Forced Convection Over a Three-Dimensional Horizontal Backward Facing Step

Juan Gabriel Barbosa Saldaña, N. K. Anand, V. SarinInternational Journal for Computational Methods in Engineering Science and Mechanics 2005 · DOI

TL;DR

This paper presents a numerical study of forced convection over a 3D backward-facing step, a common phenomenon in industrial applications. By validating their finite volume method code against experimental data, the authors provide valuable insights into flow separation, reattachment, and heat transfer characteristics across various Reynolds numbers, contributing to a better understanding of this complex flow problem.

What Problem Does This Paper Address?

The flow over a backward-facing step is a fundamental yet complex fluid dynamics problem that appears in numerous industrial applications, such as cooling systems, combustion chambers, and diffusers. While the basic geometry is simple, the resulting flow structures, including separation, recirculation, and reattachment, are intricate and not fully understood, especially in three dimensions and under convective heat transfer conditions. This paper aims to provide a detailed numerical investigation of such a flow, focusing on the interplay between fluid dynamics and heat transfer, and to offer a validated computational tool for further research and design.

Methods

The authors employed a finite volume technique to discretize the governing momentum and energy equations. The SIMPLE algorithm was used to couple pressure and velocity fields, while a line-by-line scheme handled the computation of velocity, pressure, and temperature distributions within each plane. A FORTRAN code was developed for this purpose. The numerical scheme was validated against experimental data from existing literature to ensure its accuracy. Grid independence was established by monitoring the location of zero streamwise wall shear stress.

Datasets

The study utilized experimental data from Armaly et al. (2003) for validation purposes. Specifically, measurements of the streamwise wall shear stress and u-velocity components were used to compare with the numerical predictions. No new datasets or benchmarks were introduced in this paper.

Key Insights and Ideas

  • Three-dimensionality matters: The study highlights that even with a relatively simple geometry, the flow over a backward-facing step exhibits significant three-dimensional behavior, influencing separation and reattachment patterns.
  • Recirculation zone dynamics: The size and behavior of the recirculation zone are strongly dependent on the Reynolds number, shifting downstream and becoming more pronounced as Re increases.
  • Heat transfer correlation: The Nusselt number distribution is closely linked to the flow structures. The peak heat transfer occurs within the recirculation zone, and its location shifts downstream with increasing Reynolds number.
  • Shear stress as an indicator: The points where the streamwise wall shear stress is zero (xu-line) are found to be closely related to the edge of the recirculation zone and the reattachment points.
  • Validation is key: The rigorous validation of the numerical code against experimental data provides confidence in the obtained results and establishes its utility for future studies.

Key Results

  • The numerical code was successfully validated against experimental data for Reynolds numbers of 343 and 512.
  • The study explored flow behavior for Reynolds numbers ranging from 98.5 to 512.
  • The xu-line (where streamwise wall shear stress is zero) shifts downstream with increasing Reynolds number, with variations in the spanwise direction.
  • Spanwise average Nusselt numbers increase with higher Reynolds numbers, with peak heat transfer occurring within the recirculation zone.
  • For Reynolds numbers greater than 343, the flow does not reach fully developed conditions at the channel exit.

Limitations and Future Work

The authors acknowledge that for Reynolds numbers greater than 343, the flow does not achieve fully developed conditions at the channel exit. Furthermore, the study did not reach thermally fully developed flow conditions for any of the cases. Future work could explore higher Reynolds numbers, different heat flux conditions, or variations in geometry to further understand the complex phenomena associated with backward-facing steps. The established validated code can serve as a foundation for such investigations.

Summary updated

Abstract

Forced convective flow over a 3-D backward-facing step is studied numerically. The momentum and energy equations were discretized by means of a finite volume technique. The SIMPLE algorithm scheme was used to link the pressure and velocity fields in the entire domain and a line-by-line scheme was used in each plane to compute the velocity, pressure, and temperature field distributions. The code was validated by comparing numerical predictions with experimental data for flow over a 3-D backward facing step that is available in the literature. Flow of air (Pr = 0.70) over a three-dimensional horizontal backward-facing step geometry with an aspect ratio AR = 8 and an expansion ratio ER = 2 was considered. The stepped wall downstream of the expansion was heated by subjecting it to a constant heat flux (qw = 50 Wm−2) and the other walls were considered as insulated. The inlet flow was taken to be hydro-dynamically fully developed with a uniform temperature profile. Locations where the streamwise velocity and the spanwise velocity components are zero for the nearest plane adjacent to the stepped wall were plotted for different Reynolds numbers. Distributions for local and average Nusselt number for the stepped wall, and graphical representations for u, v, and w velocities components obtained in these simulations are presented in the paper. Keywords: Backward Facing StepReattachmentRecirculationSeparation Acknowledgments Financial support for this work by ANIUS, Mexico, is gratefully acknowledged.
BibTeX
@article{saldana2005forced,
  author = {Juan Gabriel Barbosa Saldaña and N. K. Anand and V. Sarin},
  title = {{Forced Convection Over a Three-Dimensional Horizontal Backward Facing Step}},
  journal = {International Journal for Computational Methods in Engineering Science and Mechanics},
  year = {2005},
  doi = {10.1080/155022891009107},
}
Figure