MIMO-NOMA Networks Relying on Reconfigurable Intelligent Surface: A Signal Cancellation-Based Design

Tianwei Hou, Yuanwei Liu, Zhengyu Song, Xin Sun, Yue Chen

Abstract

This paper introduces a novel Signal Cancellation Based (SCB) design for MIMO-NOMA networks assisted by Reconfigurable Intelligent Surfaces (RIS). By leveraging RIS to actively cancel inter-cluster interference rather than solely boosting desired signals, the proposed design bypasses traditional hardware constraints on antenna counts while significantly improving network reliability and data rates. Analytical derivations for outage probability and ergodic rate are validated through extensive simulations, demonstrating the superiority of the SCB approach over legacy designs.

Introduction

The transition to 6G wireless networks requires innovative solutions for spectral efficiency and massive connectivity. MIMO-NOMA (Multiple-Input Multiple-Output Non-Orthogonal Multiple Access) is a leading candidate for these requirements, but it faces significant challenges from inter-cluster interference. Traditionally, Zero-Forcing (ZF) techniques have been used to nullify this interference, but they impose a "hardware tax," typically requiring the number of receiving antennas (RAs) to exceed the number of transmitting antennas (TAs). This paper proposes using Reconfigurable Intelligent Surfaces (RIS) to perform "Signal Cancellation," effectively using the environment to manage interference and freeing user devices from excessive antenna requirements.

System Model

The system considers a Base Station (BS) equipped with $M$ antennas serving multiple user clusters through a combination of direct and RIS-reflected links. Each cluster contains $K$ users. The RIS consists of $N$ passive reflecting elements that can be programmed to alter the phase of incident signals.

System architecture of the RIS-aided MIMO-NOMA network, illustrating the direct and reflected links between the BS, RIS, and user clusters.

The mathematical framework and key parameters used throughout the study are summarized in the following table:

Table of key notations and system parameters, including channel matrices and fading factors.

The study evaluates two physical scenarios: diffuse scattering (typical for sub-6G networks where the RIS acts as a rough surface) and anomalous reflection (typical for mmWave where the RIS acts as a precise mirror). Channels are modeled using Rayleigh fading for direct links and Rician fading for RIS-assisted links.

Signal Cancellation Based (SCB) Design

The core innovation is the SCB design, which shifts the role of the RIS from simple signal boosting to active interference cancellation. The RIS is programmed to reflect a signal that is the "mathematical opposite" of the inter-cluster interference. When these signals combine at the user's receiver, the interference is neutralized, leaving a clean channel for the desired signal.

Key methodological aspects include:

  • Passive Beamforming Weight Design: Derivation of a specific matrix ($\Phi$) for RIS elements to ensure interference residue is minimized or eliminated.
  • Hardware Efficiency: Unlike traditional Zero-Forcing, the SCB design allows the system to function effectively even when users have only a single antenna ($L \ge 1$), provided the RIS has enough elements ($N$).
  • Finite Resolution Analysis: Recognizing real-world hardware limitations, performance is evaluated under practical constraints where RIS phase shifts are discrete (e.g., 3-bit or 6-bit resolution) rather than continuous.

Performance Analysis and Results

The authors derived closed-form expressions for Outage Probability (OP) and Ergodic Rate (ER) to predict network reliability and throughput. Monte Carlo simulations validated these derivations, leading to several key insights:

  • Inter-cluster Interference Elimination: The SCB design successfully removes the primary bottleneck in NOMA systems, which is the interference between different user groups.
  • Diversity Order: The analytical results confirmed that the system's diversity order is equal to the number of receiving antennas ($L$).
  • Superiority over Legacy Designs: The RIS-SCB design consistently outperformed both classic Zero-Forcing and Signal-Alignment (SA) based designs in terms of outage probability.
  • The 6-Bit Sweet Spot: Simulations indicate that a 6-bit phase resolution is practically indistinguishable from the ideal continuous-phase case, providing a clear target for hardware manufacturers.
  • NOMA vs. OMA: The RIS-aided NOMA network achieved lower outage probabilities and higher ergodic rates compared to its Orthogonal Multiple Access (OMA/TDMA) counterparts.

Conclusion

The Signal Cancellation Based design for RIS-aided MIMO-NOMA networks offers a robust solution to inter-cluster interference without requiring excessive hardware at the user end. By transforming the wireless environment into a controllable component of the network, this approach paves the way for more efficient and reliable 6G deployments. Future research directions include the joint optimization of active and passive beamforming and enhancing system robustness against imperfect channel state information.

Summary updated

Abstract

Reconfigurable intelligent surface (RIS) technique stands as a promising signal enhancement or signal cancellation technique for next generation networks. We design a novel passive beamforming weight at RISs in a multiple-input multiple-output (MIMO) non-orthogonal multiple access (NOMA) network for simultaneously serving paired users, where a signal cancellation based (SCB) design is employed. In order to implement the proposed SCB design, we first evaluate the minimal required number of RISs in both the diffuse scattering and anomalous reflector scenarios. Then, new channel statistics are derived for characterizing the effective channel gains. In order to evaluate the network's performance, we derive the closed-form expressions both for the outage probability (OP) and for the ergodic rate (ER). The diversity orders as well as the high-signal-to-noise (SNR) slopes are derived for engineering insights. The network's performance of a finite resolution design has been evaluated. Our analytical results demonstrate that: i) the inter-cluster interference can be eliminated with the aid of large number of RIS elements; ii) the line-of-sight of the BS-RIS and RIS-user links are required for the diffuse scattering scenario, whereas the LoS links are not compulsory for the anomalous reflector scenario.
BibTeX
@article{hou2020mimo,
  author = {Tianwei Hou and Yuanwei Liu and Zhengyu Song and Xin Sun and Yue Chen},
  title = {{MIMO-NOMA Networks Relying on Reconfigurable Intelligent Surface: A Signal Cancellation-Based Design}},
  journal = {IEEE Trans. Communications},
  year = {2020},
  doi = {10.1109/tcomm.2020.3018179},
}
Figure