HyDRA: A Hybrid Dual-Mode Network for Closed- and Open-Set RFFI with Optimized VMD

Hanwen Liu, Yuhe Huang, Yifeng Gong, Yanjie Zhai, Jiaxuan Lu

Introduction

Radio Frequency Fingerprint Identification (RFFI) has emerged as a robust, non-cryptographic solution for device authentication in wireless networks. By exploiting microscopic hardware-induced signal distortions—unique to each device due to manufacturing tolerances—RFFI provides a physical-layer security mechanism that is significantly harder to spoof than traditional MAC addresses or cryptographic keys. However, the practical deployment of RFFI faces three critical challenges: the high computational cost of high-precision models, the latency introduced by signal preprocessing, and the "closed-set" limitation, where models fail to identify unauthorized devices not present during training.

This paper introduces HyDRA (Hybrid Dual-mode RF Architecture), a novel framework designed to address these hurdles. HyDRA integrates an optimized Variational Mode Decomposition (VMD) preprocessing step with a flexible dual-mode architecture that balances precision and efficiency, while incorporating a robust framework for open-set device recognition.

System Architecture

Optimized "Lossless" VMD

Variational Mode Decomposition (VMD) is traditionally used to denoise and decompose complex signals into constituent modes. However, the standard iterative implementation (ADMM) is computationally intensive and prone to reconstruction errors that can obscure subtle hardware fingerprints.

HyDRA introduces a "lossless" VMD approach. By leveraging the fact that digitally modulated signals have known spectral peaks, the authors derived a closed-form solution that fixes center frequencies to multiples of the signal's fundamental frequency. This transformation converts VMD from a heavy optimization problem into a deterministic preprocessing step, achieving a speedup of 73.6% to 95.9% compared to traditional methods while eliminating reconstruction artifacts.

The HyDRA Dual-Mode Encoder

The core of HyDRA is a hybrid architecture that allows for deployment flexibility through two distinct encoding paths:

  1. Convolutional Feature Refinement Extractor (CFRE): A CNN-based front-end that utilizes split-path residual blocks to decouple and refine magnitude and phase features, preparing the signal for high-level encoding.
  2. Transformer Dynamic Sequence Encoder (TDSE): Designed for maximum precision, the TDSE uses multi-head self-attention to capture global dependencies within the signal. It is optimized for high-SNR environments where accuracy is the primary requirement.
  3. Mamba Linear Flow Encoder (MLFE): Based on Selective State Space Models (SSMs), the MLFE offers linear complexity relative to sequence length. This mode provides a high-performance alternative for resource-constrained edge devices, maintaining near-Transformer levels of accuracy with significantly lower memory and computational overhead.

Open-Set Classification Framework

In real-world security scenarios, an RFFI system must distinguish between known "legal" devices and unknown "illegal" intruders. HyDRA addresses this through a threshold-based open-set framework. By applying a temperature parameter ($T$) to the softmax output, the model can "sharpen" its probability distribution. This allows the system to set a reliable confidence threshold; signals that result in a diffuse probability across known classes are flagged as unauthorized, even if they were never seen during the training phase.

Experimental Results

Classification Performance

HyDRA was evaluated using the WiSig dataset, including the SingleDay (28 transmitters) and ManyTx (150 transmitters) subsets. The results demonstrate state-of-the-art (SOTA) performance:

  • Closed-Set Accuracy: The TDSE model achieved 99.81% accuracy on the SingleDay dataset and 90.71% on the more challenging ManyTx dataset, which spans multiple days and receivers.
  • Mamba Efficiency: The MLFE (Mamba) variant achieved 99.71% accuracy, nearly matching the Transformer while offering superior scaling for long sequences.
  • Open-Set Robustness: The system achieved a peak accuracy of 94.67% in identifying unauthorized devices, demonstrating its viability as a security gatekeeper.

Hardware Deployment

To test real-world feasibility, HyDRA was deployed on an NVIDIA Jetson Xavier NX. The TDSE model achieved an inference time of approximately 8.4ms per signal. While the Mamba-based MLFE showed high theoretical efficiency, the authors noted that current software library limitations on edge hardware require further kernel optimization to fully realize Mamba's speed advantages in production environments.

Conclusion

HyDRA represents a significant step forward in making RFFI practical for real-time applications. By combining a mathematically optimized preprocessing stage with a flexible, dual-mode deep learning architecture, it successfully balances the competing demands of accuracy, speed, and security. Future work will focus on adaptive thresholding techniques and further optimizing State Space Model kernels for edge-specific hardware to enhance the deployment of the Mamba-based encoder.

Summary updated

Abstract

Device recognition is vital for security in wireless communication systems, particularly for applications like access control. Radio Frequency Fingerprint Identification (RFFI) offers a non-cryptographic solution by exploiting hardware-induced signal distortions. This paper proposes HyDRA, a Hybrid Dual-mode RF Architecture that integrates an optimized Variational Mode Decomposition (VMD) with a novel architecture based on the fusion of Convolutional Neural Networks (CNNs), Transformers, and Mamba components, designed to support both closed-set and open-set classification tasks. The optimized VMD enhances preprocessing efficiency and classification accuracy by fixing center frequencies and using closed-form solutions. HyDRA employs the Transformer Dynamic Sequence Encoder (TDSE) for global dependency modeling and the Mamba Linear Flow Encoder (MLFE) for linear-complexity processing, adapting to varying conditions. Evaluation on public datasets demonstrates state-of-the-art (SOTA) accuracy in closed-set scenarios and robust performance in our proposed open-set classification method, effectively identifying unauthorized devices. Deployed on NVIDIA Jetson Xavier NX, HyDRA achieves millisecond-level inference speed with low power consumption, providing a practical solution for real-time wireless authentication in real-world environments.
BibTeX
@article{liu2025hydra,
  author = {Hanwen Liu and Yuhe Huang and Yifeng Gong and Yanjie Zhai and Jiaxuan Lu},
  title = {{HyDRA: A Hybrid Dual-Mode Network for Closed- and Open-Set RFFI with Optimized VMD}},
  journal = {IEEE Internet of Things Journal},
  year = {2025},
  doi = {10.1109/jiot.2025.3621243},
}
Figure