Hypernetwork Dismantling via Deep Reinforcement Learning

Dengcheng Yan, Wenxin Xie, Yiwen Zhang, Qiang He, Yun Yang

Abstract

Network dismantling aims to degrade the connectivity of a network by removing an optimal set of nodes. It has been widely adopted in many real-world applications such as epidemic control and rumor containment. However, conventional methods usually focus on simple network modeling with only pairwise interactions, while group-wise interactions modeled by hypernetwork are ubiquitous and critical. In this work, we formulate the hypernetwork dismantling problem as a node sequence decision problem and propose a deep reinforcement learning (DRL)-based hypernetwork dismantling framework. Besides, we design a novel inductive hypernetwork embedding method to ensure the transferability to various real-world hypernetworks. Our framework first generates small-scale synthetic hypernetworks and embeds the nodes and hypernetworks into a low dimensional vector space to represent the action and state space in DRL, respectively. Then trial-and-error dismantling tasks are conducted by an agent on these synthetic hypernetworks, and the dismantling strategy is continuously optimized. Finally, the well-optimized strategy is applied to real-world hypernetwork dismantling tasks. Experimental results on five real-world hypernetworks demonstrate the effectiveness of our proposed framework.

Introduction

Network dismantling is the strategic removal of nodes to minimize the connectivity of a system, a vital tool for stopping the spread of diseases or containing rumors. Traditionally, researchers have modeled these systems as simple graphs where edges only connect two nodes. However, real-world interactions are often group-wise: a single party can spread a virus to dozens of people simultaneously, or a research paper can have ten co-authors. These are better modeled as hypernetworks, where "hyperedges" can contain any number of nodes.

Standard dismantling tools often fail in these contexts because they either ignore group dynamics or simplify the hypernetwork into a standard graph (a "2-section graph"). As shown in Figure 1, this simplification introduces significant noise by creating "cliques" that suggest connections which do not exist in the original group-wise context, leading to inefficient dismantling strategies. Finding the optimal set of nodes to remove is an NP-hard problem, necessitating a learning-based approach.

Comparison of dismantling strategies on a hypernetwork versus its simplified 2-section graph representation.

Methodology: The HITTER Framework

The authors introduce HITTER (Hypernetwork dismantling via InducTive hyperneTwork Embedding and deep Reinforcement learning). The framework consists of three main stages:

1. Synthetic Generation

Since training Deep Reinforcement Learning (DRL) requires massive amounts of data, the agent first practices on small-scale synthetic hypernetworks generated using the "HyperFF" model. This allows the model to learn generalizable strategies before being applied to real-world data.

2. HyperSAGE (The Embedding Layer)

To help the DRL agent interpret the network structure, the authors designed HyperSAGE. Unlike standard transductive embeddings that only work on a specific graph, HyperSAGE is inductive. It uses a two-level aggregation process (Node-to-Hyperedge and Hyperedge-to-Node) to learn general structural patterns. This is crucial because the network structure changes every time a node is removed during the dismantling process. Figure 6 illustrates the relationship between a hypernetwork and its incidence matrix, which serves as the basis for these embeddings.

Representation of a hypernetwork and its corresponding incidence matrix used for embedding.

3. Deep Q-Learning

The dismantling process is framed as a sequential decision problem. At each step, the agent observes the current state of the residual hypernetwork and chooses a node to remove. The "reward" is based on the reduction in connectivity, specifically the size of the Giant Connected Component (GCC).

Experimental Evaluation

The model was evaluated on five diverse real-world hypernetworks, including co-authorship/citation networks (Cora, Citeseer, Pubmed, MAG) and medical/chemical networks (NDC).

Key Results

HITTER consistently outperformed state-of-the-art baselines, including traditional centrality measures like Collective Influence and other DRL-based graph solvers like FINDER.

  • Efficiency: On the Cora and Citeseer datasets, removing just 10% of the nodes identified by HITTER was enough to significantly degrade connectivity. In visualization tests, HITTER reduced connectivity to 36.7% in the first step, while traditional adaptive degree methods only reached 60.0%.
  • Robustness: Even on dense networks like NDC and Pubmed, HITTER achieved the lowest Accumulated Normalized Connectivity (ANC) scores.
  • Epidemic Simulation: In a case study using an SIR model on a real-world contact dataset, HITTER-based immunization resulted in the lowest final infection rates.

Discussion and Conclusion

A key insight from this work is that HITTER learns to prioritize "bridge" nodes between different parts of the network rather than just nodes in the densest clusters. However, densely connected hypernetworks like Pubmed remain a challenge because structurally similar nodes are harder for the embedding layer to distinguish. Future work will explore hypernetwork sparsity methods to improve discrimination in dense clusters and enhance the robustness of embeddings for larger global structures.

Summary updated

Abstract

Network dismantling aims to degrade the connectivity of a network by removing an optimal set of nodes. It has been widely adopted in many real-world applications such as epidemic control and rumor containment. However, conventional methods usually focus on simple network modeling with only pairwise interactions, while group-wise interactions modeled by hypernetwork are ubiquitous and critical. In this work, we formulate the hypernetwork dismantling problem as a node sequence decision problem and propose a deep reinforcement learning (DRL)-based hypernetwork dismantling framework. Besides, we design a novel inductive hypernetwork embedding method to ensure the transferability to various real-world hypernetworks. Our framework first generates small-scale synthetic hypernetworks and embeds the nodes and hypernetworks into a low dimensional vector space to represent the action and state space in DRL, respectively. Then trial-and-error dismantling tasks are conducted by an agent on these synthetic hypernetworks, and the dismantling strategy is continuously optimized. Finally, the well-optimized strategy is applied to real-world hypernetwork dismantling tasks. Experimental results on five real-world hypernetworks demonstrate the effectiveness of our proposed framework.
BibTeX
@article{yan2022hypernetwork,
  author = {Dengcheng Yan and Wenxin Xie and Yiwen Zhang and Qiang He and Yun Yang},
  title = {{Hypernetwork Dismantling via Deep Reinforcement Learning}},
  journal = {IEEE Trans. Network Science \& Engineering},
  year = {2022},
  url = {https://openreview.net/forum?id=YFIfl6oG7V},
}
Figure