Abstract
This paper presents a novel framework for Joint Communications and Sensing (JCAS) in MIMO-OFDM systems. By strategically restricting sensing tasks to a subset of "weak" subcarriers—those with poor communication channel conditions—the proposed method decouples the performance trade-off inherent in traditional JCAS designs. This "communications-centric" approach allows the system to maximize data throughput across the entire bandwidth while maintaining high-fidelity radar sensing. Numerical simulations demonstrate that the proposed scheme can achieve up to a 60% increase in achievable data rates compared to conventional methods without compromising sensing accuracy.
Introduction
The integration of wireless communication and radar sensing into a single hardware platform and frequency band, known as Joint Communications and Sensing (JCAS), is a cornerstone of future 6G networks. However, current approaches typically optimize signals across the entire frequency band for both tasks, leading to a significant "sensing tax" where communication throughput is sacrificed for radar precision. This paper identifies that while communication performance is highly dependent on total available bandwidth, radar sensing can remain effective using only a subset of subcarriers.
Methodology
The authors propose a three-step optimization strategy to mitigate the sensing-communication trade-off:
- Subcarrier Selection: The system identifies subcarriers that are naturally weak for communication due to Rayleigh fading. A subset of $J$ such subcarriers is selected to handle joint sensing and communication, while the remaining subcarriers are dedicated exclusively to data transmission.
- Problem Formulation: The design is framed as a rate maximization problem. The objective is to maximize the total data rate across all subcarriers while ensuring the sensing beampattern error remains below a predefined threshold.
- Riemannian Manifold Optimization: Due to the non-convex nature of the beamforming constraints, the authors utilize a Riemannian conjugate gradient scheme. By treating the beamforming constraints as a complex hypersphere manifold, the algorithm efficiently finds near-optimal beamformers that satisfy power constraints and sensing requirements.
Results and Discussion
The proposed method was evaluated in an $8 \times 4$ MIMO-OFDM system with 64 subcarriers. The results highlight a significant breakthrough in spectral efficiency.
As illustrated in the figure above, the proposed scheme offers a substantial improvement in the achievable communication rate. Specifically, in a scenario where 16 out of 64 subcarriers are used for sensing ($J=16$), the system achieves a 60% higher data rate at a Signal-to-Noise Ratio (SNR) of 10 dB compared to conventional all-subcarrier optimization. This gain is achieved by freeing up degrees of freedom for communication on the majority of the subcarriers.
Importantly, this throughput gain does not degrade sensing performance. The normalized beampatterns for $J=16$ and $J=32$ show that peaks remain sharp and accurately localized at the target angles (e.g., $-60^\circ, -30^\circ, 60^\circ$), matching the performance of the "Ideal" and conventional designs. This confirms that the "sensing tax" can be effectively localized to subcarriers that were already underperforming for data transmission.
Conclusion
The proposed communications-centric JCAS design successfully breaks the rigid coupling between sensing and data transmission. By leveraging the frequency-selective nature of wireless channels, the system achieves massive throughput gains while maintaining radar accuracy. Future research will focus on dynamic subcarrier allocation strategies and the impact of hardware impairments in high-mobility environments.
Summary updated