich" approach: a layer of dye-based color filters (like the Bayer mask) sits on top of a layer of silicon photodiodes.

As we try to shrink pixels to increase resolution, this sandwich structure hits a physical wall. Because the filter and the sensor are separate elements, light hitting the sensor at an angle can pass through one color filter but land on a neighboring pixel—a phenomenon called optical cross-talk. This parallax effect creates "muddy" images and effectively limits how small a pixel can be (usually to a few micrometers). To go smaller, we need to merge the filter and the detector into one.

Methods

The team designed and fabricated arrays of hybrid Si-Al nanostructures. Each unit consists of a silicon nanopost topped with an aluminum (Al) disk, with an Al film surrounding the base of the posts.

  • Design & Simulation: They used Finite-Difference Time-Domain (FDTD) simulations to optimize the dimensions. By varying the diameter ($D$) of the silicon nanodisks (from 10 nm to 200 nm), they could tune which color of light the structure absorbs.
  • Fabrication: The structures were created using electron-beam lithography (EBL) and inductively coupled plasma (ICP) etching on $p$-type silicon wafers. A 30-nm thick aluminum layer was then evaporated onto the sample.
  • Dual Functionality: The aluminum serves two roles simultaneously:
  • Optical: It acts as a plasmonic resonator that enhances light absorption in the silicon.
  • Electrical: The interface between the Al and the $p$-Si forms a Schottky barrier, which creates an internal electric field to separate the generated electron-hole pairs for detection.

Datasets

As an experimental physics and photonics paper, this work does not use standard machine learning datasets. Instead, the "data" consists of:

  • FDTD Simulation Results: Used to model absorption spectra and multipolar decompositions.
  • Experimental Measurements: I-V (current-voltage) characterization and photocurrent mapping across 32 different nanodisk arrays.
  • Microscopy: Scanning Electron Microscope (SEM) images to verify the precision of the fabricated sub-micron structures.

Key Insights and Ideas

  • The Hybrid Resonance "Aha" Moment: The researchers found that the color selectivity isn't just from the silicon or the metal alone. It’s a hybrid Mie-plasmon resonance. Specifically, the electric dipole in the aluminum disk enhances the magnetic dipole (MD) resonance within the silicon nanopost. This MD resonance confines the light strongly inside the silicon, maximizing the chance of generating a signal.
  • Zero-Distance Sensing: By making the "filter" part of the "detector," the distance between the two is effectively zero. This eliminates the parallax issues that cause cross-talk in traditional sensors.
  • Built-in Micro-lenses: The nanoantennas act like tiny lenses. Experimental results showed that the photocurrent remained stable even when light hit the sensor at angles up to 30°, suggesting these pixels are much better at capturing light from wide-angle lenses than traditional designs.

Key Results

  • Extreme Miniaturization: The team successfully demonstrated functional color-sensitive pixels as small as 1×1 μm².
  • Performance: They achieved a measured responsivity of 47.2 mA/W (equivalent to an external quantum efficiency of ~9%) at a 532 nm wavelength.
  • Signal-to-Noise: Under illumination, the photocurrent was ~800-fold higher than the dark current.
  • Tunability: By simply changing the diameter of the nanodisks, they produced clear, distinct peaks for Red, Green, and Blue light, matching their theoretical simulations.

Limitations and Future Work

While a major proof-of-concept, there are hurdles before this reaches your smartphone:

  • Efficiency: An external quantum efficiency (EQE) of 9% is significantly lower than commercial CMOS sensors, which often exceed 50-80%. Improving the collection efficiency and reducing surface recombination will be critical.
  • Dark Current: The dark current (~52 nA at 0.5 V) is relatively high for high-end imaging applications, which might limit performance in low-light conditions.
  • Broadening the Spectrum: The authors suggest that by using asymmetric shapes (like ellipses), they could add polarization sensitivity. They also aim to explore "interband plasmonics" to extend this technology into the ultraviolet (UV) range.

Reference: Ho, J., Dong, Z., et al. "Miniaturizing Color-Sensitive Photodetectors via Hybrid Nanoantennas towards Sub-micron Dimensions." (2024).

Summary updated

Abstract

Digital camera sensors utilize color filters on photodiodes to achieve color selectivity. As color filters and photosensitive silicon layers are separate elements, these sensors suffer from optical cross-talk, which sets limits to the minimum pixel size. In this paper, we report hybrid silicon-aluminum nanostructures in the extreme limit of zero distance between color filters and sensors. This design could essentially achieve sub micron pixel dimensions and minimize the optical cross-talk originated from tilt illuminations. The designed hybrid silicon-aluminum nanostructure has dual functionalities. Crucially, it supports a hybrid Mie-plasmon resonance of magnetic dipole to achieve the color-selective light absorption, generating electron hole pairs. Simultaneously, the silicon-aluminum interface forms a Schottky barrier for charge separation and photodetection. This design could potentially replace the traditional dye based filters for camera sensors at ultra-high pixel densities with advanced functionalities in sensing polarization and directionality, as well as UV selectivity via interband plasmons of silicon.
BibTeX
@misc{ho2022miniaturizing,
  author = {Jinfa Ho and Zhaogang Dong and Hai Sheng Leong and Jun Zhang and Febiana Tjiptoharsono and Soroosh Daqiqeh Rezaei and Ken Choon Hwa Goh and Mengfei Wu and Shiqiang Li and Jing Yee Chee and Calvin Pei Yu Wong and Arseniy I. Kuznetsov and Joel K. W. Yang},
  title = {{Miniaturizing Color-Sensitive Photodetectors via Hybrid Nanoantennas towards Sub micron Dimensions}},
  year = {2022},
  eprint = {2206.03167},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2206.03167},
}

Loading related content...

Figure