Joint Spatial Division and Multiplexing with Customized Orthogonal Group Channels in Multi-RIS-Assisted Systems

Weicong Chen, Chao-Kai Wen, Wankai Tang, Xiao Li, Shi Jin

TL;DR

This paper introduces a novel, low-complexity Joint Spatial Division and Multiplexing (JSDM) scheme for multi-user wireless systems assisted by multiple Reconfigurable Intelligent Surfaces (RISs). By strategically deploying RISs and customizing their reflection properties, the system achieves effective channel block-diagonalization, significantly enhancing spectral efficiency and reducing interference, even in challenging scenarios with blocked direct links.

What Problem Does This Paper Address?

Traditional JSDM schemes, designed to improve spectral efficiency in multi-user scenarios, often rely on complex matrix decomposition and require extensive channel state information (CSI), leading to high computational complexity and hardware costs. This is particularly challenging in Frequency Division Duplex (FDD) systems where CSI acquisition is difficult. Furthermore, existing JSDM approaches struggle with scenarios where direct line-of-sight (LoS) links are obstructed or when multiple users are in close proximity, leading to rank-deficient channels and limited spatial multiplexing gains. The paper addresses these limitations by leveraging the unique capabilities of RISs to actively shape the wireless environment and simplify JSDM implementation.

Methods

The proposed approach introduces a "RIS-customized channel" for JSDM. Key methods include:

  • Strategic RIS Deployment: RISs are positioned at the Discrete Fourier Transform (DFT) directions of the base station (BS) antenna array. This creates orthogonal LoS links between the BS and each RIS, simplifying the pre-beamforming (PBF) design.
  • Low-Complexity PBF: Instead of complex matrix decomposition, the PBF is constructed using DFT vectors, leveraging the directional information from LoS paths. This significantly reduces computational complexity and allows for implementation on hybrid antenna architectures, lowering hardware costs.
  • RIS Reflection Optimization: RISs are configured with optimized reflection directions to mitigate inter-group interference in the RIS-UE channel. This involves designing beam biases to steer signals towards intended user groups.
  • UE and RIS Grouping/Association: A K-means clustering approach is used to group UEs based on their direction vectors, minimizing channel correlation within groups. A path loss-based RIS grouping and UE-RIS association strategy is then employed to further reduce interference and ensure each UE receives an independent data stream.
  • Block Diagonalization (BD): The combination of RIS deployment, PBF, and RIS reflection optimization aims to achieve a block-diagonal effective channel, which is crucial for suppressing inter-group interference in JSDM.

Datasets

Not discussed in the paper. The paper relies on simulations to evaluate its proposed scheme.

Key Insights and Ideas

  • RIS as a Channel Customizer: RISs are not just passive reflectors but active components that can be intelligently configured to "customize" the wireless channel, making it more amenable to efficient transmission schemes like JSDM.
  • DFT Directions for Orthogonality: Placing RISs at DFT directions of the BS is a clever way to induce orthogonality in the BS-RIS channel, drastically simplifying the PBF design and reducing computational load.
  • Trade-off in RIS Configuration: Different RIS configurations (e.g., optimizing for interference-limited vs. noise-limited regimes) offer distinct performance advantages, highlighting a trade-off that can be managed based on system conditions.
  • Robustness to Rician Factor: The proposed JSDM scheme demonstrates robustness across a wide range of Rician factors, indicating that it performs well even when LoS paths are not overwhelmingly dominant.
  • Low-Complexity Advantage: The core innovation lies in achieving the benefits of JSDM with significantly reduced computational complexity and hardware requirements compared to conventional methods.

Key Results

  • Enhanced Spectral Efficiency: Numerical simulations show significant improvements in sum spectral efficiency (SE) compared to existing JSDM schemes, particularly in interference-limited and noise-limited regimes.
  • Effective Channel Block Diagonalization: The proposed methods effectively achieve a block-diagonal structure in the effective channel, leading to reduced inter-group interference.
  • Reduced Complexity: The PBF design complexity is reduced from O((MB)³) in conventional JSDM to O(1) with the proposed RIS-assisted approach.
  • Improved Spatial Multiplexing Gain: The multi-RIS architecture, combined with strategic deployment and configuration, leads to a higher effective channel rank, enabling greater spatial multiplexing.
  • Performance under Impairments: The paper analyzes the impact of deployment offsets and phase noise, showing that while they degrade performance, the proposed scheme remains effective, especially with optimized configurations.

Limitations and Future Work

  • Idealized Assumptions: The paper assumes ideal conditions such as perfect CSI (S-CSI), continuous phase shifts for RIS elements, and perfect synchronization. The impact of practical impairments like phase noise and discrete phase shifts is analyzed, but further research could explore more sophisticated mitigation techniques.
  • Optimal RIS Deployment: While the paper investigates RIS placement at DFT directions for orthogonality, it acknowledges that this might not yield the absolute optimal system link quality (e.g., maximal SNR). Future work could explore balancing SNR gain and spatial multiplexing gain through optimal RIS deployment strategies.
  • UE-RIS Association Complexity: While a brute-force search is adopted for UE selection and RIS-UE association, more efficient algorithms could be explored for larger systems.
  • Dynamic Environments: The current work focuses on fixed RIS positions. Future research could investigate dynamic RIS deployment or reconfigurations in highly mobile or rapidly changing environments.

Summary updated

Abstract

Reconfigurable intelligent surfaces (RISs) offer the unique capability to reshape the radio environment, thereby simplifying transmission schemes traditionally contingent on channel conditions. Joint spatial division and multiplexing (JSDM) emerges as a low-overhead transmission scheme for multi-user equipment (UE) scenarios, typically requiring complex matrix decomposition to achieve block-diagonalization of the effective channel matrix. In this study, we introduce an innovative JSDM design that leverages RISs to customize channels, thereby streamlining the overall procedures. By strategically positioning RISs at the discrete Fourier transform (DFT) directions of the base station (BS), we establish orthogonal line-of-sight links within the BS-RIS channel, enabling a straightforward pre-beamforming design. Based on UE grouping, we devise reflected beams of the RIS with optimized directions to mitigate inter-group interference in the RISs-UEs channel. An approximation of the channel cross-correlation coefficient is derived and serves as a foundation for the RISs-UEs association, further diminishing inter-group interference. Numerical results substantiate the efficacy of our RIS-customized JSDM in not only achieving effective channel block-diagonalization but also in significantly enhancing the sum spectral efficiency for multi-UE transmissions.
BibTeX
@misc{chen2025joint,
  author = {Weicong Chen and Chao-Kai Wen and Wankai Tang and Xiao Li and Shi Jin},
  title = {{Joint Spatial Division and Multiplexing with Customized Orthogonal Group Channels in Multi-RIS-Assisted Systems}},
  year = {2025},
  eprint = {2507.01641},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2507.01641},
}
Figure