Abstract
Haze pollution is a severe environmental problem, caused by elevation of fine particles ($PM_{2.5}$), which is related to secondary aerosol formation, unfavourable synoptic conditions, regional transport, etc. The regional haze formation in basin areas, along with intensive emission of precursors, high relative humidity and poor dispersion conditions, is still limitedly understood. In this study, a field campaign was conducted to investigate the factors resulting in haze formation in Sichuan Basin (SCB) during winter in 2021. The fine aerosol chemical composition was characterised by using a time-of-flight aerosol chemical speciation monitor (ToF-ACSM). The average concentration of non-refractory fine particles ($NR-PM_{2.5}$) was $98.5 \pm 38.7 \mu g/m^3$. Three factors, including a hydrocarbon-like OA (HOA), a biomass burning OA (BBOA), and an oxygenated OA (OOA), were identified. Nitrate formation was promoted by gas-phase and aqueous-phase oxidation, while sulphate was mainly formed through aqueous-phase. This study revealed the factors driving severe haze formation in SCB, and implied the benefit of controlling nitrate as well as intense biomass burning and vehicle exhaust emission to the mitigation of heavy aerosol pollution in this region.
Introduction
The Sichuan Basin (SCB) is one of China’s most densely populated regions, characterized by a unique "bowl-like" topography that frequently traps air pollutants. Unlike the extensively studied North China Plain, the SCB experiences persistently high relative humidity, low wind speeds, and stagnant air conditions. While national efforts have successfully reduced sulfur dioxide ($SO_2$) emissions over the last decade, nitrogen oxides ($NO_x$) and organic emissions from biomass burning—such as wood-fired heating and cooking—remain significant. This report investigates the specific chemical pathways, particularly the formation of organic aerosols and nitrates, that lead to severe winter haze episodes in this unique geographical setting.
Methods and Data
A month-long field campaign was conducted during the winter of 2021 (December 18, 2021, to January 22, 2022) at a suburban site in Deyang, near Chengdu. The primary analytical tool was a Time-of-Flight Aerosol Chemical Speciation Monitor (ToF-ACSM), providing real-time measurements of non-refractory $PM_{2.5}$ components, including organics, nitrate, sulfate, ammonium, and chloride.
The researchers employed several analytical techniques:
- Positive Matrix Factorization (PMF): Used to categorize organic aerosols (OA) into three sources: Hydrocarbon-like OA (HOA, primarily from vehicle emissions), Biomass Burning OA (BBOA), and Oxygenated OA (OOA, representing secondary aerosols).
- HYSPLIT Trajectory Modeling: To track the regional origin of air masses.
- ISORROPIA-II Thermodynamic Model: Used to estimate Aerosol Liquid Water Content (ALWC), a critical parameter for understanding aqueous-phase chemistry.
Key Insights and Results
The study identified several critical drivers of haze in the SCB:
1. The Dominance of Nitrate Nitrate ($NO_3^-$) contributed approximately 28.8% of the total particle mass, significantly exceeding sulfate levels. This shift indicates that as $SO_2$ levels have declined, $NO_x$ from vehicles and industrial sources has become the primary inorganic driver of haze.
2. The Dual Role of Fog Fog events were found to have a complex impact on aerosol composition. While fog droplets effectively scavenged primary particles like soot and fresh biomass smoke, they simultaneously acted as aqueous reactors. These conditions accelerated the formation of secondary nitrate and oxygenated organic aerosols (OOA), leading to an increase in the Oxygen-to-Carbon (O:C) ratio and indicating a more "chemically aged" aerosol population.
3. Characterization of Haze Episodes The researchers identified three distinct types of haze episodes during the campaign:
- Photochemical-driven: Dominated by sunlight-induced secondary formation.
- Primary-driven: Caused by direct emissions from biomass burning and vehicle exhaust.
- Mixed-mode: A combination of direct emissions and rapid chemical formation.
4. Topographic and Meteorological Influence Pollution levels were found to be highest when air masses originated from the northeast and east, subsequently stagnating within the basin. The average $NR-PM_{2.5}$ concentration was $98.5 \pm 38.7 \mu g/m^3$, with organic aerosols (40.3%) and nitrate (28.8%) being the major constituents.
Conclusion
The findings suggest that for the Sichuan Basin to achieve significant improvements in air quality, policy interventions must shift focus. While $SO_2$ reduction has been successful, a more aggressive and targeted approach to reducing $NO_x$ and primary biomass burning emissions is required. Future research should aim to characterize the specific volatile organic compound (VOC) precursors that lead to OOA formation in the region to further refine mitigation strategies.
Summary updated