Abstract
Joint communications and sensing (JCAS) is potentially a hallmark technology for the sixth generation mobile network (6G). Most existing JCAS designs are based on digital arrays, analog arrays with tunable phase shifters, or hybrid arrays, which are effective but are generally complicated to design and power inefficient. This article introduces the energy-efficient and easy-to-design multi-beam antenna arrays (MBAAs) for JCAS. Using pre-designed and fixed analog devices, such as lens or Butler matrix, MBAA can simultaneously steer multiple beams yet with negligible power consumption compared with other techniques. Moreover, MBAAs enable flexible beam synthesis, accurate angle-of-arrival estimation, and easy handling/utilization of the beam squint effect. All these features have not been well captured by the JACS community yet. To promote the awareness of them, we intuitively illustrate them and also exploit them for constructing a multi-beam JCAS framework. Finally, the challenges and opportunities are discussed to foster the development of green JCAS systems.
Introduction
As the telecommunications industry pivots toward 6G, Joint Communications and Sensing (JCAS) has emerged as a critical capability, allowing networks to perceive their physical environment while maintaining high-speed data links. However, the current trajectory of JCAS development relies heavily on massive MIMO arrays equipped with thousands of active, tunable phase shifters. These components are significant "power hogs," leading to high hardware complexity and substantial energy consumption. To achieve a sustainable or "green" 6G, a shift toward more energy-efficient hardware architectures is essential.
Hardware Architecture for Green JCAS
The proposed solution centers on Multi-Beam Antenna Arrays (MBAAs). Unlike traditional phased arrays that utilize active electronics to steer beams dynamically, MBAAs leverage passive, fixed analog structures. Common implementations include Lens Antenna Arrays, which use quasi-optical lenses to focus electromagnetic waves, and Butler Matrices, which employ a network of fixed couplers to perform hardware-based Discrete Fourier Transforms (DFT).
By replacing thousands of multi-bit phase shifters with passive structures and simple 1-bit switches, MBAAs drastically reduce the system's power floor. For a typical 64-antenna array with 8 RF chains, this transition can save approximately 10.24 Watts—a significant margin for large-scale deployments.
Technical Innovations in MBAA-based JCAS
Flexible Beam Synthesis
While MBAAs use fixed beams, they are not rigid. By employing a simple beam selection network and 1-bit phase shifters (providing 0 or $\pi$ shifts), multiple adjacent beams can be combined to synthesize wider or specifically shaped mainlobes. A notable technique is the "base-2 wide beam" synthesis, which combines two adjacent beams to eliminate the "dip" in gain between them, resulting in a 6 dB improvement in beamforming gain at those intersections.
Exploiting the Beam Squint Effect
In wideband systems, "beam squint" refers to the phenomenon where the beam direction shifts slightly as a function of frequency. While typically viewed as a distortion to be corrected, this paper frames it as a "blessing" for sensing.
By utilizing this frequency-dependent shift as a "spatial-frequency signature," a single wideband transmission can effectively "scan" an angular region without physical movement. The received power profile across the frequency band then allows for rapid target localization with minimal computational overhead.
Physical Layer Secrecy
The framework also introduces Type-2 JCAS beams, which randomly select sensing beams in each time slot. This approach "scrambles" the signal in directions not intended for users, providing inherent physical layer security against potential eavesdroppers.
Performance and Results
Numerical simulations validate the efficiency of the MBAA framework. Beyond the 10.24W power saving, the system achieves high-accuracy Angle-of-Arrival (AoA) estimation through a low-complexity ratio-based method (using the sum and difference of synthesized beams). This approach is significantly lighter than traditional super-resolution algorithms like MUSIC or ESPRIT, making it ideal for real-time 6G applications.
Challenges and Future Directions
Despite its advantages, MBAA technology faces several hurdles:
- Discrete States: The finite number of fixed beams limits steering resolution compared to fully digital arrays.
- Beam Selection Complexity: Optimizing beam subsets for multiple users remains an NP-hard challenge.
- Waveform Design: New waveforms are needed to specifically exploit the unique spatial-frequency patterns of MBAAs.
- Integration: The physical footprint of lenses and Butler matrices may limit their use to base stations and larger infrastructure rather than compact mobile handsets.
In conclusion, MBAAs offer a compelling path toward "green" JCAS, balancing high-performance sensing and communication with unprecedented energy efficiency.
Summary updated