TL;DR
This paper introduces a novel "ICPPG" system that combines contact and imaging photoplethysmography (PPG) to unobtrusively measure blood pressure (BP). By measuring pulse transit time (PTT) between the face and hand, the system demonstrates feasibility for continuous, cuff-less BP monitoring, paving the way for next-generation wearable health devices.
What Problem Does This Paper Address?
Accurate and continuous blood pressure (BP) monitoring is crucial for managing cardiovascular health, but current gold-standard methods like catheterization are invasive, and conventional non-invasive techniques (auscultation, oscillometry) are often cumbersome, disruptive, and require manual intervention. The need for ultra-convenient, unobtrusive, and portable BP measurement solutions is paramount for widespread ambulatory monitoring and early detection of conditions like hypertension. Pulse transit time (PTT), the time it takes for an arterial pulse wave to travel between two points, has shown an inverse correlation with BP. However, existing PTT measurement methods often rely on multiple contact PPG sensors or require specific subject positioning, limiting their unobtrusiveness and practicality for everyday use.
Methods
The core innovation is the ICPPG (Imaging and Contact Photoplethysmography) system. This hybrid approach combines two PPG sensing modalities:
- Imaging PPG (iPPG): Utilizes a standard camera (e.g., from a smartwatch) to capture subtle color changes on the skin (specifically the cheek) caused by blood volume fluctuations. To overcome challenges with head movement, they implemented a template-based tracking ROI algorithm that adaptively identifies and follows the region of interest (ROI) across video frames, ensuring more stable signal extraction.
- Contact PPG (cPPG): Employs a traditional, low-cost optical sensor placed in direct contact with the skin (e.g., on the fingertip).
The system measures PTT by calculating the temporal difference between characteristic points (onsets) in the PPG waveforms acquired simultaneously from the face (iPPG) and the hand (cPPG). A morphology-based ABP beat detection algorithm is used to accurately identify these onset points for each heartbeat. To account for variations and ensure robust estimation, PTT values are averaged over 30-second episodes before and after each BP measurement.
Datasets
The study utilized a dataset of 29 healthy subjects. Data was collected during alternating relaxation and exercise sessions to capture BP variations. The paper does not introduce a new benchmark dataset but rather uses existing participants to validate their proposed ICPPG system against a conventional reference system.
Key Insights and Ideas
- Hybrid Sensing for Unobtrusiveness: Combining iPPG (camera-based, remote) with cPPG (contact) allows for PTT measurement without requiring multiple contact sensors or strict subject positioning, significantly enhancing unobtrusiveness.
- Adaptive ROI Tracking: The template-based ROI tracking algorithm is crucial for iPPG signal quality, effectively mitigating motion artifacts from slight head movements, which is a common challenge in remote PPG.
- Feasibility of Wearable Integration: The proposed ICPPG system, utilizing components like a smartwatch camera and a contact sensor, is well-suited for integration into future wearable and mobile devices.
- Inverse Relationship with BP: Consistent with prior research, the study confirms that PTT generally decreases as BP increases, although some subjects showed a positive correlation, which warrants further investigation.
Key Results
- The ICPPG system was able to reliably estimate PTT values.
- Consistency with Reference: IC-PTT showed a significant correlation with reference PTT measurements (r = 0.513 for relaxation, r = 0.421 for exercise), indicating the validity of the ICPPG system.
- BP Correlation: For most subjects, the measured PTT (both IC-PTT and Ref-PTT) showed an inverse correlation with BP variations. Specifically, IC-PTT showed a correlation coefficient of -0.4549 ± 0.5871 with SBP, -0.2258 ± 0.6524 with DBP, and -0.3690 ± 0.6194 with mean BP (mBP).
- Unobtrusiveness Advantage: The ICPPG system offers a significant advantage in unobtrusiveness compared to methods requiring multiple cPPG sensors or multiple iPPG sensors.
Limitations and Future Work
- Reference System: The "reference system" used (two cPPG sensors) is not the absolute gold standard for PTT measurement, which could introduce some limitations.
- Arterial Site Matching: The PPG signals from different arterial sites (head vs. hand) acquired by the ICPPG and reference systems might not be perfectly matched, potentially leading to calculation errors.
- Population Demographics: The dataset primarily consisted of young adults (20-30 years old). Future work should investigate the system's performance in elderly populations.
- Up-sampling Technique: The effect of the up-sampling technique used in the ABP beat detection algorithm could be further investigated and compared with other interpolation methods.
- Positive BP-PTT Correlation: The observed positive correlation between BP and PTT in some subjects needs further exploration, potentially related to differences in arterial path response to BP changes.
Summary updated