High-Performance Permanent Magnet Array Design by a Fast Genetic Algorithm (GA)-based Optimization for Low-Field Portable MRI

Ting-Ou Liang, Yan Hao Koh, Tie Qiu, Er‐Ping Li, Wenwei Yu, Shao Ying Huang

Abstract

A permanent magnet array (PMA) is a preferred source of magnetic field for body-part-dedicated low-field (<0.5 T) portable magnetic resonance imaging (MRI) because it has a small footprint, no power consumption, and no need for a cooling system. This paper proposes a sparse high-performance PMA based on inward-outward ring pairs using off-the-shelf magnet blocks, targeting portable head imaging. Through a fast genetic algorithm (GA)-based optimization, the proposed PMA achieves a longitudinal magnetic field with an average strength of 111.40 mT and a monotonic field pattern with inhomogeneity of 10.57 mT within a Field of View (FoV) of 20 cm in diameter and 4.5 cm in length. The system reaches a magnetic field generation efficiency of 0.88 mT/kg, the highest among sparse PMAs offering a monotonic field pattern. The proposed PMA represents a promising alternative for combining main and gradient fields in dedicated portable MRI systems.

The Challenge of Portable MRI

Traditional MRI machines are massive, expensive, and stationary, requiring specialized rooms with liquid cooling and heavy power infrastructure. Portable MRI aims to bring imaging to the bedside, ambulances, or rural clinics. However, current portable designs using Permanent Magnet Arrays (PMAs) face two major hurdles:

  1. Low Field Strength: Most portable units struggle to exceed 100 mT, which limits the signal-to-noise ratio (SNR) and image quality.
  2. Compatibility Issues: Many existing portable magnets produce "transversal" fields. This makes them incompatible with the advanced multi-channel "long-bore" technologies (like surface coils) that have been perfected for standard hospital MRI scanners over the last few decades.

Furthermore, many high-performance magnet designs require custom-shaped, expensive magnetic components that are difficult to manufacture and assemble.

A Novel Sparse Array Design

To address these limitations, the researchers propose a sparse cylindrical PMA based on "inward-outward" (IO) ring pairs. By designing the field to point along the axis of the cylinder (longitudinal) rather than across it (transversal), the design ensures compatibility with high-efficiency RF coils developed for traditional superconducting MRIs.

3D visualization of the proposed sparse PMA design, showing the base, shimming, and sub-gradient arrays.

The system is split into two functional parts:

  • Main Array: A stationary 120.96 kg structure that provides a strong, relatively homogeneous longitudinal background field ($B_0$).
  • Sub-gradient Array: A lightweight (5.12 kg) rotatable array used to encode the spatial signals needed to form an image. By rotating only this small component, the design significantly reduces mechanical requirements and potential for rotation errors.

Physics-Guided Optimization

To optimize this complex arrangement, the authors used a Two-Step Physics-Guided Genetic Algorithm (GA). First, magnetic physics principles were used to narrow down the "search landscape," setting constraints on magnet placement and orientation. Second, they employed a custom-built, accelerated magnet simulator called "MagCraft" to evaluate thousands of design permutations. This allowed them to optimize for field strength, homogeneity, and encoding capability simultaneously while using standard N45 to N52 Neodymium magnet blocks, making the design much cheaper and easier to physically build than those requiring custom materials.

Performance and Imaging Results

The resulting field was validated using analytic calculations and numerical simulations. The encoding capability of the designed PMA was examined by checking the quality of simulated reconstructed images of the Shepp-Logan phantom.

Definition of the 3D Field of View (FoV) slices along the z-axis used for performance evaluation.

Key results include:

  • Field Strength: Achieved an average of 111.40 mT, a significant step up for portable head-imaging systems.
  • Efficiency: The design reached a magnetic field generation efficiency of 0.88 mT/kg, the highest among sparse PMAs offering monotonic field patterns.
  • Compact Footprint: The 5-gauss safety range is only 87 × 87 × 104 cm³, meaning it can operate safely in very tight spaces.
  • Image Quality: Reconstructed images achieved a Structural Similarity Index (SSIM) of up to 0.836, with the monotonic field pattern actually outperforming perfectly linear gradients in certain scenarios.

Conclusion

The proposed PMA design offers a high-performance, efficient, and mechanically practical solution for portable MRI. By utilizing off-the-shelf components and a longitudinal field orientation, it bridges the gap between portable convenience and the high-performance standards of clinical MRI. Future work will involve the physical implementation and testing of the array in clinical environments to assess thermal stability and assembly precision.

Summary updated

Abstract

A permanent magnet array (PMA) is a preferred source of magnetic field for body-part-dedicated low-field (&lt;0.5 T) portable magnetic resonance imaging (MRI) because it has a small footprint, no power consumption, and no need for a cooling system. The current popular PMA is limited by the transversal field below 100 mT, where advanced technologies developed for the long-bore MRI systems (e.g., multi-channel techniques) cannot be applied. In this paper, a sparse high-performance PMA is proposed based on inward-outward ring pairs and using magnet blocks that can be bought off the shelf, targeting on portable head imaging. Through a fast genetic algorithm (GA)-based optimization, the proposed PMA has a longitudinal magnetic field with an average field strength of 111.40 mT and a monotonic field pattern with inhomogeneity of 10.57 mT (an RF bandwidth of &lt;10%) within a Field of View (FoV) of 20 cm in diameter and 4.5 cm in length. The resulting field was validated using analytic calculations and numerical simulations. The encoding capability of the designed PMA was examined by checking the quality of the simulated reconstructed images. The proposed field outperforms a linear pattern for encoding. The PMA is 57.91 cm wide, 38 cm long, has a 5-gauss range of 87x87x104 cm^3, allowing an operation in a small space. It weights 126.08kg, comprising of a stationary main array that supplies a strong homogeneous field, and a light rotatable sub-gradient-array (5.12kg) that supplies a monotonic field for signal encoding. It has a magnetic field generation efficiency of 0.88mT/kg, the highest among sparse PMAs that offer a monotonic field pattern. The force experienced by each magnet was calculated to validate the feasibility of physical implementation. The proposed PMA can be a promising alternative to supply the main and gradient fields combined for dedicated portable MRI.
BibTeX
@article{liang2022high,
  author = {Ting-Ou Liang and Yan Hao Koh and Tie Qiu and Er‐Ping Li and Wenwei Yu and Shao Ying Huang},
  title = {{High-Performance Permanent Magnet Array Design by a Fast Genetic Algorithm (GA)-based Optimization for Low-Field Portable MRI}},
  journal = {Journal of Magnetic Resonance},
  year = {2022},
  doi = {10.1016/j.jmr.2022.107309},
}
Figure