Hydrothermal Synthesis and Electrochemical Properties of SnS2/N Anode Material for Lithium-Ion Batteries

Wei Liu, Longhua Zhang, Jingbo Zhang, Bo Liu, Yu He, Shipin Wang, Hewei LiuBatteries 2026 · DOI

TL;DR

Researchers have developed a novel nitrogen-doped tin disulfide (SnS2) nanosheet material synthesized via a simple hydrothermal method. This N-doped SnS2 exhibits significantly improved cycling stability and capacity retention for lithium-ion battery anodes, addressing the critical issue of volume expansion that plagues traditional SnS2.

What Problem Does This Paper Address?

Lithium-ion batteries (LIBs) are crucial for modern energy storage, but their performance is limited by anode materials. While graphite is the current standard, its theoretical capacity is insufficient for future demands. Tin disulfide (SnS2) offers a much higher theoretical capacity (645 mAh/g) and is abundant, making it an attractive alternative. However, SnS2 suffers from substantial volume expansion during charging and discharging, leading to rapid capacity decay and poor long-term cycling stability. This paper aims to overcome these limitations by developing a modified SnS2 material that can withstand the stresses of repeated cycling while retaining its high capacity.

Methods

The core of this research lies in the hydrothermal synthesis of nitrogen-doped SnS2 (SnS2/N) nanosheets. This one-step process involves reacting sodium stannate, thiourea (as a sulfur source), and varying amounts of melamine (as the nitrogen source) under specific temperature and pressure conditions. The use of melamine is key to introducing nitrogen into the SnS2 lattice.

To characterize the synthesized materials, the researchers employed a suite of standard techniques:

  • X-ray Diffraction (XRD): To determine the crystal structure and phase purity.
  • X-ray Photoelectron Spectroscopy (XPS): To analyze surface elemental composition and chemical states, confirming nitrogen doping.
  • Raman Spectroscopy: To investigate vibrational modes and structural changes.
  • Field-Emission Scanning Electron Microscopy (FESEM) and High-Resolution Transmission Electron Microscopy (HRTEM): To examine the morphology, microstructure, and lattice structure.
  • Energy-Dispersive Spectroscopy (EDS): To confirm elemental composition and distribution.

Electrochemical performance was evaluated using:

  • Cyclic Voltammetry (CV): To study the reaction mechanisms and reversibility.
  • Galvanostatic Charge-Discharge (GCD) Tests: To measure specific capacity, cycling stability, and rate performance.
  • Electrochemical Impedance Spectroscopy (EIS): To probe charge transfer resistance and ion diffusion kinetics.

Finally, Density Functional Theory (DFT) calculations were used to theoretically investigate the structural stability, electronic properties, and the impact of nitrogen doping on the band structure and conductivity of SnS2.

Datasets

Not discussed in the paper. The study focuses on the synthesis and characterization of a novel material and its electrochemical performance, rather than training or evaluating a model on a specific dataset.

Key Insights and Ideas

  • Nitrogen doping is a game-changer for SnS2 anodes: The introduction of nitrogen atoms into the SnS2 lattice significantly mitigates the volume expansion issue, leading to remarkable improvements in cycling stability and capacity retention.
  • Hydrothermal synthesis with melamine is effective: This facile, one-step method allows for the controlled incorporation of nitrogen and the formation of well-dispersed nanosheets, avoiding the use of corrosive chloride precursors.
  • N-doping enhances conductivity and stability: DFT calculations reveal that nitrogen doping narrows the bandgap of SnS2, improving its electrical conductivity. EIS measurements confirm reduced charge transfer resistance and enhanced lithium-ion diffusion in the N-doped material.
  • Formation of a robust SEI layer: The nitrogen doping facilitates the formation of a stable solid electrolyte interphase (SEI) film, which is crucial for protecting the electrode material during cycling.
  • Synergistic effects at play: The improved performance is attributed to a combination of factors: reduced volume expansion, enhanced electronic conductivity, improved ion diffusion, and a stable SEI layer, all stemming from nitrogen incorporation.

Key Results

  • High Initial Capacity: The SnS2/N composite delivered an initial specific discharge capacity of 500.8 mAh/g at a current density of 0.5 A/g.
  • Exceptional Cycling Stability: After 500 cycles at 0.5 A/g, the material retained 481.66 mAh/g, corresponding to an impressive capacity retention of 96.17%. This is a significant improvement over pristine SnS2, which typically suffers from rapid capacity fade.
  • Improved Rate Capability: The N-doped material showed enhanced capacity retention across a range of current densities (0.1–2.0 A/g) compared to pristine SnS2. For instance, at 1.0 A/g, SnS2/N maintained 418.11 mAh/g, while pristine SnS2 dropped to 284.48 mAh/g.
  • Reduced Charge Transfer Resistance: EIS data showed a substantial decrease in charge transfer resistance (Rct) for the SnS2/N electrode (75.55 Ω before cycling, 44.48 Ω after cycling) compared to pristine SnS2 (171.42 Ω before cycling).
  • Enhanced Lithium-Ion Diffusion: The calculated lithium-ion diffusion coefficient (DLi+) for SnS2/N was approximately 5.22 times higher than that of pristine SnS2.
  • DFT-predicted bandgap reduction: The bandgap of pristine SnS2 was calculated to be 1.58 eV, while for N-doped SnS2, it was reduced to 0.65 eV, indicating improved conductivity.

Limitations and Future Work

  • Low Nitrogen Concentration: XPS analysis indicated a low Sn-N concentration (0.71 at%), suggesting that while effective, the doping level could potentially be further optimized.
  • Further Optimization of Doping: While 0.2 g of melamine was found to be optimal for balancing doping and morphology, further fine-tuning of the nitrogen source amount and synthesis parameters could potentially yield even better results.
  • Scale-up Potential: The study successfully demonstrates a facile one-step hydrothermal synthesis. Future work could focus on scaling up this process for industrial applications, addressing any challenges associated with large-scale production.
  • Exploration of Other Heteroatoms: The success of nitrogen doping suggests that exploring other heteroatom dopants or combinations thereof could lead to further advancements in SnS2-based anode materials.
  • In-depth understanding of SEI formation: While the formation of a robust SEI is highlighted, a more detailed investigation into its composition and evolution during cycling could provide deeper insights.

Summary updated

Abstract

Although tin disulfide (SnS2) possesses a theoretical specific capacity (645 mAh g−1) significantly superior to that of commercial graphite, along with the merits of Earth abundance and cost-effectiveness, its commercial application as an anode material for lithium-ion batteries (LIBs) is severely hindered by substantial volume expansion during cycling. Herein, N-doped SnS2 composites featuring a stacked hexagonal nanosheet architecture were synthesized via a facile one-step hydrothermal strategy. The incorporation of nitrogen significantly bolsters the long-term cycling stability of the electrode during charge/discharge processes. Electrochemical tests results reveal that the composite delivers an initial specific capacity of 500.8 mAh g−1 at a current density of 0.5 A g−1. Following 10 stabilization cycles, the capacity is recorded at 394.9 mAh g−1, and notably, it increases to 481.66 mAh g−1 after 500 cycles, corresponding to a high capacity retention of 96.17%. This superior performance is attributed to the introduced nitrogen, which provides abundant active sites and facilitates the formation of a robust solid electrolyte interphase (SEI) film. Furthermore, density functional theory (DFT) calculations demonstrate that N-doping narrows the band gap of SnS2, thereby improving electrical conductivity and electron transport efficiency.
BibTeX
@inproceedings{liu2026hydrothermal,
  author = {Wei Liu and Longhua Zhang and Jingbo Zhang and Bo Liu and Yu He and Shipin Wang and Hewei Liu},
  title = {{Hydrothermal Synthesis and Electrochemical Properties of SnS2/N Anode Material for Lithium-Ion Batteries}},
  booktitle = {Batteries},
  year = {2026},
  doi = {10.3390/batteries12030091},
}
Figure