Impact of Imaging Protocols on Convolutional Neural Network-Based Pressure Injury Detection

Miriam Asare-Baiden, Sharon Eve Sonenblum, Kathleen S. Jordan, Glory Tomi John, Andrew Chung, Judy Wawira Gichoya, Vicki Hertzberg, Joyce C. HoResearch Square 2025 · DOI

TL;DR

This study demonstrates that thermal imaging is a far more robust and reliable modality than standard optical photography for detecting early-stage pressure injuries across diverse skin tones. While optical-based deep learning models are highly sensitive to changes in lighting and camera distance, thermal-based models maintain >90% accuracy regardless of the imaging protocol, providing a critical foundation for equitable, AI-driven clinical diagnostics.

What Problem Does This Paper Address?

Pressure injuries (PIs)—commonly known as bedsores—are a multi-billion dollar healthcare challenge that can lead to fatal complications like sepsis. Early detection is the "holy grail" of PI care, as it allows for intervention before the skin actually breaks.

However, current gold-standard assessments rely on visual inspection for redness (erythema), which is notoriously difficult to detect in patients with darker skin tones. While thermal imaging (which detects temperature changes preceding visible skin damage) shows promise, its clinical utility is hindered by a lack of standardization. We don't know if a model trained on a photo taken from 30cm away under a ring light will still work if a nurse takes a photo from 50cm away in a dimly lit room. This paper investigates whether these "imaging protocols" and variations in patient skin tone break the deep learning models we hope to deploy.

Methods

The researchers employed a factorial study design to systematically test 12 different imaging protocols. These protocols varied across:

  • Lighting: Ambient room light vs. ring light.
  • Distance: 35 cm vs. 50 cm.
  • Posture: Three different leg positions (forward, stacked, or backward).
  • Camera Type: FLIR E8XT vs. FLIR ONE Pro.

To simulate the early physiological changes of a PI (which often involve localized cooling or warmth), they induced localized cooling on the lower backs of 35 healthy participants using a cooled stone cylinder.

They then trained and evaluated three popular Convolutional Neural Network (CNN) architectures—MobileNetV2, InceptionNetV3, and ResNet50—using transfer learning. To understand why the models made certain decisions, they used Grad-CAM (Gradient-weighted Class Activation Mapping) to visualize which parts of the image the AI was focusing on.

Datasets

The study produced a dataset of 1,680 images (840 control, 840 cooling).

  • Participants: 35 healthy adults.
  • Diversity: Participants were categorized using the Monk Skin Tone (MST) scale, a 10-point scale designed to be more inclusive than the traditional Fitzpatrick scale. The recruitment specifically targeted a high representation of MST levels 6–10 (darker skin tones) to ensure the models were evaluated for health equity.

Key Insights and Ideas

  • Thermal is Modality-Superior, Not Just Architecture-Dependent: The performance gap wasn't about which AI model was used; it was about the data. Thermal imaging provided a clear signal that was "protocol-agnostic," whereas optical imaging was "protocol-dependent."
  • The "Rewarming" Trap: Grad-CAM analysis revealed a fascinating failure mode. In thermal images that were misclassified, the model often focused on "warm spots" created as the skin naturally rewarmed after the cooling stimulus. This suggests that static, single-image labels might be insufficient for thermal AI; the models might need to account for temporal changes (video or image sequences).
  • Solving the Equity Gap: One of the most significant findings is that thermal model performance remained consistently high across all skin tones. This suggests that thermal-based AI could bypass the inherent visual biases found in optical dermatology, where models often underperform on darker skin.

Key Results

  • Thermal Accuracy: Consistently high, ranging from 98.6% to 99.6% across the three architectures. It was remarkably stable regardless of lighting, distance, or posture.
  • Optical Accuracy: Significantly lower and more volatile, ranging from 52.0% to 54.7% (barely better than a coin flip).
  • Protocol Sensitivity: For optical imaging, the number of misclassifications varied significantly depending on the protocol (e.g., stacked knees with a ring light performed worst). For thermal imaging, the error rate was negligible across almost all configurations.
  • Statistical Significance: Paired t-tests confirmed the superiority of thermal imaging with exceptionally large effect sizes (Cohen’s d ranging from -14.71 to -27.67).

Limitations and Future Work

The primary limitation is the use of healthy volunteers and simulated cooling. A real-world pressure injury involves complex biological processes beyond simple temperature shifts. Furthermore, while the MST scale was used, the sample sizes for the very lightest (MST 1-5) and very darkest (MST 8-10) groups were relatively small compared to the MST 6-7 group.

Future research should focus on:

  1. Clinical Validation: Testing these models on actual patients in hospital settings with developing PIs.
  2. Dynamic Labeling: Moving beyond "cool vs. control" labels to incorporate the rewarming rate and spatial distribution of heat.
  3. Hardware Integration: Exploring how these models perform on lower-cost, smartphone-attached thermal sensors to enable widespread bedside use.

Summary updated

Abstract

Pressure injuries remain a critical concern in clinical care, with early detection essential for preventing progression and reducing morbidity. While thermal imaging has demonstrated promise for early pressure injury detection, the impact of imaging protocol variations and patient skin tone on detection accuracy remains underexplored. In this study, we systematically assess how variations in lighting, camera distance, patient positioning, and camera type influence deep learning model performance for early pressure injury detection using both optical and thermal images. A total of 1680 images were collected from 35 healthy adults across diverse skin tones using a factorial design of 12 imaging protocols in a controlled environment where localized cooling was induced to simulate temperature changes. Three deep learning model architectures (MobileNetV2, InceptionNetV3, ResNet50) were evaluated to assess protocol robustness. Thermal imaging significantly outperformed optical imaging, achieving >90% accuracy across models with minimal sensitivity to protocol variations. In contrast, optical performance varied substantially across protocols (32-55% accuracy), demonstrating significant protocol dependency that could impact clinical implementation. Cross-subject error analysis revealed that models focused on both the cool and warm regions in the images, suggesting that current static labeling approaches may be inadequate for dynamic thermal imaging applications. These findings establish the robustness of deep learning models trained on thermal imaging data across diverse skin tones and imaging conditions, providing a critical foundation for future clinical validation in pressure injury detection applications.
BibTeX
@inproceedings{asarebaiden2025impact,
  author = {Miriam Asare-Baiden and Sharon Eve Sonenblum and Kathleen S. Jordan and Glory Tomi John and Andrew Chung and Judy Wawira Gichoya and Vicki Hertzberg and Joyce C. Ho},
  title = {{Impact of Imaging Protocols on Convolutional Neural Network-Based Pressure Injury Detection}},
  booktitle = {Research Square},
  year = {2025},
  doi = {10.21203/rs.3.rs-7263214/v1},
}
Figure