Abstract
Rapid synthesis of high-entropy alloy nanoparticles (HEA NPs) offers new opportunities to develop functional materials in widespread applications. Although some methods have successfully produced HEA NPs, these methods generally require rigorous conditions such as high pressure, high temperature, restricted atmosphere, and limited substrates, which impede practical viability. In this work, we report laser solid-phase synthesis of CrMnFeCoNi nanoparticles by laser irradiation of mixed metal precursors on a laser-induced graphene (LIG) support with a 3D porous structure. The CrMnFeCoNi nanoparticles are embraced by several graphene layers, forming graphene shell-encapsulated HEA nanoparticles. The mechanisms of the laser solid-phase synthesis of HEA NPs on LIG supports are investigated through theoretical simulation and experimental observations, in consideration of mixed metal precursor adsorption, thermal decomposition, reduction through electrons from laser-induced thermionic emission, and liquid beads splitting. The production rate reaches up to 30 g/h under the current laser setup. The laser-synthesized graphene shell-encapsulated CrMnFeCoNi NPs loaded on LIG-coated carbon paper are used directly as 3D binder-free integrated electrodes and exhibited excellent electrocatalytic activity towards oxygen evolution reaction with an overpotential of 293 mV at the current density of 10 mA/cm<sup>2</sup> and exceptional stability over 428 h in alkaline media, outperforming the commercial RuO<sub>2</sub> catalyst and the relevant catalysts reported by other methods. This work also demonstrates the versatility of this technique through the successful synthesis of CrMnFeCoNi oxide, sulfide, and phosphide nanoparticles.
Introduction
High-entropy alloys (HEAs), composed of five or more elements in near-equimolar ratios, have emerged as exceptional candidates for electrocatalysis due to their unique lattice distortions and synergistic effects. However, synthesizing HEA nanoparticles (NPs) is challenging; traditional wet chemistry often leads to phase separation because different metal precursors reduce at different rates. Existing rapid heating methods often require specialized substrates or rigorous atmospheric controls. This work introduces a scalable, rapid, and controllable laser solid-phase synthesis method that overcomes these limitations.
Synthesis and Characterization
The synthesis utilizes 3D porous laser-induced graphene (LIG) as a host material. Mixed metal chloride precursors (Cr, Mn, Fe, Co, and Ni) are adsorbed onto the LIG, which is then irradiated with a nanosecond Nd:YAG laser. This process results in the formation of uniform HEA nanoparticles (~15 nm) encapsulated within protective graphene shells.
Characterization via TEM and XRD confirms the formation of a face-centered cubic (FCC) structure. The graphene shell is a critical feature, preventing nanoparticle aggregation and providing corrosion resistance while remaining thin enough to allow catalytic activity at the metal sites.
Proposed Mechanisms
The rapid formation of HEA NPs is driven by a combination of photothermal and electronic effects. Theoretical simulations and experimental data suggest three primary mechanisms acting in concert:
- Photothermal Decomposition: The laser rapidly heats the LIG, decomposing the metal salts into metallic elements.
- Thermionic Emission: Laser irradiation causes the graphene to eject "hot electrons," which rapidly reduce metal ions into atoms.
- Liquid Bead Splitting: High laser-induced pressure prevents molten metal from clumping, forcing it into small, uniform droplets that solidify into nanoparticles.
Electrocatalytic Performance and Versatility
The integrated HEA/LIG electrodes were tested for the oxygen evolution reaction (OER) in alkaline media. They exhibited an overpotential of only 293 mV at 10 mA/cm² and exceptional stability for over 428 hours. In comparison, commercial RuO₂ catalysts began to disintegrate within just 2 hours under identical conditions. Furthermore, the versatility of this laser solid-phase technique was demonstrated by successfully synthesizing HEA oxides, sulfides, and phosphides.
Conclusion
This laser solid-phase synthesis method achieves a massive production rate of 30 g/h, offering a viable path for the large-scale manufacture of high-performance HEA nanoparticles. By leveraging the unique electronic and thermal properties of laser-induced graphene, this approach provides a robust platform for developing advanced catalysts for green energy applications.
Summary updated