Abstract
Cognitive radio (CR) is an effective solution to improve the spectral efficiency (SE) of wireless communications by allowing the secondary users (SUs) to share spectrum with primary users (PUs). Meanwhile, intelligent reflecting surface (IRS) has been recently proposed as a promising approach to enhance SE and energy efficiency (EE) of wireless communication systems through intelligently reconfiguring the channel environment. In this paper, we consider an IRS-assisted downlink CR system, in which a secondary access point (SAP) communicates with multiple SUs without affecting multiple PUs in the primary network and all nodes are equipped with multiple antennas. Our design objective is to maximize the achievable weighted sum rate (WSR) of SUs subject to the total transmit power constraint at the SAP and the interference constraints at PUs, by jointly optimizing the transmit precoding at the SAP and the reflecting coefficients at the IRS. To deal with the complex objective function, the problem is reformulated by employing the well-known weighted minimum mean-square error (WMMSE) method and an alternating optimization (AO)-based algorithm is proposed. Furthermore, a special scenario with only one PU is considered and AO algorithm is adopted again. It is worth mentioning that the proposed algorithm has a much lower computational complexity than the above algorithm without the performance loss. Finally, some numerical simulations have been provided to demonstrate that the proposed algorithm outperforms other benchmark schemes.
Introduction: The Challenge of Spectrum Scarcity
As wireless spectrum becomes increasingly crowded due to the explosion of mobile data traffic, Cognitive Radio (CR) has emerged as a vital technology for enhancing spectral efficiency. CR allows "Secondary Users" (SUs) to opportunistically access spectrum bands licensed to "Primary Users" (PUs). The fundamental constraint in such systems is the "interference temperature": SUs must ensure that their transmissions do not exceed a specific interference threshold at the PUs, thereby protecting the primary network's quality of service.
While Multiple-Input Multiple-Output (MIMO) technology provides the spatial degrees of freedom necessary to steer signals toward SUs and away from PUs, its effectiveness is often limited by the physical propagation environment. Obstacles like buildings or walls can create unfavorable channel conditions. This paper addresses this limitation by integrating an Intelligent Reflecting Surface (IRS) into the MIMO CR framework.
System Model and Problem Formulation
The researchers consider a downlink CR system where a Secondary Access Point (SAP) serves multiple SUs in the presence of multiple PUs. All nodes—the SAP, SUs, and PUs—are equipped with multiple antennas, creating a complex interference environment.
As shown in Figure 1, the IRS acts as a "smart mirror" consisting of numerous passive reflecting elements. Each element can independently shift the phase of incoming electromagnetic waves. By carefully designing these phase shifts, the IRS can reconfigure the wireless channel to constructively combine signals at the SUs while destructively interfering with signals reaching the PUs. The goal is to maximize the Weighted Sum Rate (WSR) of the SUs by jointly optimizing the SAP's transmit precoding and the IRS's reflecting coefficients, subject to power and interference constraints.
Proposed Methodology: Joint Optimization via WMMSE and AO
The resulting optimization problem is highly non-convex due to the coupling between the precoding matrices and the IRS phase shifts, as well as the unit-modulus constraints on the IRS elements. To tackle this, the authors employ a multi-step algorithmic approach:
- WMMSE Reformulation: The complex WSR maximization problem is transformed into an equivalent Weighted Minimum Mean-Square Error (WMMSE) problem. This reformulation allows for a more manageable decoupling of the optimization variables.
- Alternating Optimization (AO): The SAP precoders and the IRS phase shifts are optimized iteratively. By fixing one set of variables, the other can be solved more efficiently, and the process continues until convergence.
- Handling Unit-Modulus Constraints: To address the constraint that IRS elements can only change phase (not amplitude), the authors utilize a Penalty Function method combined with Successive Convex Approximation (SCA).
- Low-Complexity Special Case: For scenarios with a single PU, the authors developed a specialized algorithm using Lagrangian dual decomposition. This approach exploits the specific matrix structures of the single-PU case to avoid computationally expensive matrix inversions, significantly speeding up the process without compromising performance.
Performance Evaluation and Key Insights
The proposed algorithms were evaluated using Monte Carlo numerical simulations based on standard Rician and Rayleigh fading models. Key findings include:
- Significant Spectral Efficiency Gains: The optimized IRS-assisted system significantly outperformed benchmark schemes, such as systems without an IRS or those with fixed-phase IRS elements. For instance, at a transmit power of 10W, the optimized system achieved a WSR of approximately 12 bps/Hz, compared to roughly 9 bps/Hz for the no-IRS baseline.
- Scalability with IRS Size: The WSR increases almost linearly with the number of IRS elements ($M$). Doubling $M$ from 40 to 80 provided a substantial and consistent boost in the achievable rate, highlighting the "degrees-of-freedom" boost provided by the IRS.
- Rapid Convergence: Both the general and the specialized single-PU algorithms demonstrated high efficiency, typically converging within 10 iterations. The specialized algorithm, in particular, showed a marked reduction in computational time.
Conclusion and Future Directions
This work demonstrates that IRS technology is a powerful tool for enhancing the performance of MIMO cognitive radio systems. By intelligently reconfiguring the radio environment, the IRS allows secondary networks to achieve higher data rates while strictly adhering to interference constraints for primary users.
However, the study assumes Perfect Channel State Information (CSI), which is challenging to obtain in practice, especially for passive IRS elements. Future research directions include developing robust beamforming designs that account for CSI estimation errors, exploring the impact of discrete phase shifts, and investigating the deployment of multiple IRSs to provide broader coverage in complex urban environments.
Summary updated