Introduction
In the evolution of wireless communication, Two-Way Relaying Channels (TWRC) have emerged as a vital architecture for spectral efficiency, allowing two nodes to exchange information through a central relay. However, practical implementation faces two significant challenges: the energy constraints of battery-powered user terminals and the noise amplification inherent in traditional Amplify-and-Forward (AF) relaying.
This paper addresses these issues by proposing a joint design for multi-antenna TWRC systems that integrates Simultaneous Wireless Information and Power Transfer (SWIPT) with Compute-and-Forward (CoF) relaying. By leveraging nested lattice codes, the proposed system enables users to harvest energy from the relay's signal to power their uplink transmissions while avoiding the pitfalls of noise amplification.
System Model and Transmission Scheme
The proposed architecture utilizes a multi-antenna relay and single-antenna user nodes. The communication process is divided into two distinct phases: the Multiple Access (MA) stage and the Broadcast (BC) stage.
Multiple Access (MA) Stage
During the MA stage, users transmit signals encoded with nested lattice codes to the relay. Unlike traditional relaying, the relay does not attempt to decode individual messages. Instead, it uses a multi-antenna receiver vector to "compute" a linear combination of the user messages. This CoF approach significantly improves efficiency by treating the superimposed signals as a structured code rather than interference.
Broadcast (BC) Stage and Energy Harvesting
In the BC stage, the relay broadcasts the processed message combination back to the users. Each user terminal is equipped with a Power Splitter (PS) that divides the received signal into two streams:
- Information Decoding (ID): A portion of the signal is directed to the decoder to retrieve the intended data.
- Energy Harvesting (EH): The remaining portion is sent to an energy harvester to replenish the terminal's battery for future transmissions.
Optimization Framework
The core contribution of this work is a joint optimization algorithm designed to minimize the relay's transmit power while satisfying minimum data rate requirements for both users. The problem is inherently complex and non-convex because the beamforming vectors, receiver vectors, and power-splitting ratios are deeply coupled.
To tackle this, the authors employ:
- Semi-Definite Relaxation (SDR) and Programming (SDP): These techniques transform the non-convex optimization problem into a convex form that can be solved efficiently.
- Iterative Joint Algorithm: The variables are optimized iteratively. By fixing a subset of variables and optimizing the others, the algorithm cycles through the parameters until the system converges to an optimal state.
Performance Evaluation and Key Insights
The effectiveness of the proposed joint design was validated through Monte Carlo simulations using 100 random Rayleigh fading channel realizations. The study compared the joint design against several baseline schemes, including those that optimized only beamforming or only receiver design.
Key Results
- Efficiency Gains: The joint design consistently required the lowest transmit power across various Signal-to-Noise Ratio (SNR) levels. Notably, it achieved a 9dB advantage over the "joint beamforming and power splitting" baseline, highlighting the critical importance of including the receiver design in the optimization process.
- Optimization Hierarchy: The results indicate that beamforming design contributes most significantly to performance gains, followed by receiver design, with power splitter optimization providing smaller but necessary improvements.
- Robustness: The algorithm maintained superior power efficiency even as internal circuit power consumption increased, demonstrating its resilience for practical hardware implementations.
Conclusion and Future Directions
This research demonstrates that a holistic approach to transceiver and power splitter design, combined with nested lattice codes, can dramatically improve the efficiency of energy-constrained two-way relaying systems. While the current model assumes single-antenna users and perfect channel state information (CSI), future work could extend these findings to multi-antenna user terminals and account for imperfect CSI and pathloss in more complex deployment scenarios.
Summary updated