Jammkle: Fibre jamming 3D printed multi-material tendons and their application in a robotic ankle

James Brett, Katrina Lo Surdo, Lauren Hanson, Joshua Pinskier, David Howard

Abstract

Fibre jamming is a relatively new and understudied soft robotic mechanism that has previously found success when used in stiffness-tuneable arms and fingers. However, to date researchers have not fully taken advantage of the freedom offered by contemporary fabrication techniques including multi-material 3D printing in the creation of fibre jamming structures. In this research, we present a novel, modular, multi-material, 3D printed, fibre jamming tendon unit for use in a stiffness-tuneable compliant robotic ankle, or Jammkle. We describe the design and fabrication of the Jammkle and highlight its advantages compared to examples from modern literature. We develop a multiphysics model of the tendon unit, showing good agreement with experimental data. Finally, we demonstrate a practical application by integrating multiple tendon units into a robotic ankle and perform extensive testing and characterisation. We show that the Jammkle outperforms comparative leg structures in terms of compliance, damping, and slip prevention.

Introduction

Walking on uneven, unpredictable terrain remains a significant challenge for legged robots. Most current designs rely on rigid ankle structures which, while robust, lack the inherent compliance necessary to deform under load. This rigidity often leads to jarring impacts, frequent slips, and potential mechanical failure. While complex software and high-speed sensors are often employed to mitigate these issues, a more elegant solution lies in soft robotics and embodied cognition—building the "intelligence" of terrain adaptation directly into the hardware.

Researchers have developed Jammkle, a bio-inspired robotic ankle that utilizes 3D-printed, multi-material tendons to achieve highly tunable stiffness. By leveraging "fibre jamming"—a technique where a bundle of fibres inside a flexible membrane becomes rigid when a vacuum is applied—the team created an ankle that significantly outperforms rigid designs in shock absorption and slip prevention on rough terrain.

Design and Fabrication

The researchers combined advanced fabrication with bio-inspired mechanical design to create the Jammkle system. The core innovation lies in the use of multi-material 3D printing (using a Stratasys Connex3 Polyjet printer) to manufacture tendons consisting of 18 individual fibres. Unlike previous designs that used single materials, each Jammkle fibre is heterogeneous, containing segments of different hardness: a very soft, stretchy section (Shore A-30) and a stiffer, less deformable section (Shore A-85).

Design and application of the Jammkle tendon and robotic joints.

The fibres are arranged in a hexagonal pattern. When a vacuum is applied, the external membrane collapses, forcing the fibres against each other. Because the stiff and soft sections are mirrored across the bundle, the vacuum causes the stiff sections to overlap and lock via friction, preventing the soft sections from stretching. This internalizes the softness; while many soft-robotic feet place the jamming mechanism in direct contact with the ground, Jammkle uses them as internal tendons, maintaining the durability of a rigid exterior "bone" while gaining the benefits of soft robotics.

Four of these tendon units are integrated into the robotic ankle, which features a central ball-and-socket joint. This arrangement mimics human anatomy, with tendons positioned like the Achilles and peroneal tendons to provide stability and 360° axial rotation.

Experimental Results

To evaluate the Jammkle, the team generated original experimental data benchmarking it against rigid aluminum tendons, standard carbon fibre legs, and squash ball feet. The multi-material tendons demonstrated massive tunability, showing a 112.5% increase in mean peak force when jammed versus unjammed. In contrast, tendons made of only soft material saw only a 27.8% increase.

The Jammkle prototype undergoing testing on uneven rocky terrain.

In drop tests, the unjammed Jammkle recorded a maximum deceleration of 32.6 m/s², whereas the rigid and standard legs hit the sensor's limit of 71 m/s². This proves the Jammkle is significantly better at protecting a robot's chassis from impact. Furthermore, during slip tests on a 40° incline, the jammed ankle dissipated significantly more force before sliding compared to rigid structures, leading to more stable footing on unpredictable surfaces.

Conclusion and Future Work

The Jammkle demonstrates that mixing materials within a single fibre is far more effective for stiffness control than using single-material components. This hardware-level damping reduces the computational load on the robot, as the unjammed state acts as a natural shock absorber while the jammed state provides stability for push-off.

Future work will address current limitations, such as the requirement for an external vacuum pump, which adds weight and complexity. Additionally, the researchers aim to explore the use of these tendons as active actuators rather than passive stiffness-tuneable components and use model-based optimization to find the mathematically ideal arrangement of materials for even higher performance.

Summary updated

Abstract

Fibre jamming is a relatively new and understudied soft robotic mechanism that has previously found success when used in stiffness-tuneable arms and fingers. However, to date researchers have not fully taken advantage of the freedom offered by contemporary fabrication techniques including multi-material 3D printing in the creation of fibre jamming structures. In this research, we present a novel, modular, multi-material, 3D printed, fibre jamming tendon unit for use in a stiffness-tuneable compliant robotic ankle, or Jammkle. We describe the design and fabrication of the Jammkle and highlight its advantages compared to examples from modern literature. We develop a multiphysics model of the tendon unit, showing good agreement with experimental data. Finally, we demonstrate a practical application by integrating multiple tendon units into a robotic ankle and perform extensive testing and characterisation. We show that the Jammkle outperforms comparative leg structures in terms of compliance, damping, and slip prevention.
BibTeX
@inproceedings{brett2022jammkle,
  author = {James Brett and Katrina Lo Surdo and Lauren Hanson and Joshua Pinskier and David Howard},
  title = {{Jammkle: Fibre jamming 3D printed multi-material tendons and their application in a robotic ankle}},
  booktitle = {IEEE/RSJ International Conference on Intelligent Robots and Systems},
  year = {2022},
  doi = {10.1109/iros47612.2022.9982171},
}
Figure