Improvement of Distance Measurement Based on Dispersive Interferometry Using Femtosecond Optical Frequency Comb

Qiong Niu, Mingyu Song, Jihui Zheng, Linhua Jia, Junchen Liu, Lingman Ni, Ju Nian, Xingrui Cheng, Fumin Zhang, Xinghua Qu

TL;DR

This paper tackles the challenge of achieving high-precision, long-distance measurements using dispersive interferometry (DPI) with femtosecond optical frequency combs (OFCs). By introducing a novel mathematical model for OFCs and employing the Lomb-Scargle algorithm for data processing, the researchers significantly improved measurement accuracy, achieving an error of less than 12 µm over a 70-meter range.

What Problem Does This Paper Address?

Accurate and long-range distance measurement is crucial for various scientific and industrial applications, from fundamental physics research to advanced manufacturing. Optical frequency combs (OFCs) have emerged as powerful tools for this purpose, enabling high-precision measurements. Dispersive interferometry (DPI) is one such technique that leverages OFCs. However, traditional DPI methods, particularly those using mode-locked OFCs, suffer from measurement errors. These errors primarily stem from the non-uniform sampling intervals inherent in spectrometer data acquisition, which lead to inaccuracies when processed with standard Fast Fourier Transform (FFT) algorithms. This paper aims to overcome these limitations by developing a more robust mathematical model for OFCs and implementing a more suitable data processing algorithm.

Methods

The researchers first developed a simplified mathematical model for OFCs, unifying the treatment for combs with an odd or even number of frequency components. This model allows for a better understanding and simulation of OFC properties. The core innovation lies in the application of the Lomb-Scargle algorithm for processing the interference signals. Unlike the FFT, the Lomb-Scargle algorithm is specifically designed to handle non-uniform sampling, which is a critical issue with spectrometer data. By adapting this algorithm, the paper addresses the errors introduced by the spectrometer's sampling limitations. The experimental setup involved a mode-locked OFC and a dispersive interferometer, with measurements taken at various points along an 80-meter underground optical guide rail.

Datasets

Not discussed in the paper. The experiments involved measurements taken at different points along an optical guide rail, serving as the "dataset" for evaluation.

Key Insights and Ideas

  • Unified OFC Model: Developing a single mathematical model for OFCs, regardless of the number of frequency components, simplifies analysis and simulation.
  • Lomb-Scargle for Non-Uniform Sampling: Recognizing that standard FFT struggles with non-uniform data from spectrometers, the paper highlights the power of the Lomb-Scargle algorithm for accurate spectral analysis in such scenarios. This is a key takeaway for anyone dealing with real-world spectral data.
  • Error Reduction in DPI: The study demonstrates that by switching from FFT to Lomb-Scargle, the errors associated with non-uniform sampling in DPI can be significantly mitigated.
  • High-Precision Long-Distance Measurement: The paper validates the effectiveness of their approach by achieving impressive accuracy over a substantial distance, pushing the boundaries of what's possible with current DPI techniques.

Key Results

The experimental verification demonstrated that the Lomb-Scargle algorithm effectively reduces errors caused by spectrometer resolution and non-uniform sampling. The system achieved a distance resolution of approximately 10 µm and a non-ambiguity range of about 0.6 m. Crucially, the absolute distance measurement error was found to be less than 12 µm over a range of 70 meters.

Limitations and Future Work

The paper acknowledges that the non-ambiguity range of the current system is about 0.6 m. Future work will focus on combining chip-scale soliton microcombs (SMCs) with the Lomb-Scargle algorithm to eliminate dead zones in DPI. This advancement aims to extend the measurement range to arbitrary distances and open up applications in ultra-precision semiconductor manufacturing and large aircraft processing.

Summary updated

Abstract

Since the dispersive interferometry (DPI) based on optical frequency combs (OFCs) was proposed, it has been widely used in absolute distance measurements with long-distance and high precision. However, it has a serious problem for the traditional DPI based on the mode-locked OFC. The error of measurements caused by using the fast Fourier transform (FFT) algorithm to process signals cannot be overcome, which is due to the non-uniform sampling intervals in the frequency domain of spectrometers. Therefore, in this paper, we propose a new mathematical model with a simple form of OFC to simulate and analyze various properties of the OFC and the principle of DPI. Moreover, we carry out an experimental verification, in which we adopt the Lomb–Scargle algorithm to improve the accuracy of measurements of DPI. The results show that the Lomb–Scargle algorithm can effectively reduce the error caused by the resolution, and the error of absolute distance measurement is less than 12 μm in the distance of 70 m based on the mode-locked OFC.
BibTeX
@inproceedings{niu2022improvement,
  author = {Qiong Niu and Mingyu Song and Jihui Zheng and Linhua Jia and Junchen Liu and Lingman Ni and Ju Nian and Xingrui Cheng and Fumin Zhang and Xinghua Qu},
  title = {{Improvement of Distance Measurement Based on Dispersive Interferometry Using Femtosecond Optical Frequency Comb}},
  booktitle = {Sensors},
  year = {2022},
  url = {https://openreview.net/forum?id=Tfw0pTLvO0},
}
Figure