Measurement of the absolute Raman cross section of the optical phonons in type Ia natural diamond

R. L. Aggarwal, L. W. Farrar, Semion K. Saikin, Xavier Andrade, Alán Aspuru‐Guzik, D.l. PollaSolid 2011 · DOI

TL;DR

This paper presents the first direct measurement of the absolute Raman cross section for the fundamental optical phonon mode in type Ia natural diamond using two different laser wavelengths. The findings offer crucial experimental data that can help refine theoretical models of diamond's optical properties and have implications for its use in advanced optical and electronic applications.

What Problem Does This Paper Address?

Raman spectroscopy is a powerful tool for probing the vibrational properties of materials, and diamond's unique characteristics make it a material of significant interest. The 1332 cm⁻¹ optical phonon mode in diamond is particularly important, but accurately quantifying its Raman scattering intensity – specifically, the absolute Raman cross section – has been challenging. Previous measurements often relied on relative comparisons or were performed on different types of diamond (e.g., Type IIa, which is purer). This paper aims to fill this gap by providing precise, absolute measurements for type Ia diamond, which is the most common natural type and contains nitrogen impurities that can influence its properties. Understanding these cross sections is vital for accurate quantitative analysis using Raman spectroscopy and for developing theoretical models that accurately predict diamond's behavior under various excitation conditions.

Methods

The researchers employed a carefully designed experimental setup to measure the absolute Raman cross section. Key aspects include:

  • Laser Excitation: Two distinct laser wavelengths were used: 785 nm (near-infrared) and 1064 nm (infrared). This allows for the investigation of how the Raman cross section changes with excitation energy.
  • Signal Calibration: A crucial element was the use of a temperature-controlled blackbody source for calibrating the Raman spectrometer's signal. This provides an absolute reference, unlike methods relying on relative intensities to known standards.
  • Sample: A 0.9-mm thick, plane-parallel type Ia natural diamond sample with a (111) crystallographic orientation was used.
  • Spectrometer Setup: A backscattering geometry was employed, with a schematic of the optical setup detailed in Figure 1. This involved a focusing lens, a beamsplitter, and a Raman spectrometer equipped with specific gratings and filters for each wavelength.
  • Theoretical Calculations: Time-dependent density functional theory (TDDFT) within the local density approximation (LDA) was used to compute the excitation energy-dependent Raman cross section and polarizability. This theoretical approach provides a valuable comparison to the experimental results.

Datasets

Not discussed in the paper. The primary data comes from the experimental measurements on a specific diamond sample and theoretical computations.

Key Insights and Ideas

  • Absolute Cross Section Measurement: The paper provides the first direct measurement of the absolute Raman cross section for type Ia diamond at 785 nm and 1064 nm. This is a significant experimental contribution.
  • Excitation Wavelength Dependence: The measured Raman cross sections and polarizabilities show a dependence on the excitation wavelength, which is important for understanding light-matter interactions in diamond.
  • Comparison with Theory: The experimental results are compared with TDDFT calculations. While generally in agreement, there are some discrepancies, particularly for the measured polarizability values being slightly larger than computed ones for type Ia diamond.
  • Defect Influence: The study investigates the potential influence of nitrogen impurities (IaA and IaB defects) on the Raman polarizability. Theoretical calculations suggest these defects cause a change of less than 5%, implying that other factors might contribute to the observed differences between type Ia and type IIa diamonds.
  • Polarizability Trend: The measured Raman polarizability |d| is observed to be larger for the longer wavelength (1064 nm) excitation compared to the shorter wavelength (785 nm) in this work. This is noted as being inconsistent with the expected dispersion, though the authors suggest the values might be considered similar within error bars.

Key Results

  • Raman Cross Section (σRS):
    • For 785 nm excitation: 2.7 ± 0.6 × 10⁻²⁹ cm² per carbon atom.
  • For 1064 nm excitation: 0.95 ± 0.2 × 10⁻²⁹ cm² per carbon atom.
  • Raman Scattering Efficiency (S):
    • For 785 nm excitation: 3.8 ± 0.8 × 10⁻⁷ cm⁻¹ sr⁻¹.
  • For 1064 nm excitation: 1.3 ± 0.3 × 10⁻⁷ cm⁻¹ sr⁻¹.
  • Raman Polarizability (|d|):
    • For 785 nm excitation: 6.8 ± 0.7 × 10⁻¹⁶ cm².
  • For 1064 nm excitation: 8.1 ± 0.8 × 10⁻¹⁶ cm².
  • These measured |d| values are larger than previously reported values for type IIa diamond (e.g., 4.4–4.6 × 10⁻¹⁶ cm²).
  • Computed |d| values from TDDFT are also presented, showing reasonable agreement but with some differences, particularly for the static limit and specific excitation energies.

Limitations and Future Work

  • Discrepancy in Polarizability Dispersion: The authors note that their measured |d| values are higher than computed values for 785 nm and 1064 nm excitation, and also higher than previous measurements on type IIa diamond. They also observe that the measured |d| is higher for 1064 nm than 785 nm, which is contrary to the expected dispersion. While they suggest the values might be similar within error bars, this warrants further investigation.
  • Defect Influence: While theoretical calculations suggest a minor direct impact of IaA and IaB defects on Raman polarizability (<5%), the observed differences between type Ia and type IIa diamonds might still be influenced by these impurities in ways not fully captured by the current theoretical model.
  • Future Work: The paper implicitly suggests that further theoretical refinement, potentially beyond LDA, or experimental studies on a wider range of diamond types and excitation wavelengths could help resolve the observed discrepancies and provide a more complete understanding of Raman scattering in diamond. Investigating the precise role of nitrogen impurities and their aggregation states in influencing Raman cross sections remains an area for future exploration.

Summary updated

BibTeX
@inproceedings{aggarwal2011measurement,
  author = {R. L. Aggarwal and L. W. Farrar and Semion K. Saikin and Xavier Andrade and Alán Aspuru‐Guzik and D.L. Polla},
  title = {{Measurement of the absolute Raman cross section of the optical phonons in type Ia natural diamond}},
  booktitle = {Solid},
  year = {2011},
  doi = {10.1016/j.ssc.2011.11.005},
}
Figure