Generalized Omega Turn Gait Enables Agile Limbless Robot Turning in Complex Environments

Tianyu Wang, Baxi Chong, Yuelin Deng, Ruijie Fu, Howie Choset, Daniel I. Goldman

Abstract

Reorientation (turning in plane) plays a critical role for all robots in any field application, especially those in confined spaces. While important, reorientation remains a relatively unstudied problem for robots, including limbless mechanisms, often called snake robots. Instead of looking at snakes, we take inspiration from observations of the turning behavior of tiny nematode worms C. elegans. Our previous work presented an in-place and in-plane turning gait for limbless robots, called an omega turn, and prescribed it using a novel two-wave template. In this work, we advance omega turn-inspired controllers in three aspects: 1) we use geometric methods to vary joint angle amplitudes and forward wave spatial frequency in our turning equation to establish a wide and precise amplitude modulation and frequency modulation on omega turn; 2) we use this new relationship to enable robots with fewer internal degrees of freedom (i.e., fewer joints in the body) to achieve desirable performance, and 3) we apply compliant control methods to this relationship to handle unmodelled effects in the environment. We experimentally validate our approach on a limbless robot that the omega turn can produce effective and robust turning motion in various types of environments, such as granular media and rock pile.

Introduction

Limbless robots are uniquely suited for navigating highly confined and unstructured environments, such as disaster rubble or narrow industrial piping. However, their ability to reorient—turning in place—is often a bottleneck for true agility. Traditional turning strategies, like the "offset turn" which adds a constant curvature to a slithering wave, often fail in dense clutter or loose terrain like sand. In these scenarios, a robot might become wedged or lose traction, rendering simple open-loop gaits ineffective.

Bio-inspired omega turn in C. elegans and its robotic implementation across diverse terrains.

To address this, we look to the nematode worm C. elegans, which executes a sharp "omega turn" to reverse direction. By decoupling the forward locomotive wave from a specific turning wave, we can create a highly maneuverable, tunable, and robust turning strategy that works across various robot body lengths and unpredictable environments.

Methodology

The "omega turn" template superimposes two coplanar traveling waves: a forward wave and an omega (turning) wave. This results in an $\Omega$-like body shape where the robot's head sweeps near its tail. We generalized this template through three technical advancements:

1. Geometric Mechanics for Optimization

We mapped the robot's shape variables into a 4D shape space to optimize the gait path. By calculating "infeasible regions" where the robot would collide with itself or exceed joint limits, we can identify the most efficient paths for rotational displacement per cycle.

Geometric shape space analysis identifying self-collision regions (blue) to optimize the turning gait path.

2. Parameter Modulation

We systematically varied joint angle amplitudes and spatial frequencies. This allows for precise modulation of the turning angle. Crucially, we found that shorter robots (with fewer joints) can still execute effective omega turns by lowering the spatial frequency of the omega wave, making the gait hardware-agnostic.

3. Compliant Control

To navigate complex clutter, we implemented an admittance control framework. By treating wave parameters as a virtual spring-mass-damper system driven by joint torque feedback, the robot's body can "yield" to obstacles. This prevents jamming and allows the robot to slither through resistance rather than fighting it.

Results and Discussion

Experimental validation was conducted using a 16-joint limbless robot across various terrains.

  • Tunability: Modulating joint amplitudes between $60^\circ$ and $90^\circ$ allowed for a continuous turning range of $88^\circ$ per cycle (from $20^\circ$ to $108^\circ$), doubling the range of traditional methods.
  • Granular Media Performance: On a bed of plastic spheres, the omega turn achieved $78.5^\circ$ per cycle, while traditional offset and geometric turns were nearly useless ($<5^\circ$).
  • Obstacle Navigation: In pegboard tests, compliant control increased angular displacement by ~30% and significantly reduced the frequency of jams.
  • Real-World Robustness: In outdoor tests on rock piles, the robot maintained a robust $100.1^\circ \pm 6.4^\circ$ turn per cycle, demonstrating performance nearly identical to flat-ground results.

Conclusion

The generalized omega turn provides a powerful tool for limbless robot agility. By combining bio-inspired templates with geometric optimization and compliant control, we enable robots to navigate and reorient in the most challenging terrains. Future work will focus on 3D environments and developing seamless transitions between forward locomotion and turning gaits for fully autonomous operation.

Summary updated

Abstract

Reorientation (turning in plane) plays a critical role for all robots in any field application, especially those that in confined spaces. While important, reorientation remains a relatively unstudied problem for robots, including limbless mechanisms, often called snake robots. Instead of looking at snakes, we take inspiration from observations of the turning behavior of tiny nematode worms C. elegans. Our previous work presented an in-place and in-plane turning gait for limbless robots, called an omega turn, and prescribed it using a novel two-wave template. In this work, we advance omega turn-inspired controllers in three aspects: 1) we use geometric methods to vary joint angle amplitudes and forward wave spatial frequency in our turning equation to establish a wide and precise amplitude modulation and frequency modulation on omega turn; 2) we use this new relationship to enable robots with fewer internal degrees of freedom (i.e., fewer joints in the body) to achieve desirable performance, and 3) we apply compliant control methods to this relationship to handle unmodelled effects in the environment. We experimentally validate our approach on a limbless robot that the omega turn can produce effective and robust turning motion in various types of environments, such as granular media and rock pile.
BibTeX
@inproceedings{wang2022generalized,
  author = {Tianyu Wang and Baxi Chong and Yuelin Deng and Ruijie Fu and Howie Choset and Daniel I. Goldman},
  title = {{Generalized Omega Turn Gait Enables Agile Limbless Robot Turning in Complex Environments}},
  booktitle = {IEEE International Conference on Robotics and Automation},
  year = {2022},
  url = {https://openreview.net/forum?id=SZYT1rTNROv},
}
Figure