MIMO Transmit Beampattern Matching Under Waveform Constraints

Ziping Zhao, Daniel P. Palomar

TL;DR

This paper tackles the complex problem of designing waveforms for MIMO radar systems to achieve a desired spatial coverage while minimizing signal interference. They introduce an efficient one-step optimization method based on Majorization-Minimization (MM) to handle the inherent non-convexity of the problem, demonstrating improved performance over existing techniques.

What Problem Does This Paper Address?

Modern MIMO radar systems offer significant advantages over traditional phased-array radars, such as improved spatial resolution and target detection. A key challenge in realizing these benefits is the "MIMO transmit beampattern matching problem." This involves designing the probing waveforms transmitted by each antenna to achieve a specific energy distribution in space and frequency (the desired beampattern) while simultaneously minimizing the correlation between signals reflected back from different targets. This minimization is crucial for distinguishing targets and improving parameter identifiability.

The difficulty arises from the problem's formulation: the objective function is non-convex (specifically, fourth-order), and practical waveform constraints (like constant modulus or peak-to-average ratio) are often non-convex themselves. This makes finding an optimal solution computationally challenging. Previous approaches often involved multi-step methods or were limited to specific constraints, potentially leading to suboptimal performance or inefficiency when multiple constraints were considered.

Methods

The core contribution of this paper is a novel one-step Majorization-Minimization (MM) based algorithm for solving the MIMO transmit beampattern matching problem. The MM method is a powerful technique for tackling non-convex optimization problems by iteratively solving a sequence of simpler, convex subproblems.

Here's a breakdown of their approach:

  • Problem Formulation: They formulate the problem as a single optimization objective that simultaneously aims to match a desired beampattern and minimize the cross-correlation between probing signals, subject to various practical waveform constraints (energy, constant modulus, PAR, similarity).
  • Majorization-Minimization (MM): The paper leverages the MM framework. The key idea is to replace the complex, non-convex objective function with a simpler "surrogate" function that "majorizes" (i.e., is always greater than or equal to) the original function. By minimizing this surrogate function, they iteratively approach the true minimum of the original problem.
  • Majorization Steps: The authors detail specific majorization steps for both the beampattern matching term ($J(\alpha, x)$) and the sidelobe term ($E(x)$). This involves constructing quadratic or linear majorizing functions that are easier to optimize. They introduce useful lemmas and properties to facilitate these majorization steps and simplify computations, particularly for Hermitian Toeplitz matrices.
  • Closed-Form Solutions: A significant advantage of their MM approach is that the subproblem at each iteration can be solved in closed-form for various waveform constraints. This is achieved through a final linear majorizing function, and Lemma 3 provides these closed-form solutions for different constraint sets (fixed energy, constant modulus, PAR, similarity).

Datasets

Not discussed in the paper. The evaluation is performed using numerical simulations with synthetically generated parameters.

Key Insights and Ideas

  • Unified One-Step Approach: The paper successfully unifies the beampattern matching and cross-correlation minimization objectives into a single optimization problem, solvable with a one-step MM algorithm. This contrasts with some prior multi-step methods.
  • MM for Non-Convexity: The MM method proves to be highly effective in handling the inherent non-convexity of the MIMO beampattern matching problem, leading to efficient and convergent algorithms.
  • Flexibility with Constraints: The proposed framework is shown to be adaptable to various practical waveform constraints, a significant advantage for real-world radar system design.
  • Closed-Form Updates: The ability to derive closed-form solutions for the subproblems at each MM iteration is a key enabler of the algorithm's efficiency and speed.

Key Results

  • Monotonic Convergence: The proposed MM-based algorithm demonstrates monotonic convergence of the objective function value.
  • Faster Convergence: Numerical simulations show that the MM-based algorithm converges within approximately 20 iterations, which is faster than the benchmark ADMM-based algorithm presented in [13].
  • Improved Matching Performance: The proposed algorithm achieves a tighter matching performance to the desired beampattern and results in a lower Mean-Squared Error (MSE) compared to the benchmark algorithm. For the specific 3-target scenario tested, the proposed algorithm achieved an MSE of 24.6264, slightly better than the ADMM-based algorithm's MSE of 24.8211.

Limitations and Future Work

  • Computational Complexity: While the algorithm is efficient, the paper doesn't deeply analyze the computational complexity in terms of big-O notation for all constraint types.
  • Generalization to More Complex Scenarios: The paper focuses on a colocated MIMO radar with a Uniform Linear Array (ULA). Future work could explore extensions to distributed MIMO systems or different array geometries.
  • Hardware Implementation: While waveform constraints like constant modulus are motivated by hardware limitations, the paper focuses on the theoretical optimization. Further research could bridge the gap to practical hardware implementation challenges.
  • Adaptive Scenarios: The current formulation assumes a known desired beampattern. Extending this to adaptive beampattern design based on real-time target information would be a valuable future direction.

Summary updated

Abstract

In this paper, the multiple-input multiple-output (MIMO) transmit beampattern matching problem is considered. The problem is formulated to approximate a desired transmit beampattern (i.e., an energy distribution in space and frequency) and to minimize the cross-correlation of signals reflected back to the array by considering different practical waveform constraints at the same time. Due to the nonconvexity of the objective function and the waveform constraints, the optimization problem is highly nonconvex. An efficient one-step method is proposed to solve this problem based on the majorization-minimization (MM) method. The performance of the proposed algorithms compared to the state-of-art algorithms is shown through numerical simulations.
BibTeX
@inproceedings{zhao2018mimo,
  author = {Ziping Zhao and Daniel P. Palomar},
  title = {{MIMO Transmit Beampattern Matching Under Waveform Constraints}},
  booktitle = {IEEE International Conference on Acoustics, Speech and Signal Processing},
  year = {2018},
  doi = {10.1109/icassp.2018.8462047},
}
Figure