Lightweight holographic near-eye display system with self-charging capability using solar energy

Changyu Wang, Yueshu Xu, Hong Xu, Juan Liu

Abstract

Near-eye display plays an important role in emerging spatial computing systems, providing a distinctive visual effect of virtual-real fusion. However, its application for all-day wear is greatly limited by the bulky structure, energy expenditure, and continuous battery heating. Here, we propose a lightweight holographic near-eye display system that takes advantage of solar energy for self-charging. To achieve the collection of solar energy and near-eye display without crosstalk, holographic optical elements (HOE) are used to diffract sunlight and signal light into a common waveguide. Then, small-area solar cells convert the collected solar energy and power the system. Compact power supply components replace heavy batteries, contributing to the lightweight design. The simple acquisition of solar energy provides the system with sustainable self-charging capability. We believe that the lightweight design and continuous energy input solution will significantly promote the popularity of near-eye display in our daily lives.

Introduction

The development of near-eye display (NED) systems is a cornerstone of spatial computing, enabling the seamless fusion of virtual and real-world environments. However, widespread adoption for all-day use is hampered by a significant design trade-off: the "weight vs. endurance" dilemma. Current AR headsets are often bulky, have limited battery life, and suffer from thermal issues due to battery heating. In many devices, the battery alone accounts for more than half of the total weight. This research addresses these challenges by introducing a lightweight holographic NED system capable of harvesting solar energy for continuous self-charging.

System Architecture and Methodology

The proposed system utilizes a multi-functional optical combiner that integrates a glass waveguide with specialized Holographic Optical Elements (HOEs). This architecture allows the system to simultaneously perform image display and solar energy collection without crosstalk.

Schematic of the self-charging holographic near-eye display system, illustrating the solar capture mechanism (b), the self-charging loop (c), and the display path (d).

The optical combiner consists of three primary elements:

  1. HOE-1 (Solar Capture): Positioned on the outer surface, it diffracts incident sunlight into the waveguide at angles that facilitate Total Internal Reflection (TIR) along the vertical axis, guiding light toward edge-mounted solar cells.
  2. HOE-2 & HOE-3 (Display): These elements manage the signal light from a micro-projector. HOE-2 couples the light into the waveguide, while HOE-3 couples it out toward the user's eye.

To optimize efficiency, the researchers implemented a partitioning strategy for HOE-1. By dividing the element into four distinct areas with specific TIR angles, they minimized "secondary diffraction"—a phenomenon where trapped light prematurely leaks out of the waveguide. Furthermore, the design exploits the angular and wavelength selectivity of volume holograms to ensure that solar collection and image display operate on independent optical paths.

Physical prototype of the waveguide assembly, highlighting the spatial arrangement of the display coupling elements (HOE-2, HOE-3) and the solar capture element (HOE-1).

Key Results and Performance

The prototype demonstrated high performance across several metrics:

  • Efficiency: Solar collection efficiency exceeded 60% for primary RGB wavelengths (457nm, 532nm, and 639nm).
  • Angular Range: The system maintains effective energy collection over a wide field of view (106° × 60°), making it robust to head movements.
  • Power Generation: Under direct sunlight, the system's output voltage increased from 0.63V to 3.94V.
  • Charging Capability: The system successfully charged a 205mAh battery in 30 minutes, providing a sustainable power source for low-power wearable electronics.
  • Optical Quality: Experimental results showed that the integration of solar harvesting elements had a negligible impact on environmental transparency and AR display quality.

Conclusion and Future Outlook

This work presents a viable path toward truly lightweight, all-day wearable AR glasses by transforming the display waveguide into a solar concentrator. By replacing heavy batteries with compact solar cells, the design significantly reduces weight and heat. Future improvements will focus on increasing power supply efficiency, potentially by harvesting unused signal light from the projector. Additionally, the integration of high-efficiency perovskite solar cells and more seamless frame designs will further enhance the system's portability and performance.

Summary updated

Abstract

Near-eye display plays an important role in emerging spatial computing systems, providing a distinctive visual effect of virtual-real fusion. However, its application for all-day wear is greatly limited by the bulky structure, energy expenditure, and continuous battery heating. Here, we propose a lightweight holographic near-eye display system that takes advantage of solar energy for self-charging. To achieve the collection of solar energy and near-eye display without crosstalk, holographic optical elements (HOE) are used to diffract sunlight and signal light into a common waveguide. Then, small-area solar cells convert the collected solar energy and power the system. Compact power supply components replace heavy batteries, contributing to the lightweight design. The simple acquisition of solar energy provides the system with sustainable self-charging capability. We believe that the lightweight design and continuous energy input solution will significantly promote the popularity of near-eye display in our daily lives.
BibTeX
@inproceedings{wang2025lightweight,
  author = {Changyu Wang and Yueshu Xu and Hong Xu and Juan Liu},
  title = {{Lightweight holographic near-eye display system with self-charging capability using solar energy}},
  booktitle = {Photonics},
  year = {2025},
  doi = {10.1364/prj.554523},
}
Figure