Joint Holographic Beamforming and User Scheduling With Individual QoS Constraints

Chandan Kumar Sheemar, Christo Kurisummoottil Thomas, George C. Alexandropoulos, Jorge Querol, Symeon Chatzinotas, Walid Saad

TL;DR

This paper introduces a novel optimization framework for 6G networks that jointly manages user scheduling and holographic beamforming using Reconfigurable Holographic Surfaces (RHS). By combining a greedy user selection strategy with gradient-ascent optimization, the authors achieve significantly higher network throughput while strictly guaranteed that every scheduled user meets their minimum Quality-of-Service (QoS) requirements.

What Problem Does This Paper Address?

As we move toward 6G, wireless networks face a "triple threat" of demands: unprecedented spectral efficiency, low energy consumption, and the ability to handle massive numbers of users. Traditional Phased Array Antennas (PAAs) are the current standard, but they are often bulky, expensive, and power-hungry due to their reliance on complex phase-shifting circuits.

Reconfigurable Holographic Surfaces (RHS) offer a promising alternative. Built using low-cost printed circuit boards (PCBs), they use metamaterials to "record" and "reconstruct" electromagnetic waves, much like an optical hologram. However, RHS technology introduces a massive mathematical headache:

  1. Hardware Constraints: Unlike traditional arrays that adjust phase, RHS elements adjust real-valued amplitudes (between 0 and 1).
  2. Combinatorial Complexity: Deciding which users to serve (scheduling) while simultaneously shaping the beams (beamforming) creates a "mixed-integer non-convex" optimization problem—one of the hardest types of problems to solve efficiently in real-time.

Methods

The authors propose a three-stage iterative framework to break down this complex problem into manageable pieces:

  1. Digital Beamforming (Zero-Forcing): At the baseband level, the system uses Zero-Forcing (ZF) to cancel out interference between users. This ensures that the signal intended for User A doesn't "leak" into the signal for User B.
  2. Analog Holographic Beamforming (Gradient Ascent): To optimize the RHS itself, the authors derived closed-form expressions for the gradient of the network sum-rate. They use a gradient-ascent algorithm to iteratively tweak the real-valued weights of the holographic surface to maximize signal strength and minimize interference.
  3. Greedy User Scheduling: Since checking every possible combination of users is impossible, the paper uses a greedy principle. It starts by assuming all users are active, calculates their potential rates, and then iteratively selects the "best" users one by one. Crucially, after adding a user, it re-optimizes the beamformers and checks if everyone still meets their minimum QoS (e.g., 5 bps/Hz). If a user's addition causes someone else's rate to drop below the threshold, that user is rejected.

Datasets

The study relies on extensive numerical simulations rather than a static dataset.

  • Channel Model: They used a sparse millimeter-wave (mmWave) channel model with multiple propagation paths.
  • Parameters: Simulations were conducted for a system with 6 users, a base station with 8 RF chains, and RHS sizes of $6 \times 6$ (36 elements) and $8 \times 8$ (64 elements).
  • Benchmarks: The proposed algorithm was compared against a benchmark scheme that uses random holographic weights while still optimizing digital beamforming and scheduling.

Key Insights and Ideas

  • The Power of Amplitude: Traditional beamforming is all about phase. RHS shifts the paradigm to amplitude-controlled "holographic patterns." The paper demonstrates that even with the constraint that weights must be between 0 and 1 (no amplification at the surface), highly directional beams can be formed.
  • Jointness is Mandatory: You cannot optimize scheduling and beamforming in isolation. Because the RHS beam pattern changes the "effective channel" for the digital beamformer, the two must be updated in a loop to reach a stable, high-performance state.
  • Scalability via RHS: Increasing the number of RHS elements from 36 to 64 showed a dramatic improvement in the average per-user rate. This suggests that RHS is a highly scalable technology for 6G, providing "more gain for less power" compared to traditional arrays.

Key Results

  • QoS Satisfaction: The algorithm successfully maintained the minimum QoS requirement of 5 bps/Hz for all scheduled users across various Signal-to-Noise Ratio (SNR) levels.
  • Sum-Rate Gains: The proposed joint optimization significantly outperformed the benchmark. For example, at an SNR of 30 dB, the proposed scheme achieved a sum-rate nearly 20-30% higher than the benchmark with random holographic weights.
  • User Fairness: While the greedy algorithm prioritizes users with better channels to maximize total throughput, the QoS constraint ensures that even users with poorer conditions are served as long as the network has the resources to meet their minimum needs.

Limitations and Future Work

  • CSI Assumption: The paper assumes perfect Channel State Information (CSI). In real-world 6G environments, channel estimation for thousands of holographic elements is a massive overhead challenge.
  • Computational Complexity: While the iterative approach is faster than an exhaustive search, the "inner loop" of gradient ascent for hundreds or thousands of RHS elements might still be too slow for ultra-low-latency 6G applications.
  • Future Directions: The authors suggest exploring deep learning-based approaches to replace the iterative optimization, potentially allowing for near-instantaneous beamforming and scheduling decisions.

Summary updated

Abstract

Reconfigurable holographic surfaces (RHS) have emerged as a transformative material technology, enabling dynamic control of electromagnetic waves to generate versatile holographic beam patterns. This paper addresses the problem of joint hybrid holographic beamforming and user scheduling under per-user minimum quality-of-service (QoS) constraints, a critical challenge in resource-constrained networks. However, such a problem results in mixed-integer non-convex optimization, making it difficult to identify feasible solutions efficiently. To overcome this challenge, we propose a novel iterative optimization framework that jointly solves the problem to maximize the RHS-assisted network sum-rate, efficiently managing holographic beamforming patterns, dynamically scheduling users, and ensuring the minimum QoS requirements for each scheduled user. The proposed framework relies on zero-forcing digital beamforming, gradient-ascent-based holographic beamformer optimization, and a greedy user selection principle. Our extensive simulation results validate the effectiveness of the proposed scheme, demonstrating their superior performance compared to the benchmark algorithms in terms of sum-rate performance, while meeting the minimum per-user QoS constraints
BibTeX
@article{sheemar2025joint,
  author = {Chandan Kumar Sheemar and Christo Kurisummoottil Thomas and George C. Alexandropoulos and Jorge Querol and Symeon Chatzinotas and Walid Saad},
  title = {{Joint Holographic Beamforming and User Scheduling With Individual QoS Constraints}},
  journal = {IEEE Trans. Vehicular Technology},
  year = {2025},
  doi = {10.1109/tvt.2025.3569401},
}

Loading related content...

Figure