Increasing the high-temperature mechanical properties of Mg-Gd-Y-Zn alloys by adding AlN/Al particles
Lists
Only you see this
Abstract
The AlN particles reinforced Mg-10Gd-3Y–1Zn (GWZ) composites were prepared by mixing AlN/Al particles using ball milling followed by stirring casting method. The influence of AlN/Al particles on the microstructural evolution and high-temperature mechanical properties of GWZ alloys were revealed and discussed. With AlN/Al particles added into the as-cast alloys, the Mg 3 RE phase was transformed into lamellar LPSO phase, while the content of Al 2 RE and LPSO phase increased. Since the Al 2 RE and AlN were effective nucleation sites for α-Mg, the grain size of AlN/Al-GWZ composites was reduced obviously from 126.1 to 39.8 μm. After homogenization, due to the coherent lattice matching relationships between 18R-LPSO phase and Al 2 RE or AlN particles, the 18R-LPSO phase nucleated on the Al 2 RE and AlN particles. After ageing treatment, the 2AlN/Al-GWZ composite showed the optimum mechanical properties at 250 °C, with the yield strength, ultimate tensile strength and elongation of 247.1 MPa, 265.5 MPa and 4.0%, respectively. The strengthening effect was primarily originated from the AlN particles, Al 2 RE and LPSO phases in the 2AlN/Al-GWZ composite. Besides, the composites can achieve the enhancement of high-temperature strength without the sacrifice of plasticity due to the coordinated deformation of AlN particles as well as the refinement of grains.
BibTeX
@article{xie2024increasing,
author = {Wenlong Xie and Yuyang Gao and Hong Yang and Xin Guo and Jiwei Zhao and Jianxin Zhou and Xiaojun Luo and Jiangfeng Song and Guangsheng Huang and Bin Jiang and Fusheng Pan},
title = {{Increasing the high-temperature mechanical properties of Mg-Gd-Y-Zn alloys by adding AlN/Al particles}},
journal = {Journal of Materials Research and Technology},
year = {2024},
doi = {10.1016/j.jmrt.2024.09.177},
}Loading related content...