Hydrogen Adsorbents in the Vacuum Layer of Liquid Hydrogen Containers: Materials and Applications

Meng Yu, Yang Wu, Jiake Wu, Yong-Xiang Zhu, Xin Yu, Jiang LongHydrogen 2025 · DOI

TL;DR

This review delves into the critical role of hydrogen adsorbents in maintaining the vacuum insulation of liquid hydrogen (LH) storage tanks. By summarizing existing materials, testing methods, and applications, it highlights how these adsorbents are essential for preventing thermal failure, extending tank lifespan, and ensuring the safe and efficient transport of this vital clean energy carrier.

What Problem Does This Paper Address?

The safe and efficient transport and storage of liquid hydrogen (LH) are major hurdles for its widespread adoption as a clean energy source. LH storage tanks rely heavily on high vacuum multilayer insulation (HVMLI) to maintain cryogenic temperatures. However, this insulation degrades over time due to residual gases (primarily hydrogen) that leak into or outgas from the tank's structure. This gas accumulation compromises the vacuum, leading to increased heat ingress, accelerated thermal failure, reduced tank lifespan, and heightened safety risks. Adsorption is identified as the most effective strategy to combat this issue, but a comprehensive understanding of the materials, their performance, and application challenges is needed. This paper aims to bridge that gap by reviewing the current state of hydrogen adsorbents for LH tanks.

Methods

This paper is a comprehensive review, not an experimental study. It synthesizes information from existing literature to:

  • Summarize adsorbent materials: Categorizing them into cryogenic adsorbents (physical adsorption) and ambient-temperature adsorbents (chemical or physiochemical adsorption), including metal oxides, zeolite molecular sieves, and non-volatile getters (NEGs).
  • Review adsorption mechanisms: Explaining how different materials capture hydrogen.
  • Detail experimental testing methods: Focusing on the static constant-volume method as the most suitable for cryogenic and vacuum environments, and discussing its variations.
  • Analyze applications: Examining how these adsorbents are integrated into LH storage tanks and the challenges they face.
  • Propose research directions: Identifying areas for future development of novel adsorbents and integrated systems.

Datasets

Not discussed in the paper. This is a review article that synthesizes existing research rather than presenting new experimental data.

Key Insights and Ideas

  • Hydrogen is the primary culprit: While leaks can introduce various gases, hydrogen itself is the most significant residual gas that degrades vacuum insulation in LH tanks, especially at cryogenic temperatures.
  • Temperature is a critical factor: Cryogenic adsorbents perform well at ~20 K but lose significant capacity as temperatures rise, necessitating the use of ambient-temperature adsorbents for broader effectiveness, especially during LH refueling or discharge.
  • No single perfect adsorbent: Each type of adsorbent has trade-offs. Cryogenic adsorbents are cost-effective and safe but temperature-sensitive. Metal oxides offer high capacity but are expensive and pose safety risks (exothermic reactions). Silver molecular sieves are safer and cheaper but have lower capacity. NEGs are efficient but require high-temperature activation, limiting their use in cryogenic environments.
  • System integration is key: The effectiveness of adsorbents depends not only on their material properties but also on their placement, dosage, and interaction with the overall tank system.
  • Testing needs improvement: Current testing methods often use liquid nitrogen (77 K), which doesn't fully replicate LH temperatures (~20 K). Developing more accurate cryogenic testing platforms and standardized databases is crucial.

Key Results

The paper doesn't present new quantitative results but rather synthesizes findings from numerous studies. Key takeaways include:

  • Vacuum lifespan extension: Adsorbents can extend the vacuum lifespan of cryogenic gas tanks from less than a year to approximately ten years.
  • Adsorbent cost comparison: Silver molecular sieves (SMS) are significantly more cost-effective than PdO and AMG, requiring only about 29.38% of PdO's cost and 32.06% of AMG's cost for comparable performance in some applications.
  • Performance under cryogenic conditions: Cryogenic adsorbents show excellent hydrogen adsorption capacity at ~20 K.
  • Challenges in ambient temperature adsorption: While ambient-temperature adsorbents are necessary for broader temperature ranges, their capacity is generally lower than cryogenic adsorbents at low temperatures.

Limitations and Future Work

Limitations:

  • Testing temperature discrepancy: Most current adsorption performance testing is conducted at liquid nitrogen temperatures (≥77 K), which doesn't accurately reflect the ~20 K conditions of liquid hydrogen.
  • Simulation vs. Reality: Static volumetric methods, while standard, struggle to perfectly simulate tank dead volume and gas distribution, leading to potential discrepancies between experimental results and real-world applications.
  • MOF development: While MOFs show promise due to their high surface area and tunability, their adsorption mechanisms at low temperatures, cycle stability, and cost-effectiveness require further investigation.
  • Composite adsorbent optimization: The precise material ratios and processing techniques for composite adsorbents (e.g., CuO with zeolites) are still being optimized, and long-term operational data is scarce.

Future Work:

  • Novel adsorbent materials: Research should focus on developing efficient and cost-effective adsorbents for cryogenic vacuum tanks, including composite adsorbents, polymers, polyacetylenes, MOFs, and carbon nanotubes.
  • Standardized testing: Establishing unified adsorption testing standards and developing experimental platforms based on cryogenic refrigeration systems are essential for creating systematic databases for performance evaluation.
  • High-pressure safety: Investigating hydrogen adsorbents under high-pressure conditions following LH leakage is crucial for guiding the safe design of LH storage and transportation vessels.

Summary updated

Abstract

Hydrogen serves as a key clean-energy carrier, with the main hurdles lying in safe, efficient transport and storage (gas or liquid) and in end-use energy conversion. Liquid hydrogen (LH), as a high-density method of storage and transportation, presents cryogenic insulation as its key technical issues. In LH storage tanks, the performance of high vacuum multilayer insulation (HVMLI) will decline due to hydrogen release and leakage from the microscopic pores of steel, which significantly destroy the vacuum layer. The accumulation of residual gases will accelerate thermal failure, shorten the service life of storage tanks and increase safety risks. Adsorption is the most effective strategy for removing residual gases. This review aims to elucidate materials, methods, and design approaches related to hydrogen storage. First, it summarizes adsorbents used in liquid hydrogen storage tanks, including cryogenic adsorbents, metal oxides, zeolite molecular sieves, and non-volatile compounds. Second, it explores experimental testing methods and applications of hydrogen adsorbents in storage tanks, analyzing key challenges faced in practical applications and corresponding countermeasures. Finally, it proposes research prospects for exploring novel adsorbents and developing integrated systems.
BibTeX
@inproceedings{yu2025hydrogen,
  author = {Meng Yu and Yang Wu and Jiake Wu and Yong-Xiang Zhu and Xin Yu and Jiang Long},
  title = {{Hydrogen Adsorbents in the Vacuum Layer of Liquid Hydrogen Containers: Materials and Applications}},
  booktitle = {Hydrogen},
  year = {2025},
  doi = {10.3390/hydrogen6040089},
}
Figure