Global Estimation of Building-Integrated Facade and Rooftop Photovoltaic Potential by Integrating 3D Building Footprint and Spatio-Temporal Datasets

Qing Yu, Kechuan Dong, Zhiling Guo, Jiaxing Li, Hongjun Tan, Yanxiu Jin, Jian Yuan, Haoran Zhang, Junwei Liu, Qi Chen, Jinyue Yan

Abstract: This research tackles the challenges of estimating Building-Integrated Photovoltaics (BIPV) potential across various temporal and spatial scales, accounting for different geographical climates and urban morphology. We introduce a holistic methodology for evaluating BIPV potential, integrating 3D building footprint models with diverse meteorological data sources to account for dynamic shadow effects. The approach enables the assessment of PV potential on facades and rooftops at different levels—individual buildings, urban blocks, and cities globally. Through an analysis of 120 typical cities, we highlight the importance of 3D building forms, cityscape morphology, and geographic positioning in measuring BIPV potential. Our simulation study reveals that among cities with optimal facade PV performance, the average ratio of facade PV potential to rooftop PV potential is approximately 68.2%. Additionally, approximately 17.5% of the analyzed samples demonstrate even higher facade PV potentials compared to rooftop installations, underscoring the strategic value of incorporating facade PV applications into urban sustainable energy systems.

Introduction

As cities strive for carbon neutrality, solar energy is a primary tool. However, most existing global assessments focus almost exclusively on rooftops. In densely populated "vertical" cities, the surface area of facades is significantly larger than that of roofs, yet estimating their potential is notoriously difficult. The primary challenge is shading. Unlike rooftops, which generally have a clear view of the sky, facades are constantly subjected to complex, dynamic shadows cast by neighboring buildings. Without accounting for these 3D urban morphologies and how they interact with the sun’s path throughout the year, any estimate of Building-Integrated Photovoltaics (BIPV) is likely to be inaccurate. This paper introduces a scalable framework to calculate these effects from individual buildings to entire global metropolises.

Methodology

The authors developed a multi-stage simulation pipeline integrated into an open-source Python library, pybdshadow. The process begins with Shadow Casting, using 3D building footprint data (sourced from Mapbox, OpenStreetMap, and Tencent Maps) to calculate geometric shadow projections. By decomposing building structures into individual facades and rooftops, the model identifies specific shadow types—roof, ground, and facade—at any given time and geographical location.

Figure 5: Classification of shadow types (roof, ground, and facade) within an urban block model, illustrating the complexity of urban shading.

Following shadow analysis, the model performs Solar Insolation Modeling. It integrates meteorological data from the National Solar Radiation Database (NSRDB) and applies a "Plane of Array" (POA) calculation to determine irradiance on vertical and horizontal surfaces. Finally, PV Generation Estimation is conducted using the pvlib library, simulating actual electricity yield while accounting for variables like tilt angles, ambient temperature, wind speed, and the lower conversion efficiency typically associated with facade-integrated panels (set at 68% of rooftop efficiency). The model's accuracy was validated against real-world PV output from 60 rooftop stations at the Hong Kong University of Science and Technology (HKUST).

Key Results and Global Assessment

The study analyzed 120 typical cities globally to measure BIPV potential. A key finding is the "Vertical Advantage" in high-density cities. In locations like Hong Kong, Singapore, and Shenzhen, facade PV potential reaches 216.8%, 201.7%, and 200.4% of rooftop potential, respectively. This flips the traditional "roof-first" solar strategy on its head.

Figure 2: Large-scale city-wide solar insolation mapping, demonstrating the spatial distribution of solar potential across complex urban morphology.

Across the 120 cities, the average ratio of facade PV potential to rooftop potential is 68.2%. Notably, in approximately 17.5% of the analyzed urban samples, facade potential actually outperformed rooftop installations. The research also highlights that while rooftop potential is highly sensitive to latitude, facade potential remains relatively uniform across the 0–40 degree range. This is because, at higher latitudes, the lower sun angle hits vertical walls more directly for longer periods.

Conclusion

This research underscores the strategic value of incorporating facade PV applications into urban sustainable energy systems. While urban morphology (building height and density) is the dominant factor for facade potential, the sheer surface area of high-rise districts often compensates for shading-induced efficiency losses. Future work will aim to refine building geometries, incorporate "urban canyon" reflections, and integrate economic and policy factors to move from physical potential to economic viability.

Summary updated

Abstract

This research tackles the challenges of estimating Building-Integrated Photovoltaics (BIPV) potential across various temporal and spatial scales, accounting for different geographical climates and urban morphology. We introduce a holistic methodology for evaluating BIPV potential, integrating 3D building footprint models with diverse meteorological data sources to account for dynamic shadow effects. The approach enables the assessment of PV potential on facades and rooftops at different levels-individual buildings, urban blocks, and cities globally. Through an analysis of 120 typical cities, we highlight the importance of 3D building forms, cityscape morphology, and geographic positioning in measuring BIPV potential at various levels. In particular, our simulation study reveals that among cities with optimal facade PV performance, the average ratio of facade PV potential to rooftop PV potential is approximately 68.2%. Additionally, approximately 17.5% of the analyzed samples demonstrate even higher facade PV potentials compared to rooftop installations. This finding underscores the strategic value of incorporating facade PV applications into urban sustainable energy systems.
BibTeX
@inproceedings{yu2025global,
  author = {Qing Yu and Kechuan Dong and Zhiling Guo and Jiaxing Li and Hongjun Tan and Yanxiu Jin and Jian Yuan and Haoran Zhang and Junwei Liu and Qi Chen and Jinyue Yan},
  title = {{Global Estimation of Building-Integrated Facade and Rooftop Photovoltaic Potential by Integrating 3D Building Footprint and Spatio-Temporal Datasets}},
  booktitle = {Nexus},
  year = {2025},
  doi = {10.1016/j.ynexs.2025.100060},
}
Figure