Joint Gaussian Beam Pattern and Its Optimization for Positioning-Assisted Systems

Yuanbo Liu, Bingcheng Zhu, Yuan Yao, Han Zhang, Zaichen Zhang

TL;DR

This paper introduces a novel positioning-assisted beamforming approach for massive MIMO systems that bypasses the need for complex CSI estimation. The authors derive closed-form expressions for outage probability and optimal beam patterns in both 2D and 3D scenarios, offering a more efficient and analytically tractable method for optimizing wireless communication reliability.

What Problem Does This Paper Address?

Massive MIMO systems, crucial for modern wireless communication, rely heavily on beamforming to enhance signal strength and efficiency. However, traditional beamforming methods require accurate Channel State Information (CSI), which is challenging and costly to obtain in large-scale systems due to high training overhead and feedback requirements. This paper addresses the limitations of CSI-dependent beamforming by proposing a positioning-assisted approach. Instead of relying on direct channel measurements, this method leverages the receiver's estimated position to guide the beamforming process, thereby circumventing the complex CSI estimation and its associated costs. The authors aim to provide a theoretical framework to understand and optimize this positioning-assisted beamforming, particularly focusing on its outage probability and the optimal beam pattern design.

Methods

The core of this paper lies in its analytical approach to positioning-assisted beamforming. The authors derive closed-form expressions for the outage probability in both 2D and 3D scenarios, taking into account factors like positioning error distribution, link distance, transmission power, and beamwidth. They then use these expressions to derive closed-form solutions for the optimal joint Gaussian beam pattern. A key aspect of their methodology involves analyzing the asymptotic performance of their derived outage probability expressions, providing insights into their convergence speed. For the 3D case, they employ eigenvalue decomposition and transformations to simplify complex integrals and derive tractable expressions. The optimization of the beam pattern is achieved by minimizing the derived outage probability expressions.

Datasets

Not discussed in the paper. The paper focuses on theoretical analysis and simulation results, not on training or evaluating models on specific datasets.

Key Insights and Ideas

  • CSI-Free Beamforming: The paper demonstrates that accurate positioning information can effectively replace CSI for beamforming, significantly reducing system complexity and overhead.
  • Analytical Tractability: Deriving closed-form expressions for outage probability and optimal beam patterns is a major contribution, enabling direct optimization without iterative numerical methods.
  • 2D vs. 3D Differences: The optimal beam pattern in 2D scenarios is shown to be independent of the positioning error distribution, while in 3D, it is dependent, highlighting the increased complexity of three-dimensional spatial management.
  • Trade-off in Beamwidth: The optimal beamwidth exhibits a trade-off: wider beams are preferred for increased transmit power to cover larger areas, while narrower beams are beneficial for higher positioning accuracy to concentrate energy.
  • Positioning Error Alignment: In 3D, aligning the beam's principal axes with the positioning error's spatial distribution is crucial for minimizing outage probability.

Key Results

The paper provides:

  • Closed-form expressions for the outage probability in 2D and 3D positioning-assisted beamforming systems.
  • Closed-form expressions for the optimal 2D and 3D Gaussian beam patterns.
  • Analysis of the asymptotic performance of the derived outage probability expressions, showing their convergence.
  • Numerical results that validate the theoretical derivations and demonstrate the effectiveness of the proposed beam pattern optimization. For instance, figures show that the theoretical and simulated outage probabilities closely match, and the optimal beamwidth consistently achieves lower outage probability compared to fixed beamwidths.

Limitations and Future Work

  • Approximation Accuracy: While the paper provides asymptotic analysis, the accuracy of the derived expressions might be affected by approximations, especially in scenarios with small distances or large positioning errors.
  • Idealized Assumptions: The analysis relies on certain idealized assumptions, such as Gaussian distribution of positioning errors and specific antenna patterns. Real-world scenarios might involve more complex distributions and antenna characteristics.
  • Future Work: The authors suggest further research into more complex scenarios, such as incorporating realistic channel models, non-Gaussian positioning errors, and exploring the integration of positioning-assisted beamforming in more advanced systems like ISAC (Integrated Sensing and Communication). The paper also hints at the potential for extending these findings to dynamic environments and multi-user scenarios.

Summary updated

Abstract

Beamforming is a fundamental technology that not only enhances communication efficiency but also lays the foundation for massive multiple-input multiple-output~(MIMO) systems. However, its reliance on accurate channel state information (CSI) estimation introduces significant training overhead and feedback costs, especially in large-scale antenna systems. In this paper, we investigate positioning-assisted beamforming as a competitive alternative to the CSI-based methods, which circumvents the complicated CSI estimation. In particular, we analyze the outage probability of positioning-assisted systems with joint Gaussian beams and derive its closed-form expressions for both two-dimensional~(2D) and three-dimensional~(3D) scenarios. Based on these results, we also derive closed-form expressions for the optimal joint Gaussian beam pattern. The optimal solution is independent of the positioning error distribution in 2D scenarios but depends on it in 3D cases. Subsequently, the asymptotic performance of the approximation error is analyzed. Numerical results verify the derived outage probability expressions, and show the effectiveness of the beam pattern optimization.
BibTeX
@misc{liu2026joint,
  author = {Yuanbo Liu and Bingcheng Zhu and Yuan Yao and Han Zhang and Zaichen Zhang},
  title = {{Joint Gaussian Beam Pattern and Its Optimization for Positioning-Assisted Systems}},
  year = {2026},
  eprint = {2603.03940},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2603.03940},
}
Figure