Large System Analysis of the Energy Consumption Distribution in Multi-User MIMO Systems With Mobility

Luca Sanguinetti, Aris L. Moustakas, Emil Björnson, Mérouane Debbah

Introduction

As cellular networks expand into rural and off-grid areas, base stations (BSs) increasingly rely on limited energy sources such as batteries and solar panels. In these scenarios, the risk of a "power outage"—depleting the energy source before it can be recharged—is a critical design constraint. While traditional Multi-User MIMO (MU-MIMO) research focuses on minimizing instantaneous power in static environments, this paper introduces a rigorous mathematical framework to predict energy consumption distribution over time when users are in motion.

The Challenge: Power Outages in Off-Grid Networks

Most existing models assume a static snapshot of the network. However, user mobility significantly impacts energy requirements; a user lingering at the cell edge requires substantially more transmit power than one near the BS. To design reliable, battery-powered infrastructure, engineers require more than just the average power usage; they need the statistical distribution of energy consumption to calculate the probability of failure.

Methodology: Modeling Mobility and Large Systems

The authors model a single-cell downlink system where a BS with $N$ antennas serves $K$ users. They employ several key techniques to bridge the gap between mobility and energy statistics:

  • Mobility Modeling: Users move according to a random walk, which converges to Brownian motion in the limit of small steps.
  • Large System Analysis: Utilizing Random Matrix Theory, the authors analyze the regime where $N$ and $K$ grow large with a fixed ratio $c = K/N$. This allows for the derivation of "deterministic equivalents" that simplify complex matrix operations into concise formulas.
  • Precoding Comparison: The study evaluates four linear precoding techniques: Optimal Linear Precoding (OLP), Maximum Ratio Transmission (MRT), Zero Forcing (ZF), and Regularized Zero Forcing (RZF).
Table 1: Simulation parameters used to validate the theoretical MU-MIMO mobility model.

Key Insights: The Dominance of Mobility

A primary finding of the research is that energy fluctuations in large systems are primarily driven by user mobility rather than small-scale fading. While fast fading effects effectively "average out" as the number of users increases (scaling as $1/K^2$), mobility-induced fluctuations scale as $1/K$, making movement the dominant factor in energy uncertainty.

Furthermore, the authors prove that the total energy consumed over a time interval $T$ converges to a Gaussian (normal) distribution. This convergence allows network designers to use standard Q-function mathematics to determine the exact battery capacity required to keep the probability of a power outage below a target threshold.

Results and Validation

The theoretical derivations were validated using Monte Carlo simulations. The results demonstrate that as the observation time $T$ increases, the energy consumption per unit of time becomes more predictable, staying closer to the calculated mean.

Table 2: Validation of theoretical mean and variance against Monte Carlo simulations across different scenarios and time intervals.

Key performance results include:

  • Precoding Efficiency: OLP and RZF significantly outperform ZF and MRT. For example, MRT can increase mean energy consumption by nearly 8x compared to OLP.
  • RZF Optimality: Regularized Zero Forcing (RZF) is shown to be asymptotically equivalent to the optimal precoder when users have identical rate requirements, making it a practical choice for energy-constrained systems.
  • Analytical Dimensioning: The paper provides closed-form expressions for the optimal cell radius $R^*$ that minimizes energy consumption per unit area, balancing transmission power against fixed hardware costs.

Conclusion

By incorporating user mobility into energy analysis, this research provides a vital tool for the design of sustainable, off-grid cellular infrastructure. The discovery that energy consumption follows a predictable Gaussian distribution simplifies the complex task of battery dimensioning, ensuring that next-generation networks can remain operational even under the uncertainty of user movement.

Summary updated

Abstract

In this work, we consider the downlink of a single-cell multi-user MIMO system in which the base station (BS) makes use of N antennas to communicate with K single-antenna user equipments (UEs). The UEs move around in the cell according to a random walk mobility model. We aim at determining the energy consumption distribution when different linear precoding techniques are used at the BS to guarantee target rates within a finite time interval T. The analysis is conducted in the asymptotic regime where N and K grow large with fixed ratio under the assumption of perfect channel state information (CSI). Both recent and standard results from large system analysis are used to provide concise formulae for the asymptotic transmit powers and beamforming vectors for all considered schemes. These results are eventually used to provide a deterministic approximation of the energy consumption and to study its fluctuations around this value in the form of a central limit theorem. Closed-form expressions for the asymptotic means and variances are given. Numerical results are used to validate the accuracy of the theoretical analysis and to make comparisons. We show how the results can be used to approximate the probability that a battery-powered BS runs out of energy and also to design the cell radius for minimizing the energy consumption per unit area. The imperfect CSI case is also briefly considered.
BibTeX
@article{sanguinetti2014large,
  author = {Luca Sanguinetti and Aris L. Moustakas and Emil Björnson and Mérouane Debbah},
  title = {{Large System Analysis of the Energy Consumption Distribution in Multi-User MIMO Systems With Mobility}},
  journal = {IEEE Transactions on Wireless Communications},
  year = {2014},
  doi = {10.1109/twc.2014.2372761},
}
Figure