Joint spectral efficiency optimization of uplink and downlink for massive MIMO-enabled wireless energy harvesting systems

Wenfeng Sun, Chen Liu, Mujun Qian, Yan Chen, Shu Xu

Abstract

This paper investigates spectral efficiency (SE) in massive multiple-input multiple-output (MIMO) systems where terminals lack fixed power supplies and rely on radio frequency (RF) energy harvesting. By introducing a hybrid protocol that combines time-switching (TS) and power-splitting (PS) techniques, the authors develop a unified framework for joint uplink and downlink optimization. An iterative algorithm based on geometric programming is proposed to solve the resulting non-convex problem, demonstrating significant SE improvements over traditional single-protocol approaches.

The Challenge of Powering Smart Terminals

As the Internet of Things (IoT) expands into medical implants, industrial monitoring, and remote sensing, powering these "smart terminals" remains a critical hurdle. Battery replacement is often impractical or impossible in these environments. Wireless Energy Harvesting (EH) offers a sustainable solution, allowing devices to replenish their energy from the RF signals transmitted by a base station (BS).

Existing research typically treats uplink (terminal to BS) and downlink (BS to terminal) as separate optimization problems. Furthermore, most systems rely on either Time-Switching (TS)—alternating between data reception and energy harvesting—or Power-Splitting (PS)—dividing a single signal for simultaneous data and energy processing. This paper addresses these gaps by proposing a "Hybrid" protocol designed to maximize joint Spectral Efficiency (SE) across both directions.

A Unified Hybrid Protocol

The proposed system model utilizes a massive MIMO base station to serve multiple single-antenna terminals. The core innovation is the hybrid protocol, which acts as a flexible framework. By tuning specific parameters, the system can operate as a pure TS protocol, a pure PS protocol, or a combination of both, allowing it to adapt dynamically to varying channel conditions.

System model of a massive MIMO network using the hybrid wireless energy harvesting protocol.

The Four-Phase Frame Structure

To facilitate joint optimization, the communication process is organized into a four-phase frame structure:

  1. Uplink Pilots: Terminals transmit pilot signals, enabling the BS to estimate the channel state.
  2. Downlink Wireless Power Transfer (WPT): The BS transmits pure energy to the terminals (TS-style harvesting).
  3. Downlink SWIPT: The BS transmits data and energy simultaneously; terminals use power-splitting to decode data while harvesting energy.
  4. Uplink Data: Terminals utilize the total harvested energy to transmit data back to the BS.
The four-phase frame structure used for joint uplink and downlink transmission.

Optimization Methodology

The resulting optimization problem is non-convex, making it mathematically complex to solve directly. The authors developed a two-step iterative algorithm:

  • One-Dimensional Search: Used to determine the optimal time durations for channel estimation and energy transfer.
  • Successive Approximation via Geometric Programming (GP): Used to optimize power allocation coefficients, power-splitting ratios, and energy allocation fractions.

Numerical simulations using i.i.d. Rayleigh fading channels validated the approach. The algorithm typically converges within 31 iterations, providing a computationally efficient solution for real-time applications.

Key Insights and Results

  • Protocol Superiority: The hybrid protocol consistently outperforms pure TS and matches or exceeds pure PS performance, proving the value of flexibility in EH systems.
  • Resource Prioritization: A key finding is that time allocation (harvesting vs. transmitting) has a more significant impact on SE than the absolute amount of energy harvested.
  • Impact of Massive MIMO: Increasing the number of BS antennas ($M$) significantly boosts SE. For instance, a configuration with 300 antennas and 3 terminals achieved a sum SE of approximately 18.8 bit/s/Hz.
  • Channel Hardening: Due to the channel hardening effect in massive MIMO, the system benefits from shorter channel estimation phases, leaving more time for data transmission.

Conclusion and Future Directions

This research provides a robust framework for optimizing sustainable wireless networks. While the current model assumes linear energy harvesting and Rayleigh fading, future work will explore non-linear EH models, Rician fading (Line-of-Sight components), and the impact of hardware impairments. These additions will further bridge the gap between theoretical optimization and real-world deployment in next-generation IoT ecosystems.

Summary updated

Abstract

Abstract This paper investigated the spectral efficiency (SE) in massive multiple-input multiple-output systems, where all terminals have no fixed power supply and thus need to replenish energy via the received signals from the base station. The hybrid wireless energy harvesting (EH) protocol is applied for each terminal, which can switch to either existing time-switching (TS) protocol or power-splitting (PS) protocol. Based on the hybrid wireless EH protocol, a general system model is developed, which can switch to either only uplink data transmission or only downlink data transmission. As a result, a general analytical framework is formulated. Then, closed-form lower bound expressions on SE for each terminal are obtained on the uplink and downlink, respectively. According to these expressions, the joint SE of uplink and downlink maximization problem is designed with some practical constraints. As the designed optimization problem is non-linear and non-convex, it is hard to solve directly. To provide a solution, an iteration algorithm is proposed by utilizing one-dimensional search technique and successive approximation method based on geometric program. Additionally, the convergence and complexity of the proposed algorithm are discussed as well. Finally, the feasibility of the proposed algorithm is analyzed by simulations. Numerical results manifest that the proposed algorithm can provide good SE by optimizing relevant system parameters, and the system model can help to discuss the TS, PS or hybrid protocol for only uplink data transmission, only downlink data transmission or joint data transmission of uplink and downlink in the considered system.
BibTeX
@inproceedings{sun2021joint,
  author = {Wenfeng Sun and Chen Liu and Mujun Qian and Yan Chen and Shu Xu},
  title = {{Joint spectral efficiency optimization of uplink and downlink for massive MIMO-enabled wireless energy harvesting systems}},
  booktitle = {EURASIP},
  year = {2021},
  doi = {10.1186/s13638-021-02057-4},
}
Figure