Goal-Oriented Quantization: Analysis, Design, and Application to Resource Allocation

Hang Zou, Chao Zhang, Samson Lasaulce, Lucas Saludjian, H. Vincent Poor

Abstract

In this paper, we consider the situation in which a receiver must execute a task based on a quantized version of an information source. The task is modeled as the minimization of a general goal function $f(x;g)$, where the decision $x$ is derived from quantized parameters $g$. This problem is highly relevant to applications such as radio resource allocation (RA), high spectral efficiency communications, and smart grid data clustering. By employing high-resolution (HR) analysis, we demonstrate how to design a quantizer that minimizes the "Optimality Loss" (OL)—the performance gap between a decision made with perfect information and one made with quantized data. Our analysis provides both theoretical strategies for the HR regime and a practical algorithm for general use, revealing a fundamental relationship between goal function regularity and quantization difficulty.

Introduction

In classical communication theory, the primary objective is reliability: minimizing the Mean Squared Error (MSE) or distortion to ensure the received signal matches the original as closely as possible. However, in modern systems like 6G, the Internet of Things (IoT), and smart grids, data is often a means to an end rather than the end itself. For instance, a sensor might transmit high-resolution data to a receiver that only needs to make a binary decision. In such cases, the bottleneck is not signal reconstruction, but the quality of the downstream decision.

This paper introduces Goal-Oriented Quantization (GOQ), a framework that optimizes compression specifically for the mission at hand. Instead of minimizing reconstruction error, GOQ minimizes the loss in the final optimization task.

The Goal-Oriented Quantization Framework

The core of the GOQ approach is to model the system as a pipeline where parameters $g$ are passed through a quantizer $Q(g)$ before reaching a decision maker. The decision maker then solves an optimization problem to find the best action $x$ based on the quantized input.

System model of Goal-Oriented Quantization showing the flow from parameters to the final optimization task.

High-Resolution Analysis

To design optimal quantizers, we employ High Resolution (HR) analysis, a mathematical regime where the number of quantization levels is assumed to be large. This allows us to treat discrete quantization points as a continuous density function.

  1. Scalar GOQ: For one-dimensional parameters, we derive an analytical formula for the optimal quantization density. Unlike traditional methods, this density depends not only on the probability distribution of the data but also on the sensitivity of the goal function to changes in those parameters.
  2. Vector GOQ: For multi-dimensional data, such as daily power consumption patterns, we utilize Gersho’s Hypothesis to find performance loss bounds, assuming optimal quantization cells resemble regular polytopes.
  3. Practical Algorithm: We propose an alternating optimization algorithm that iteratively updates quantization regions and representatives based on the specific goal function, even when underlying statistics are unknown.

Key Insights: Sensitivity vs. Probability

A critical finding of this research is that sensitivity is more important than probability. Traditional quantizers allocate the highest resolution to the most frequent data points. In contrast, GOQ prioritizes resolution where the decision is most sensitive. If a small change in a rare parameter value leads to a significant change in the optimal strategy, GOQ will ensure that value is quantized finely.

Furthermore, we identify a "hardness" factor for quantization. Some tasks are naturally more robust; for example, logarithmic functions (common in spectral efficiency) are easier to quantize than exponential functions (common in energy efficiency), which are more "brittle" and require higher precision.

Performance and Function Sensitivity

The performance gains of GOQ are most evident when compared to standard distortion-based quantization (such as the Lloyd-Max algorithm). The following table illustrates how different goal functions $f(x;g)$ result in varying levels of Optimality Loss (OL) under different quantization strategies.

Table comparing Optimality Loss (OL) across various goal functions and probability density functions.

Numerical Results

  • Control Systems: In a quadratic control task with only 5 quantization regions, standard quantization resulted in a 70% performance loss, whereas GOQ limited the loss to 10%.
  • Smart Grids: To achieve a 5% optimality loss in power scheduling, standard clustering required 80 clusters. GOQ achieved the same performance with only 8 clusters—a 10x improvement in efficiency.
  • Wireless Efficiency: For spectral efficiency tasks, even a 1-bit quantizer resulted in only a ~2% performance loss, suggesting that current feedback mechanisms in wireless networks may be over-engineered.

Conclusion

Goal-Oriented Quantization represents a shift toward task-aware communication. By tailoring compression to the final optimization goal, we can significantly reduce bandwidth requirements without sacrificing decision quality. While current theoretical models assume smooth, differentiable goal functions, the practical algorithms developed here show great promise for real-world, data-driven applications in 6G and beyond. Future work will explore adaptive GOQ for non-stationary environments and multi-objective tasks.

Summary updated

Abstract

In this paper, the situation in which a receiver has to execute a task from a quantized version of the information source of interest is considered. The task is modeled by the minimization problem of a general goal function <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$f(x;g)$ </tex-math></inline-formula> for which the decision <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$x$ </tex-math></inline-formula> has to be taken from a quantized version of the parameters <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$g$ </tex-math></inline-formula> . This problem is relevant in many applications, e.g., for radio resource allocation (RA), high spectral efficiency communications, controlled systems, or data clustering in the smart grid. By resorting to high resolution (HR) analysis, it is shown how to design a quantizer that minimizes the gap between the minimum of <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$f$ </tex-math></inline-formula> (which would be reached by knowing <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$g$ </tex-math></inline-formula> perfectly) and what is effectively reached with a quantized <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$g$ </tex-math></inline-formula> . The conducted formal analysis both provides quantization strategies in the HR regime and insights for the general regime and allows a practical algorithm to be designed. The analysis also allows one to provide some elements to the new and fundamental problem of the relationship between the goal function regularity properties and the hardness to quantize its parameters. The derived results are discussed and supported by a rich numerical performance analysis in which known RA goal functions are studied and allows one to exhibit very significant improvements by tailoring the quantization operation to the final task.
BibTeX
@article{zou2022goal,
  author = {Hang Zou and Chao Zhang and Samson Lasaulce and Lucas Saludjian and H. Vincent Poor},
  title = {{Goal-Oriented Quantization: Analysis, Design, and Application to Resource Allocation}},
  journal = {IEEE Journal on Selected Areas in Communications},
  year = {2022},
  doi = {10.1109/jsac.2022.3221976},
}
Figure