Household alternating current electricity plug-and-play quantum-dot light-emitting diodes

Jiming Wang, Cuixia Yuan, Shuming ChenNature Communications 2024 · DOI

TL;DR

Researchers have developed a novel tandem quantum-dot LED (QLED) that can be directly powered by household alternating current (AC) electricity, eliminating the need for bulky and costly AC-DC converters. By connecting these QLEDs in series, they created a "plug-and-play" lighting panel that offers high efficiency and tunable brightness, paving the way for more cost-effective and integrated solid-state lighting solutions.

What Problem Does This Paper Address?

Traditional light-emitting diodes (LEDs), including those based on quantum dots (QDs), are inherently direct current (DC) devices. This means they require a driver circuit to convert the ubiquitous household alternating current (AC) electricity into the low-voltage DC they need to operate. These driver circuits, often comprising transformers and rectifiers, add significant cost (around 17% of the total LED lamp cost), complexity, and power consumption to LED lighting systems. Furthermore, the unidirectional nature of DC current in LEDs can lead to charge accumulation and heat buildup, potentially reducing their lifespan. The challenge, therefore, is to create efficient and stable light sources that can directly interface with standard household AC power without these intermediate electronic components.

Methods

The core innovation lies in the development of a tandem QLED structure. This involves vertically stacking two individual QLEDs, a bottom (B-QLED) and a top (T-QLED), and connecting them via a transparent and conductive indium-zinc-oxide (IZO) intermediate electrode. This IZO layer is crucial as it allows the tandem device to operate in both DC and AC modes.

For AC operation, the top electrode of the T-QLED and the bottom electrode of the B-QLED are shorted to form a common electrode, while the IZO layer acts as the counter electrode. This configuration effectively connects the B-QLED and T-QLED in parallel, allowing them to be driven by AC voltage. The key advantage here is that as the AC voltage polarity reverses, the B-QLED and T-QLED are alternately turned on, ensuring continuous light emission and reducing charge accumulation.

To achieve the desired plug-and-play functionality for household AC, multiple of these tandem QLEDs are connected in series. This series connection allows the voltage to be multiplied, enabling the panel to operate directly from high-voltage AC mains (e.g., 220 V).

A critical fabrication challenge addressed was the potential for solvent-induced damage to the underlying layers during the deposition of the top ZnMgO layer. The researchers developed a dynamic spin-casting method to mitigate this issue, ensuring the integrity of the device.

Datasets

Not discussed in the paper. The study focuses on the fabrication and characterization of novel QLED devices.

Key Insights and Ideas

  • AC-Native QLEDs are Possible: The research demonstrates that QLEDs, traditionally DC devices, can be engineered to operate directly on AC power, bypassing the need for complex driver circuits.
  • Tandem Structure for AC Operation: The parallel connection of two QLEDs via an IZO layer is the key to achieving continuous light emission under AC driving, as each QLED takes turns emitting light during the positive and negative voltage cycles.
  • IZO as a Crucial Interlayer: The transparent and conductive IZO electrode is instrumental in enabling both the tandem structure and the AC operation, acting as a bridge between the two QLEDs.
  • Series Connection for High Voltage: Connecting multiple AC-QLEDs in series is an effective strategy to scale up the operating voltage, making them compatible with standard household AC mains.
  • Reduced Charge Accumulation and Improved Lifetime: By alternating the driving polarity, charge accumulation and Joule heating are significantly reduced, leading to a prolonged device lifetime compared to DC-driven QLEDs.
  • Brightness Tunability via Voltage: The brightness of the plug-and-play QLED panels can be easily tuned by adjusting the applied AC voltage, offering a simpler control mechanism than traditional DC LED drivers.

Key Results

  • High External Quantum Efficiency (EQE): The tandem QLEDs achieved an EQE of 20.09% and 21.15% during negative and positive AC cycles, respectively.
  • Improved Lifetime: The AC-driven QLEDs demonstrated a T95 lifetime (time for brightness to drop to 95% of initial value) of 216 hours at 10,000 cd m⁻², which is twice that of a DC-driven tandem QLED.
  • Household AC Compatibility: A series-connected panel of these QLEDs (PnP-QLED) was successfully driven directly by 220 V/50 Hz household AC electricity.
  • High Power Efficiency (PE): The red plug-and-play panel achieved a PE of 15.70 lm W⁻¹ under 220 V/50 Hz driving.
  • Tunable Brightness: The brightness of the PnP-QLED panel could be tuned from 1000 cd m⁻² up to 25,834 cd m⁻².
  • Cost and Complexity Reduction: The elimination of AC-DC converters and DC drivers is estimated to reduce the cost of LED lamps by approximately 17%.

Limitations and Future Work

  • Luminance Flickering: While significantly reduced, luminance flickering can still be perceived at certain AC driving conditions, particularly at higher numbers of series-connected QLEDs. The authors suggest reducing the number of series-connected units or using phase-shifted parallel connections to further mitigate this.
  • IZO Resistance: The resistance of the IZO wire in the series-connected PnP-QLEDs slightly reduces the power efficiency compared to the ideal tandem QLED. Using more conductive interconnects could improve this.
  • Fabrication Uniformity: For larger panels, achieving uniform performance across all QLEDs can be challenging due to limitations in laboratory fabrication.
  • Future Work: The authors envision these PnP-QLEDs enabling the production of cost-effective, compact, efficient, and stable solid-state light sources for various applications, directly powered by household AC electricity. Further optimization of materials and fabrication processes could lead to even higher efficiencies and better flicker suppression.

Summary updated

Abstract

As an intrinsically direct current device, quantum-dot LED cannot be directly driven by household alternating current electricity. Thus, a driver circuit is required, which increases the complexity and cost. Here, by using a transparent and conductive indium-zinc-oxide as an intermediate electrode, we develop a tandem quantum-dot LED that can be operated at both negative and positive alternating current cycles with an external quantum efficiency of 20.09% and 21.15%, respectively. Furthermore, by connecting multiple tandem devices in series, the panel can be directly driven by household alternating current electricity without the need for complicated back-end circuits. Under 220 V/50 Hz driving, the red plug-and-play panel demonstrates a power efficiency of 15.70 lm W<sup>-1</sup> and a tunable brightness of up to 25,834 cd m<sup>-2</sup>. The developed plug-and-play quantum-dot LED panel could enable the production of cost-effective, compact, efficient, and stable solid-state light sources that can be directly powered by household alternating current electricity.
BibTeX
@inproceedings{wang2024household,
  author = {Jiming Wang and Cuixia Yuan and Shuming Chen},
  title = {{Household alternating current electricity plug-and-play quantum-dot light-emitting diodes}},
  booktitle = {Nature Communications},
  year = {2024},
  doi = {10.1038/s41467-024-47891-4},
}
Figure